HT204291 My apple tv is not airplaying to any of my devices - the airplay icon is completely gone! I've reset apple tv, checked home sharing is on, checked my wifi connection is active but still no luck? any suggestions would be greatly appreciated:)
- the airplay icon is completely gone! I've reset apple tv, checked home sharing is on, checked my wifi connection is active, no firewalls, but still no luck? any suggestions would be greatly appreciated:)
What IOS and OS are you using Elissa. I think from your post it used to work but has dropped off, is that correct or has it never worked? If it did wotk has anything changed? Check your wifi use with sopmething like istumbler to see if it is being used by neighbours etc?
Similar Messages
-
I have just got a replacement iphone 5 but I can't restore my old backup that is ios7 because the replacement is ios6 I have changed my UDID on the developer site but still no luck any suggestions anyone?
You are in breach of your Developer agreement by posting in a Public forum
-
My iPhone 4S is not showing up in iTunes. I've never had this issue before, and I'm finding it a little frustrating trying to figure out how to rectify the situation. If anyone knows how to fix this problem, please advise. Otherwise any suggestions would be greatly appreciated.
Hi Josie,
I understand that you are having issues with iTunes recognizing your iPhone 4S. Let's see if we can tackle this.
The following resource will provide helpful steps in resolving this issue, pay specific attention to Steps 3-6 as these usually resolve this sort of issue.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M. -
My iPad 2 won't charge and it's completely shut down. I've tried pressing the two buttons simultaneously, but nothing works. It's driving me crazy! Any offers of suggestions would be greatly appreciated. Thanks!
1. The most efficient way to charge an iPad is with the charger that came with the iPad and having that plugged into a wall outlet. Trying to charge while connected to a laptop often doesn't work because the USB port may not provide enough power.
2. Once an iPad battery has completely drained it may take an hour or more on the wall charger before the iPad responds. So after an hour on the charger reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
3. If the iPad still does not start up make an appt at the Apple store. It will be far better if you have an appointment rather than just walking in because those with appointments will be taken care of before you are. -
my Apple id is not working on itunes store....itunes reply (please review your account information.....) And Demanding Credit Card Information.....But I dnt Have Any Credit Card......
For the CC type, select None and verify your name and address.
-
i can't download nor purchase anything from the app store/ itunes store.
it continues to tell me to update payment info and so i do and still no luck, any advice?Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page, but I can't work out how to do it - any suggestions would be greatly appreciated
brendanfromsydney wrote:
What are the different opinions on why pages should not achieve this?
As far as I know, Apple is free to choose to offer this or that feature.
They never said that they want to clone Word or even compete with it.
Differences between tables in both worlds are numerous.
In Pages (or Numbers)
- we can't sort a single column
- we can't sort by row
- we can't insert or remove a single cell
- a cell can't cross pages boundaries
If I understand well these design choices match :
++-+-+-+-+-+-+-+-++
Apple Human Interface Guidelines:
Apply the 80 Percent Solution
During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
+-+-+-+-+-+-+-+-+-++
Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
My second generation iPod Nano screen went completly blank. It plays, lights up, but I'm unable to read anything...100% white. Has anyone confronted this issue before? Could it be battery related? Suggestions for solving this would be greatly appreciated. Thanks,
dieo99daniel wrote:
My second generation iPod Nano screen went completly blank. It plays, lights up, but I'm unable to read anything...100% white. Has anyone confronted this issue before? Could it be battery related? Suggestions for solving this would be greatly appreciated. Thanks,
Please describe in detail all you have attempted to do in order to resolve the issue. Don't want to repeat what you have already tried. -
Hello! I submitted my podcast (The Maggy Thump Show) to Itunes about a month ago, I
haven't received any correspondence yet. Is this typical? Please help! Any information,
suggestions would be really helpful. ThanksHey braswell4AU: I have a similar issue. I purchased 2 iPhone 5's the first day they came out. Black 64gb for myself and white 32gb for my wife. She is having somewhat the same issues as you have. Wifi is weak and keeps dropping the signal, and also her phone almost never has LTE. And we are in a very strong Verizon LTE area in north Los Angeles county. My phone has never had any signal issues, wifi or LTE. I have been researching the issue to no avail. I though maybe the white with the brushed alluminum may cause signal issues, but haven't found anything on that and posts about the black one haven't problems blew that theory up.
I have also changed the SIM card and the phone itself and still the same problem. I saw a post about someone getting their phone swapped out and the apple rep told him not to restore the phone, but to just set it up as new. I have yet to try it, gonna try this weekend.. But it makes sense! I, like you have 6 apple devices (2 iPhone 5's, 2 iPhone 4's apple tv3, and the ipad3) and have no issues running all my devices via router.
So I am thinking about the history of the restores and backups and my wife is the only one that went from the 4 to the 5.. Every other device was setup as new. So my theory is that he iphone 5 has issues when you restore from previous backups.. Maybe something a little different from the backups of the previous models create issues in the iPhone 5's?
Like I said, I'm going to give it a shot this weekend and see what happens. If you get a chance to try this before, please let me know if it works and if I try before you I will update you.
Good luck and hopefully we can get these wonderful phones working like they should!
Nate -
Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get her Home Sharing account transferred over to mine so that I can use it with my PC? Thanks!
As Winston Churchill wrote, however you might want to do a factory reset on the Apple TV.
This way all information pertaining to your daughter will be removed from the device. Specifically if see was sign into any of the streaming service, Netflix, Hulu, etc. her credentials will still be associated with this Apple TV, doing a factory reset will remove all that and make it as if you purchased the device and just plugged it in.
regards -
WiFi Connection timeout error, but still connecting
Since upgrading to Lion I've been having a strange problem. When I connect to a new WiFi hotspot I've been getting an error message suggesting that I have failed to connect, but in reality I have been connected. This happened today at an Apple Store, an office, and when I returned home. It might be related to trying to connect right after waking the computer from sleep, but this never happened with Snow Leopard. Any ideas?
How far do you get in Network Diagnostics? Any difference if you disconnect all other wireless clients?
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network. -
When I open a new tab, I just want it to be blank. I think it may be hijacked but I can't find how to delete/erase the internet search that pops up instead. It's called internet search and just has a magnifying glass as a logo.
Clearing the cache fixed this for me. Before doing this though, I HIGHLY recommend booting into safe mode (assuming you are using Windows) and run the latest version of Malwarebytes' Anti-Malware [http://www.malwarebytes.org/mbam.php].
UPDATE: Well...that worked for a while. That page is back. I still recommend scanning your machine if you have not yet done so.
UPDATE 2: I've found that the application causing the issue is "Cartoonly", which you should see as an extension. You can't remove it from Firefox, you can only disable it. Search your entire computer for "Cartoonly" (even if you have ran MBAM as suggested above) and delete EVERYTHING having to do with that garbage. Your new tabs should be clean and the extension should be gone as well. :) -
iTunes shows the iPod is connected but doesn't show it in the drop down menu under Devices, and the "sync" option is grayed out, so I can't sync the nano with iTunes. I ran the diagnostic tests and it shows the device is connected, but it failed the sync test - it said nothing was connected, even though it passed the connectivity test. We've had the iPod for a few months but this is the first time we've tried to do anything with it. It's fully charged but just won't sync. I turned it off, turned it on. I reset it. I restarted the computer. I'm not sure where to go from here.
A couple of things to check:
Are there any backups listed in iTunes/settings/devices? Since backing up is the first step of the sync process, iTunes might be stuck trying to read the content of the last backup in order to replace it with the new one.
Copy the whole backup folder to a safe place, delete the backup from the list afterwards and make sure that the folder has no content after that. The folder is located here:
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
If you do not see the AppData or Application Data folders, you may need to show hidden files
After that, make sure autosync is disabled in iTunes, connect your ipod, right click on it in the device list and choose "backup". If you can backup manually, transfer your purchases the same way, to copy apps and purchased media to your iTunes. If this worked, you should be able to sync again.
To speed up the sync process, copy your photos to your computer prior to the sync and delete them on your ipod before you start.
Message was edited by: Ingo2711 -
Please Help!
If the steps on the support site failed to correct the issue, it notes that the issue is likely hardware related with the iPod's hard drive, meaning you'll want to have it serviced/replaced either by Apple or a third party service.
B-rock -
For some reason the option to select switch the audio port to 'input' is not coming up.
Thanks.If your computer is running Snow Leopard, and is not at 10.6.8, you could use
Software Update to get final Combo Update 10.6.8 v. 1.1 for Snow Leopard.
Aside from that (you may have already done so) here is a free-running
application that may help your line-in audio, by the name of LineIn
http://www.rogueamoeba.com/freebies/ and it suggests possibilities.
There also are USB input methods using those for audio; not sure what
is still available, a few great ones no longer were. One from Belkin a few
years ago, called the iMic, offered great options over USB.
Hopefully the free application can help.
Good luck & happy computing!
Maybe you are looking for
-
How to create a form on a tree structured table
Hi, I have a table that is designed to do a tree structure like: Table Name: test Fields: ID ParentID Description I created a browser (IR) (page 1) that calls a form (page 2) The form has the editing fields and at the bottom layer I have a reports r
-
The edit bookmart does not come up when I click on the star
I used to be able to use the Bookmarks pull-down menu and click Bookmark this page Crtl-D and I could pick which folder I wanted to same my bookmark in. Also I could click on the start for a bookmarked page and edit it. Now, neither feature works. It
-
Differentiating Master Data from two different source systems
Friends, i have used standard InfoObjects that provide master data for two InfoCubes which take data from two different source systems. Now the some of the master data is identical in both the source systems (example: 10 stands for "Industrial" in on
-
hi, I have to modify transaction v_nl to accept multiple sold-to-party.On passing multiple customers to FM gn_invoice_create I get the pricing and condition type for all the materials but ai am not able to determine which material ia selected for wh
-
i am using 10.2.8 and the latest version of flash which i have downloaded will not work does anyone know where i can get an earlier version which will work as i have searched everywhere thanks for your help pete