HT204291 When am watching live news on air play it shows only for  one minute 30 seconds I need some help?

When am watching live news on air play it only shows for one minute 30 seconds ,, I need some help?

First of all, Hunt--thanks for responding!
"First, where are you playing the MPEG-2, that you see that jitter?"
On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
"Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
Thanks,
Doug

Similar Messages

  • Calendar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date.

    Calenndar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date month.  How do I do this with the new operating system?

    Adding to Alan's answer:
    One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled. 
    If you weren't using either of E-series board's counters, there is a nifty solution to this!  You'll be using 1 of the counters to generate the variable-rate sampling clock.  You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter.  This gives you a hw-timed measurement of every sampling interval.  You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
    Note:  the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st.  For your app, you should ignore it.
    -Kevin P.

  • Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server.  This just started happening.  When I open a file indesigns is creating a textfile in the same folder?  I need some help on this.

    Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server.  This just started happening.  When I open a file indesigns is creating a textfile in the same folder?  I need some help on this.

    Ask in the ID forum and be much more specific about your configuration. there could be any number of reasons why manifests, temp files or restore files are created.
    Mylenium

  • MY IMAC is from mi-2011; it should have the air play recopie video : I can not see it on my mac but air play is wirking only for audio; I can not watch the screen of my Imac on my TV Why?

    My Imac should be able to get the recopie video via Air play because it is from Mid 2011.
    Nothing work except the audio : Why?

    No way for us to know for sure (without similar product/issues) but the
    HP Support site suggests that with the current Mavericks OS X 10.9.x
    their drivers should be available through Apple Software Updates:
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Product-Support-using- Apple-Software-Updates-for-new-OS-X/td-p/3086229
    However that may be limited to certain models of printers or scanners that
    already had been known to be working under OS X as of that date in a
    prior OS X (such as 10.8.5, 10.7.5, 10.6.8, etc) with earlier product support.
    •Drivers and Downloads for Printers, Scanners, & More - HP Support:
    http://www8.hp.com/us/en/drivers.html
    A link to Mac OS X Support's List Printer & Scanner software (HP+ Other)
    •OS X: Printer and scanner software available for download
    HP Officejet t65 All-in-One Printer
    {According to this page, your old printer has only Windows & Linux drivers
    but you may or may not look into third-party driver support through such
    sites as Gimp; though unlikely to be available with Mavericks, or Yosemite}
    •HP Support Forum - Home:
    http://h30434.www3.hp.com/psg/?lang=en&cc=us
    You may be able to get a deal on a new printer as they are rapidly obsoleted.
    PS: edit to add... there was a Gutenprint driver reference for T65 Printer here:
    Mac OS X 10.5: Included printer drivers
    Yet a driver for ancient Leopard 10.5.x may not be suitable for Mavericks 10.9.x
    but the Gutenprint lead may be helpful to locate whatever may exist; or not.
    https://www.google.com/?gws_rd=ssl#q=gutenprint+mavericks
    Good luck & happy computing!
    edited

  • Setting up Text Message Forwarding but not getting the code. Both iPhone 5 and MacBook Air are up to date with software upgrades. I need some help!!!

    I am trying to update my phone/mac to get the new features but I keep trying to enable Text Message Forwarding but there is no code that pops up on my Mac like the phone says it should. What do I do? Also, my settings icon on my phone keeps showing a little red "1" but the software is up to date. I need some guidance and directi

    Try turning it on from iMessage on your Mac and see if the code entry window pops up on your phone.
    All I had to do was start Messages on my Mac and it told me SMS forwarding was available and gave me the code to enter on my iPhone.
    Also, Apple requires that iMessage/Messages (for SMS forwarding) and FaceTime (for voice call relays) have both your phone number and email available as contacts, so make sure both are selected on both your iPhone and Mac.
    As far as the Settings badge, some people have reported that issue but there's no general case fix as of yet:
    https://discussions.apple.com/thread/6613247

  • I have set a new password today and i cant remember it cause the password i used to get access to my phone is a very hard one to remember i need som help cause this is the first time ever i have encounter

    if anybody can help i would appriecent it cause earlier this morning a deaf guy came across my phone and got access to it so i changed it a few times till i decided to create a hard password that nobody cant remember but since i was being a dumbasss for it i guess its my fault

    LOST PASSCODE
    You should be able to remove the passcode by restoring the device.
    Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
    Right-click the device in the left column and select Back up.
    When the backup is complete, select Restore.
    When finished, restore from your most recent backup.
    Otherwise read this
    If that doesn’t work  you will need to perform a factory restore to remove it. Or read:
    Enter Wrong passcode
    http://support.apple.com/kb/ht1212

  • When playing Bejewelled Blitz and Zuma Blitz on Facebook...there are stops or interruptions during the game play that make it frustrating to play, eacxh game only lasts one minute so this time lost is critical to game play

    there is only one minute to play each of these games so this is critical to game play

    Addition:
    Stupid thing is my computer works fine only internet connected stuff causes TOTAL freezes: nothing works. <CTRL>+<ALT>+<DEL> doesnt react. <ESC> neighter. I can only get my computer to react by "killing" it completely with power shut off ("pull the plug") and starting up from scratch.
    My partners computer is working fine. He also has updated to V10.0.2 And can play the game or do anything else. It happens on my laptop with Windows vista.
    Now Im typing this on an other computer. So the computer details of this one are NOT RELEVANT. Please ignore.
    Because of TOTAL freeze I get NO troubleshooting information.
    The whole screen is a still. Sorry.
    So, now Im pretty sure its FF V10.0.2 cause we've ruled out pretty much everything else and before I go through the whole installation process... This is my LAST hope.
    ANYBODY??? PLEASE HELP ME???

  • Can i trade in my old imac air when i am buying new iMac air???

    can i trade in my old imac air when i am buying new iMac air??? cause the one that i got is 11inch, but it kinds of too small..so i thinking to buy the new one..

    Apple does not accept trade ins.  But you could certainly sell your old machine.  You say "iMac Air", and there is actually no machine with that name.  So get the name right and you can hunt around for what your old machine might be worth.
    One place to look is:
    http://www.apple.com/recycling

  • When I got my new macbook air, apple downloaded my photos on my new laptop from my old laptop, but now i have duplicates photos because when I started icloud, I got duplicates.  How can I delete duplicate photos?

    when I got my new macbook air, apple downloaded my photos on my new laptop from my old laptop, but now i have duplicates photos because when I started icloud, I got duplicates.  How can I delete duplicate photos?

    HI ..
    On the new MBAir, open System Preferences > iCloud
    Deselect the box next to Photo Stream then reselect it then restart your Mac.

  • HT201412 I have a new iPad Air and it is asking for my Passcode which I thought i knew but it is not turning on with the code I thought I entered?

    I have a new iPad Air and it is asking for my Passcode which I thought I knew , but it is not turning on with the code I tought I had entered?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I have a MacBook using Snow Leopard 10.6.8 and iTunes 11.0.1.  When I tether my new iPod Nano, the icon shows on my desktop, but the device does not show up on iTunes.

    I have a MacBook with Snow Leopard 10.6.8 and iTunes 11.0.1.  When I tether my new iPod Nano, the icon shows up on my desktop, but does not show up under devices in iTunes.  The Nano says it is connected and synching, but I cannot download music if it doesn't show up under devices.

    Hi,
    Have you managed to solve this problem? if yes, please highlight how you solved it...i'm facing same problem with my new Iphone 5S but udner Windows, thanks.

  • Trying to set up a new macbook air and it is asking for a keychain password

    I am trying to set up a new Macbook Air and it is asking for a keychain password.  Where do I find one?

    There was an option to Cancel the pop up box which I have now done and it has carried on with the set up - so not sure what it was all about.
    I am going to the Genius Bar tomorrow so will ask the question!
    Thanks for your help Linc.

  • I'm setting up my new ipad air and it's asking for id and password, but not accepting it. help me

    i'm setting up my new ipad air and it's asking for id and password, but not accepting it. help me

    If it is asking for an APlle ID password for an ID you do not recognize then you have stumbled upon the Activation Lock feature of IOS7.
    Read more about it here:
    http://support.apple.com/kb/HT5818

  • HT4865 When someone trys to get into my iCloud on à different device, either then on my trusted devices, do i recieve then an email? i have à iMac iPad and iPhone  and i live in Holland, is this possible or only for the future?

    When someone trys to get into my iCloud on à different device, either then on my trusted devices, do i recieve then an email? i have à iMac iPad and iPhone  and i live in Holland, is this possible or only for the future?

    I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow.  I try bridge mode but the internet doesn't work.
    You building supplied internet is a cheap service that is without proper routable addresses..
    Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
    Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
    Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
    You can put a password on the wireless.. go to the airport utility and put in a password.
    Other than that I don't understand what password you expect.
    Can I get an explanation of what bridge mode is?
    No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
    Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
    Double NAT, and set your own wireless names. There is no alternative.. sorry.

  • HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

    I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Maybe you are looking for