HT204370 What do I do if the audio is off from the picture, during the movie that I downloaded from Itunes?
What do I do if the audio is off from the picture, during the movie that I downloaded from Itune
Depending upon what country that you are in (films can't be re-downloaded in all countries) then try deleting the film from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download films or if it re-downloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Similar Messages
-
Hi! I want to see a movie that I downloaded from itunes in a language which is not listed in the options. How can I make it?
dalqgi wrote:
Hi! I want to see a movie that I downloaded from itunes in a language which is not listed in the options. How can I make it?
Check the available languages available for the Movie BEFORE purchase and not after.
Cheers
Pete -
Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
what do i do when a audio book i purchased is not in purchased menu for re downloading for my account, or why cant i re download the book from iTunes store with out paying for it after support they told me i could.
i tried to re download a purchased audio book after i contacted apple support team for iTunes they said it would be ready for re download or they said id have to re download it from iTunes store i cant remember, so i tried both couldn't re download it from purchased menu and the book id have to re download from iTunes store costs money as if i have never purchased what do i do? I don't have any warranty any more or money to purchase another warranty.Babowa
Thank you for your prompt reply. I have bought 1 MacbookPor 17, 1 Macbook air, 1 MacbookPro 15 , 2 ipads, 3 iphones, and this iMac27 and 2 of iMAC24 or 20 not sure but I do not recall ever doing what you are telling me in your reply. When you get a extended car warranty, you don't sign up for it.. it is just there and is included in the sale. You don't buy this warranty to use it.. You buy it, in case something happens. Here a perfect iMAC with minimum 100 hour useage has a dead drive. That is not normal and I should not have to even be requesting anything since most MFG offer a 3-5 year warranty on their disc drives and I believe that is probably passed on to Apple regardless if an extended warranty is purchased or not. Customer service dictates a more flexible approach to make sure the lifetime value of a customer is not lost due to some misunderstanding.
I was in the MacStore that I purchased the unit..and they found and pulled the invoice and confirmed
the purchase of it in front of me. I had paid with credit card and fortunately it was there in their system. I do not also recall recieving any box or paper although most everything I ever get remains sealed.. I am not in the habit of opening anything since I have never encountered any serious issues before.
I have used my Macbookpro warranty 1 time and that is all throughout the years I have been investing in Apple equipment.
I just recieved a letter from the store asking me to get the paper to them so they can register it... I don't recall getting any paper actually. But I do have several boxes sealed here.. On this iMAC27, it was a hurry up and get it done thing and I don't remember taking anything extra with it. Regardless, my request does not seem unreasonable.
Thank you -
How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.
It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?
-
The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port. -
I am importing a video and in iMovie the video is now white. the audio still plays and I can play the video properly outside of iMovie so any help is good?
I going to recommend again, downloading and installing some video helper applications.
1. http://perian.org/ (this will add a number of different file types to the ones QuickTime already plays)
2. http://www.divx.com/en/software/mac (will add more file types to what QuickTime can play)
Either one of these might be necessary to get MPEG Streamclip to export the video. Failing that the only other thing I have found is an obscurve discussion thread on Avid.com:
http://duc.avid.com/archive/index.php/t-277791.html
I've figured out what the problem is on my end. The video came from Avid on a Windows machine and was encoded with Squeeze. I found out that the 2 seconds of black at the top of the video were at a different frame rate than the rest of the video. I chopped off the 2 seconds of black and started at the first frame of video, exported it with Quicktime Pro and was able successfully view the video in ProTools. Apparently Squeeze will let you create a movie file that has different frame rates within the same movie... This fixed my issue that was exactly as you describe, hopefully it might work for you.
Lastly, you could try converting the video clip using HandBrake -
When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...
I too have the same problem. The audio drop out of sync in about 5 sec in not uncommon for the audio to be 30+ sec behind video. Apple needs to fix this!!!!!!!!!!!!!!!! its a joke, my iphone is all messed up after the last update as well. at one time not to long ago apple products and software were top rated, not so much any more, more and more problems are showing up and apple is unwilling or unalbe to fix the many issues. Apple needs to fix the audio sync problem, it not the computer hardware or other software it ITUNES!!!!, there is no workaround other then hitting pause and hitting pause and hitting pause to temp fix the problem.
-
Ever since the new update in iMovie all my audio seems to be there ,but when I get in the middle of the video the audio is off. Help?
I think the problem is that the iPod got set to Manually manage music and videos. It needs to be set up for automatic syncing again. Just unchecking that Manually manage music and videos setting does not do it.
In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen. In the sidebar (along left side of screen), there are two headings (Settings and On My Device). Under Settings, click on Music. To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box at the top for Sync Music. That turns ON automatic syncing for music. Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod). Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below. Then click Apply. -
When burning iso with disk utility, the audio is off!
I have an ISO file that works fine when I mount it or watch it on VLC. If I burn it using windows (in parallels) it is fine...
But when I burn it with disk utility, the audio is off by a second or so. I can't figure this out since it is a disk image. there shouldn't be a way to dissociate the audio. I did have a previous version of the iso file that was off.. Is it possible that I am trying to burn an iso file and it is burning a mounted version from before (even though I am choosing this from the finder?)
Any thoughts or suggestions?
I though macs just work. Seems a bit more complicated.I don't recall for sure about "disk utility" and DVD and/or Bluray. It seems to me that Toast is usually used.
-
I cant seem to restore my iPhone it. I try to reboot it and it goes to a connect to iTunes screen. I connect the phone to the computer and when I click restore in iTunes, the phone turns off in he middle of the file extraction. What do I do now?
Restore as a NEW device. Don't use backup at all. Your backup may have corrupt data causing the issue.
-
hi guys !! i'm an ipod touch 5g user ! and i want to switch to ipad !! but i'm worried about the audio quality which matters to me the most !! is the audio quality on iPod with ear-pods the same as iPad with earpods ?
thnx i'm more satisfied now !
-
What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."
It means that iDVD has found a problem with one of the movies added to the project. Did you edit the movie after it had been added to the project.
Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
iTunes tells me that my computer is not authorized to play the movie that I downloaded a few years ago, on an older computer. What do I have to do to play it?
In iTunes from the Store menu select Authorize This Computer.
Read here > http://support.apple.com/kb/HT1420
Not for iTunes 11: Press Alt to show the Menu Bar
Hope that helps -
How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them. They have a ton of books but I can only listen to them from my windows media player and I wouldlove to download to my I pod but I have tried everything I can think of it they won't go over. Someone said all I had to do was copy them over and they would convert but I can't even get them to copy. Thanks.
Well it started happening AGAIN with my 2nd IPod. No matter what I did, it Itunes would NOT restore it!
I finally installed Itunes on my hubby's PC at work and managed to get it restored there.
Apparently, there must be some sort of compatibility issue with the windows version of Itunes and some other piece of software on my pc.
And one more important thing! I had to follow the instructions in the other thread that talks about how to correctly uninstall itunes and quicktime, in order to completely eliminate ALL traces of my "first" ipod's existence so it wouldn't demand that I restore it.
I think the software got "confused" and thought when I connected my 2nd ipod, that it was the 1st and that it still needed to be restored.
Basically, this is just POORLY written and POORLY tested software!
Maybe you are looking for
-
Re : Issue with the column display in Bex reports
Hello Gurus, I have an issue with the reports in Bex, this is a bit confusing scenario I would try to explain in more details. A query was already built for monthly Report in Sales and Billing for which the variable were Calender month/year range 1
-
Problem while doing the Cheque print through f-58
Dear Team, I am encountering an issue while doing the Transaction through F-58 System is generating the cheeque print with coma instead of decimals i.e instead of 1,00,000.00 its comming as 1.000.000,00. Please advice how to correct this. Thanks for
-
UTL_SMTP Problem: Sporadic Blank Subjects in Email
I am wondering if anyone else has run into this problem with their implementation of UTL_SMTP. We currently deployed code changes to switch from hosting out to send email, to using the UTL_SMTP email functionality from within the database. We are now
-
I have got in iphone4 ios7 and its shows the activation screen then how will i contact him?
what would i do
-
How to change the fiscal year in the controlling area?
I want to change the fiscal year mentioned in the controlling area. The problem is that the controlling area is assigned to a company code and number ranges have been defined and cost center hierarchy has been created. Please suggest me what to do? T