HT204347 Hi my serial number on bottom of my mac is W8*******66E when l try to try the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not

Hi my serial number on bottom of my mac is W8******66E when l try to turn the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not worked?
<Edited by Host>

What other solutions have you tried?
This may help you:
https://discussions.apple.com/docs/DOC-3353
Ciao.

Similar Messages

  • Need Help For iMac G5 Stuck On Grey Screen Or Apple Logo No Spinning Gear!

    Hello everyone i'm new here and i'm new for using iMac for some reason i was trying to clean or to fresh installation the iMac that my brother gave it to me that he bought it into the flea market without the original disk on it! when i erase the Macintosh  HD and some of the partition o iMac then reboot it now the iMac stuck on grey screen or apple logo no spinning wheel shown. and i also try to search and try all the tips of all mac user's like all the command key's and follow the instruction of them but still nothing happen..
    Holding CMD & R just to go disk utilities nothing shown up only apple logo and the noisy fan.
    Holding alt and it go to blue screen and show my mouse Pointer Refresh Logo, Hard drive Icon, Arrow Sign.
    i can click Arrow Sign and it go Apple Logo and within 2-3 seconds and it change to Power Sign Logo,
    i can click Refresh Logo but nothing happen .
    i can't click the Hard Drive icon.
    CMD, Option, P & R to Reset i also try and it's the same nothing change.
    CMD, Option, ESC no action shown.
    Is there anyway to fix this issue or problem please and thank you for help.
    Hoping to get result for all of you guys P.S
    iMac G5
    v10.5.8
    Leopard

    You need to have the install DVD that was issued with the iMac
    You can call Apple at 1-800-275-2273

  • Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

    Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
    Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
    Thanks for your assistance.

    If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
    1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • I have snow leopard installed as an OS.  When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol.  What can I do?

    I have snow leopard installed as an OS.  When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol.  What can I do?

    Maybe this might help.
    http://support.apple.com/kb/TS2570

  • Start up screen stuck on grey screen with apple logo and spinning gear

    Start up screen is stuck on grey screen with apple logo and spinning gear. What should I do?

    See this thread with dominic23’s suggestions:  https://discussions.apple.com/thread/5783326?tstart=0

  • Computer won't start, grey screen with Apple logo only.  Ideas?

    Last night my wife's G5 froze.  It is a G5 2.0 running OS X 10.4.11.  I shut it down (had to use the power button) and tried to restart.  No luck, just made it to the grey screen with Apple logo and spinning wheel.  After a few seconds the Apple logo disappeared and a black box took its place, then the wheel stopped spinning.  It was late, decided top wait until morning before trying again.
    This morning I tried to start up again.  This time got a warning(?) in upper left that a Firmtek item had already started.  I'm sorry I didn't write this all down at the time, so I don't remember the entire message.  Since there is a Firmtek card installed in one of the PCI slots I thought that might be the problem, and I pulled the card, as well as another Adaptec card that was also installed.  Tried to start again, got to grey screen with Apple but this time no spinning wheel.
    Opened media slot manually and inserted Diskwarrior.  Tried to start with Diskwarrior but again only reached grey screen.  Let run for ~5 minutes, until fans started to run and were begining to get noisy.
    Next I reset the PRAM.  No luck, still stuck on grey screen.  Tried Diskwarrior again, this time got another message in upper left.  Here is most of it -
    System Failure : cpu=1; code=60000009 (Invalid pmap)
    Lateset crash info for cpu1;
    Exception state (sv=0x609bb280)
    PC=0x000a4ad0; MSR=0x02003000  followed by more similar strings, then
    backtrace terminated - unaligned frame address; 0xfc088891
    So what's the diagnosis?  I've had various issues with my G5s in the past, but have never had one refuse to boot with Diskwarrior before.
    Thanks in advance for any help! 

    Whew, could be many things, from RAM, (or RAM slots/solder issue), to CPU #1 being bad, (CPU#1 is actually the second one.
    Does it boot into any of these modes?
    Target mode...
    http://support.apple.com/kb/HT1661
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    We might get clues with verbose mode...
    http://support.apple.com/kb/HT1492

  • My macbook pro 2011 shows grey screen with apple logo and want start

    i was just using my macbook pro and it freezed for a while not responding and i turned it off by pressing the power button. afterwards, i turn it on and it shows a grey screen with apple logo but want start pls somebody help me because am having "my life" on the machine

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • Hi my iMAc 27 inch starts up to the grey screen with apple logo and loading bar underneath it loads halfway then freezes up and shut down after a while please help

    Hi my iMAc 27 inch starts up to the grey screen with apple logo and loading bar underneath it loads halfway then freezes up and shut down after a while please help

    Try the tips listed here Mac OS X: Gray screen appears during startup - Apple Support

  • MBP OS X Mavericks stuck on grey screen with Apple logo & spinning wheel

    My Macbook Pro has been dead for slightly more than 6 months now (I don't use it as regularly as my school laptop). A few days before its death earlier this year, I upgraded the OS from Mountain Lion to OS X Mavericks (not sure exactly which version). A few days after that, connected to terrible internet, the Dropbox app tried to sync a load of files and then all of sudden, my Macbook Pro shut down. Now every time I turn it on, all I see is the infamous grey screen with the Apple logo and the spinning wheel. I tried fixing it multiple times, following instructions on other discussions, but to no avail. I'm also hesitant on taking it to the Apple store because I have some important files (read: holiday photos) on it which haven't been backed up yet and I don't want to lose them. Hope somebody can provide me with easy-to-follow instructions on how to revive it! Thank you.

    If you have not tried this, try this.
    Go step by step and test.
    http://support.apple.com/kb/ts2570
    http://support.apple.com/kb/PH14062
    Startup in Safe Mode
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Repair Disk.
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
    Reset PRAM
    http://support.apple.com/kb/ph14222
    Reinstall OS X  Mavericks
    http://support.apple.com/kb/PH13871

  • IMac (early 2008): grey screen with Apple logo and spinning wheel

    Hi there,
    I have recently had a problem with my iMac - it started with distorted graphics and I booted into Safe Boot to back up all files with the intention of reinstalling OS X (either from original install CDs or from USB drive with Mountain Lion on).  Safe Boot got rid of the distorted graphics but as I rebooted to reinstall, the iMac hung on the spinning wheel on a grey screen with the Apple logo.
    I have tried (in no particular order) : resetting PRAM and SMC, booting from original install CDs, booting from the self-created Mountain Lion USB stick, booting into Safe Boot again, booting normally, taking out keyboard/mouse and booting normally... the pinwheel either freezes, the iMac reboots itself, or comes up with a screen telling me to reboot due to a problem.  If I hold down command-V at startup it always freezes/fails at the same point and there's usually a previous shutdown cause of 3 or -128?!
    I don't seem to be able to run the hardware test either from DVD or internet, I can boot into single user mode and the iMac will stay up for hours but I don't know what to look at or what to fix!  There are kernel panic logs relating to some of the shutdowns but as I can't view these out of single-user mode I can't attach them to the post but can look & reply on another machine.
    It's an early 2008 iMac, 24" screen, running OS X 10.8.2 - I'd appreciate any help and will try to provide any extra information anyone needs (that I can glean from single user mode, anyway!)
    Kind regards,
    Carly

    I've looked at that, I did try to link the discussion to the article but it failed too   Thank you though.
    I just created an Ubuntu DVD to run - the graphics are distorted on that too so I'm guessing it's a fault with the graphics card.  I don't have the knowledge to confirm/deny it so a trip to an Apple Store is probably in order?

  • Macbook won't boot past grey screen with Apple logo and spinning wheel.

    For some reason, after about 1 year and 10 months of owning my Macbook, it decided this morning not to load past the grey screen with the Apple logo and spinning cog/wheel.
    I used it for a couple of hours beforehand, and it was working fine. Software Update prompted me of about about 4 or 5 updates; I can't remember exactly what was downloaded, but I think there was a Security Update and iTunes among them. I restarted, left it to install with no errors, but when I logged in, Safari and iTunes were running incredibly slowly. I also noticed that the volume keys weren't responding, as well as the power key to bring up the "Sleep, Restart, Shutdown, etc" dialog box. I forced shutdown, hoping a restart would solve my problem, and that's when my troubles started. I originally just left it, but after about an hour the wretched thing was still spinning.
    So far, I have done a number of troubleshooting tips on a variety of websites. I have tried taking the battery out and holding down power for 5 seconds, resetting the PRAM with option, cmd, p & r, and holding down power until the sleep light flashes rapidly and the computer lets out a large "BOOOP".
    I have booted off my Leopard install disk with both option and c, repaired the hard drive a number of times, with there being no errors whatsoever. I have tried repairing permissions, but everything seems to freeze up, except the mouse.
    For some reason my computer will not boot into safe mode, either, and holding cmd & s at startup doesn't get me to the stage where I can enter commands with the keyboard.
    Unfortunately, because of my puny 60GB hard drive, I only have 1GB of free space left and cannot reinstall Leopard without wiping my hard drive.
    I would greatly appreciate it if anyone could assist me with this unfortunate dilemma. It's such a shame that my computer has been fantastic for so long and now decides to play up. (Maybe it's just Apple trying to get me to buy a new 2.4Ghz aluminium Macbook sooner than I was planning...)
    Thanks very much.

    Hi ds,
    Sorry to hear you're having such trouble!
    Unfortunately, the best thing you can do at this point is reinstall Leopard (and then attempt to install the combo updater, too). If you don't have a backup of your machine, you could boot it into Target Disk Mode (by holding down T at startup) and then attach it via FireWire to another computer to salvage your files.
    I recently had to repair a machine with this exact same problem, and after messing around with that for several hours, I'd have to say that I think that an Erase and Install is the way to go. If you then migrate over your user data and start having troubles, you at least know where the problem lies. I suspect, though, that having a clean machine with all of the new updates applied will be the end of the issue.
    Sorry to be the bearer of bad news. There are a few other things you could try first; you could, for example, manually download the relevant combo updater from Apple's website and attempt to install it to your damaged machine while it's in Target Disk Mode. If you have a copy of Disk Warrior, that too is certainly worth a shot (and in some cases may be the saving grace). In my experience, though, a failure of this magnitude isn't easy to resolve.
    Hope that helps.
    —Hazy

  • Mac book air stuck on grey screen with apple logo and spinning wheel

    I had a lot of tabs open and several applications as well. things really slowed up when I added El media player to the mix. finally computer froze completely and now can't get it to restart (stuck on grey screen) tried SMR plus PRAM procedures without success.

    Hmm... try doing this:
    1) Force your Mac to shut down by pressing and holding the power button for about 5 sec.
    2) Start in Safe Mode. Press the power button to turn it on, and before you hear the Startup "Dummmmm" chime, hold down the Shift key. For a few sec, you won't see the Apple logo. Keep pressing the Shift key until you see it. If you press it after the Apple logo appears, start from Step 1 again.
    3) This time, your Mac should take longer to boot. (Like a minute or 2 longer as it is going thru the necessary files to boot from, and not just everything like in Normal Startup mode; which caused it to hang)
    4) Does your Mac boot sucessfully to the Login Screen or Desktop? The login Screen should show SAFE MODE in red at the top. The Desktop should have Sound disabled and seems a lot slower. If you see either of these, backup ALL your files (if you have not already done so) on to an External HDD. Create a new User Account in System Preferences>Accounts with about the same info as your current account (The name will have to be different though, if your previous account was John, this time, add your last name as in John Appleseed.) Make sure it is an Admin account. Then, login into the new account and delete your previous account. Copy all your files over to your new account and restart your Mac correctly by going to Apple Menu>Restart.
    5) This time, don't press anything and let it boot normally. Does your Mac boot correctly? I hope that helps you a little. Get back to me if it does not work!

  • MacBook Pro failing to start up after fairly recent 10.8.4 update. Just grey screen with Apple logo displayed and then hangs.

    After having to do a forced shut down (holding down power button) due to freezing I cannot again progress past the grey screen with the apple logo. The spinning cog comes on at first then disappears leaving just the apple logo (in case that is sognificant).
    I have tried to find a solution through the support pages but have unfortunately been unsuccessful in my endeavours so do apologise I have overlooked the obvious and would really appreciate some help. I've just started the second year of my Uni and the timing couldn't be worse.
    I have tried the following:
    1) held down option and started in "recovery 10.8.4" from which I used disk utility to "repair disk", which at first needed some repairs and then I ran it again for the second time to confirm it had a clean bill of health.
    2) I then ran "repair disk permissions" and repeated a second time to confirm it was all working well (however one error remained "warning: SUID file "system/library/CoreS... has been modified and will not be repaired" but have read that this should not be a big problem) After which I tried to start up again and it hung with the apple logo on the grey screen.
    3) tried resetting the PRAM by holding down cmd+option+P+R before powering up, but it only chimes once and then restarts the mac, then chimes once and repeats the process again in and endless cycle.
    4) I then tried 1 and 2 again and then tried to reinstall OSX 10.8.4 from the recovery mode, but this came up with the message "could not find installation information for this machine".
    5) I tried starting up in safe mode by holding down shift after the chime at startup but safe mode did not start after leaving it 3 hours.
    6) I tried starting in verbose mode with cmd+V but after running the script it reverts back to the grey screen.
    I hope I have explained it in enough detail and appreciate any direction or thoughts as to it being salvageable and what to try next.
    Many thanks

    Eric
    Thank you for taking the time to post those links to informative articles.
    In relation to the first article entitled "Resolve startup issues and perform disk maintenance with Disk Utility and fsck"
    I can confirm that i was not able to start in safe mode but was able to boot up in recovery mode and run disk utility. The only one i hadn't tried is fsck.  Please correct me if I am wrong, but if from what I understand by the article, this is to be used if I could not run disk utility, with which I have been able to do and to repair both the disk and permissions. But again, if I've missed the obvious from that article please correct me.
    Te second article entitled "Troubleshooting Startup and Login Items" identifies troubleshooting that should be carried out in safe mode. However I am unfortunately unable to start in safe mode and have not been able to progress past the apple logo since this problem started.
    Thank you for both links and for taking the time to share. If though I have missed something more significant in this regard I would appreciate your feedback.
    Many thanks 

  • Powerbook won;t go past grey screen with apple logo on start up

    Hi
    I am getting very stressed, my powerbook g4 won;t go past the grey screen with the apple logo when switched on. I need to sort it ideally without another computer to go through but if that is necessary then I will do it. I have tried the RAM reboot but nothing, there is not even the spinning loading symbol just a grey screen - which it will stay on until I turn it off. Someone please help!!!!!!!!!!!!! Not sure of my OS as I can't turn my comp on, but I am running leopard on it

    Welcome!
    First, see if you can boot in Safe Mode, holding the Shift key during startup until you see a message about safe mode. Getting a desktop can take longer because Safe Mode forced some disk checking.s
    ...I am running leopard on it
    Then you should have the install disks. They can be used to boot the computer for repair. Insert the DVD and press and hold the "c" key during startup. That will launch the installer BUT you don't want to reinstall yet. Find the install's Utilities menu and launch Disk Utility. From there you can check the hard drive and make some repairs.
    I need to sort it ideally without another computer to go through but if that is necessary then I will do it
    That would require that your compute work enough to start in FireWire Target Disk Mode. FWTDM lets your hard drive show up on another Mac as if it were an external drive. You can test by starting the computer and holding the "t" key until you get a blue screen with a big yellow FireWire symbol. Looks like this:
    !http://t3.gstatic.com/images?q=tbn:ANd9GcT8uGcDJDrUrECaelR5ash9yA3zuGBakhxrJ9TjfjO_uoCmKQ&t=1&usg=_5RiQv2QkO7UuPLUpiige1MVxdb0=!
    I believe FWTDM's code is in firmware and not on the hard drive , so may let yo uaccess the disk form another computer.

  • Stuck on grey screen with apple logo when starting up?

    Hi,
    My Macbook (2009 aluminium unibody (Leopard 10.5.8)) won't boot. When I try to start it up it gives the chime and then gets stuck at the grey screen with the Apple logo and some spinning gear below. I have tried booting with the install DVD and repairing through Disk Utility but this doesn't work. Disk Utility can see the hard drive but none of the partitions on it! This makes me think the hard drive has died.
    However, I can still boot to Windows through BootCamp. From Windows 7 I can still see and access files from the Mac partition. So maybe the hard drive is ok and something else needs fixing... SATA cable???
    Other info:
    The night before this happened my computer froze when trying to shut down from Windows and I had to force shut down.
    The current internal hard drive is only about 4 months old (a bit short for it to be dying already - its a Western Digital 750gb 7200rpm). I replaced the old one as it had stopped working (at least i thought it was the hard drive ). The hard drive I replaced had lasted about 2 years (Seagate 500gb 7200rpm). Maybe the 7200rpm gets too hot?
    Any help much appreciated as I really don't want to be reinstalling again.
    Thanks

    Boot from the OS dvd and start the install process, but stop immediately after the language selection. (You are not reinstalling.) At this point you will see a Utilities menu. Open Disk Utility, select your start up disk, and click on Repair Disk. When that is done, quit DU and restart.
    See if that procedure will let you boot as usual.

Maybe you are looking for