HT204387 how can i make ipad discover my bluetooth GPS again?witched it on the iPad discovered it but I didn't havre the pairing code to hand.

Can I reset iPad bluetooth? It recognised my bluetooth GPS when I first switched on but I didnt have the pairing code to hand and the pairing opportunity timed out. It seems to have decided to ignore the GPS bluetooth now.

The only option is to wipe the device clean and restore it to factory settings.  Hope you have a backup.
Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

Similar Messages

  • How can I make a shortcut for bluetooth in my iPhone 4 ?

    Hello everyone
    How can I make a shortcut for bluetooth in my iPhone 4 ?

    sorry not that I know of, out of the box that is, would be heady to quickly change between headset and normal mode though
    let apple know you want this feature
    http://www.apple.com/feedback/iphone.html
    there are 3th party solutions though
    http://www.macrumors.com/2012/04/17/new-app-turns-bluetooth-on-and-off-with-one- touch/

  • Since updating to ios7 i can no longer partially download emails and this is using up all my data plan. How can I make Mail only be partially downloaded again?

    Since updating to ios7 i can no longer partially download emails and this is using up all my data plan. How can I make Mail only be partially downloaded again?

    YEA!  My jurryrig worked!  To all with this problem:
    You CAN have podcasts in a regular playlist IF you convert them to a standard MP3 first.  So, yes, a lot of manual labor
    The good news: if, like me, it is a track that you listen to frequently (in my case meditations for sleep and relaxation) then the time is worth it.  I will mess with automator later to see if there is anyway to script this!  Then, less work for me and more for my mac.
    Here are the steps:
    Select the file from your Podcast folder.
    Change all data you need -- "artist," "album" etc...
    Make a copy of the cover art for this file by dragging it to the desktop.
    Select the Advanced -> Convert ID3 Tags menu item.
    Check ID3 tag version, and select "v1.0" from the drop-down menu.
    Drag the file to the desktop (this will make a copy of the MP3 on the desktop)
    Delete the file from the iTunes list.
    Drag the copy of the file you have on the Desktop back into iTunes.
    Search for the file in the Library, and add the cover art again to the file.
    Now the file is out of the Podcasts folder and works like a regular MP3 file inside iTunes. You can re-add it back to playlists!

  • How can I make my print job go fast again?

    How can I make my print job go fast again? Since february when there was a update for snow leopard, all of my print jobs almost take forever to finish.. a pdf file 10MB size will take about 1 hour to send to the printer that is a Nashuatech mp c3500.
    And yes, if the pdf for example is 20MB size, it will take about 2 hours to get it done..
    My equipment is:
    Macbook pro OS X 10.6.8
    Nashuatech NRG MPC3500

    Sometimes, Software Update doesn't apply updates entirely correctly, and odd issues can happen.
    You might download and install the latest combo update for 10.6.8, which is at http://support.apple.com/kb/DL1399 . Before installing, bring up Disk Utlity (on your hard drive in applications/utilties) and repair permissions. Install the update, then repair permissions again when done.

  • TS1702 Vtok application problems since I update my iPad 2 system to ios6, my vtok cannot open. What I need to do in order to fix this problem? I already removed and re installed the application many times, but this didn't fix the problem.

    It is any problem with the application vtok? Since I update my iPad2 system to iOS6.0 I was unable to use this application. The problem is when I tap on the vtok icon, the application opens and closes right away. I removed and reinstall the application twice, but this doesn't fix the problem. When I try to find the application on application store, it's give me a message that the vtok application is not available in USA.

    Not available in Spain either. I can't find anything googling for this problem, Vtok's page and facebook page seem to be unmaintained.
    It is strange such a widely used app doesn't show life signals.
    Good luck

  • How can I make my website a nornal size again (it is narrow and small)?

    Hi Thank you for helping me.
    My website on Firefox changed from normal size to being small and narrow - you can barley read the copy.
    The same website is normal size on Safari. It has been stuck like this for over a year. Do you know how to make it a normal size again?
    www.celebratespirit.com
    Thank you
    Penelope

    hello Penelope, try to press command+0 ('zero') while you're on the page in order to reset the zoom level or in case this doesn't work also go through the other common troubleshooting steps at [[Websites look wrong or appear differently than they should]].

  • How can i make my normaly hidden files hidden again?

    I own a 2013, 27" iMac,  w/ i7 processor etc.etc. Love it, I enjoy poking and prodding about to no end. I try and buy loads of interesting apps at the App Store, in general find out what makes my OS X tick. Sometimes during my excursions I trip some wrong switches. Nothing ventured, nothing gained, it's how I've learned
    many interesting techniques. However, I made a decision to change the look of my desktop and whatever I did, wound up with all my hidden OS files displayed
    in any open window. I haven't been able to correct this problem yet and thus, getting a little frustrated. It happened once before but I can't remember just how I  corrected this. I know there are a very few of you that have experienced this same problem once....or twice (in my case). If you could please nudge me in the right direction, you would spare me a lot of sleeplessness as well as embarrassment. Thank you in advance!!

    If you've used the usual approach to enable this display, then launch Terminal.app from the Applications > Utilities folder and issue the following two commands:
    defaults write com.apple.finder AppleShowAllFiles FALSE
    killall Finder
    Here is a slightly fancier solution.
    Have current backups of your data, if you're experimenting.  There are some commands and some (easy) command mistakes that are not recoverable, short of rolling in backups.

  • How can I make MS Word create PDF's again? After cancelling Adobe cloud, Word can no longer make PDF's. Worked before I used Adobe Cloud.

    Hi. I can no longer create PDF's in MS Office. Before I installed and ran Adobe Cloud, this worked. Now, after cancelling Adobe Cloud, Adobe has also shut down the PDF feature that worked without problem before. Adobe now wants me to subscribe to make Acrobat work. No way. Worked before so it should not have been withdrawn. Can someone tell me what I now need to do to re-enable the PDF feature in MS Office? Never had a problem with it before. If this happens every time that I subscribe and unsubscribe, then Adobe need to pull their finger out and stop tampering with other programs.

    Depending on which version of MS Office you have the Microsoft Save As PDF option is either an add-on or a feature.
    If you are using MS Office 2007, then  it's the Add-on and you need to either run repair for it from the Add/Remove Control Panel or reinstall the add-on.
    http://www.microsoft.com/en-us/download/details.aspx?id=7
    If this is a later version of MS Office (2010 or 2013) then the feature should be available and you should run repair from the Add/Remove control panel.

  • How can you make it so that when a person from a company calls me it shows their name and company on the screen

    I use my iPhone for work as well as personal. However for work, I have noticed that when someone rings me, for instance Bob Mansfield from Com tec, the phone screen states just 'Bob' and no other details. I have the best part of 6 Bob's in my contacts all with different surnames and company's. Is there a way that I can get my phone to show more info on the person calling. For instance, surname and company if applicable? Any help would be much appreciated.

    See deggie's response in this post... https://discussions.apple.com/message/8531821#8531821

  • How can I make my HP printer work wirelessly AGAIN!!!?

    First of all it worked wirelessly, then it did'nt.  I don't know how to fix it.  Help!

    You don't say what printer or give any information. My car doesn't work doesn't help anyone help you. BTW, have you contacted HP support?

  • HT3704 How can I make an image in front of a different one. I looked in Inspector, but I could not select a bullet in the section of wrap. Can you help me fix this? thx. This is in pages 09' on the macbook pro

    I would please like to know

    Sounds to me like the image is Inline ie part of the text.
    click on it > Inspector > Wrap > Floating
    Peter

  • How can I make my BCC recipients show up in MY sent emails?

    When I send an email to BCC recipients, how can I make those BCC recipients show up in MY sent emails...so I'll remember who I sent the email to?

    Welcome to the discussions, MacPat292.
    View/Message/Long Headers or if you are going to do it regularly View/Customize Toolbar and add the button for it to your toolbar.
    AK

  • Mountain Lion Recovery DVD - How can I make one, ML was installed on my iMac and BBP

    Mountain Lion Recovery DVD - How can I make one, ML was installed on my iMac and MBP when I purchased them. When I look at the App Store, it dose not show ML as purchased (to download again) - do I have to purchase it again to make a Recovery DVD?
    Thanks for your help.
    Regards
    NGI

    do i have to purchase it again to make a Recovery DVD?
    No. You can still make a bootable recovery DVD, but you will not be able to make a full bootable copy of ML without purchase.
    1) Enable the debug menu for Disk Utility via Terminal Application. Navigate to terminal by typing "terminal" in   spotlight. Copy the bolded text below and enter it into the command prompt:
    defaults write com.apple.DiskUtility DUDebugMenuEnabled -bool true ; open -a "Disk Utility" ; exit
    2) From the Debug Menu > Select Show every Partition > Recovery HD should appear
    3) Right click (control + click) the Recovery HD partition and select "Mount"
    4) Right click again the partition again > "Reveal Recovery HD in Finder". Leave this window open
    5) At this point, you will need open terminal again and enter the following command:
    sudo chflags nohidden /Volumes/Recovery\ HD/com.apple.recovery.boot/BaseSystem.dmg ; exit
         Type your password when prompted.
    6) Navigate back to the Recovery HD finder Window > com.apple.recovery.boot > BaseSystem.dmg
    7) Drag "BaseSystem.dmg" into Disk Utility's sidebar.
    8) Insert your DVD
    9) Select "BaseSystem.dmg" in the sidebar and hit "Burn"
    Once the burn is completed, hold option down at startup and select the DVD to boot. This is a bootable Recovery partition, not a bootable copy of ML.
    Note: to disable the debug menu,
    defaults write com.apple.DiskUtility DUDebugMenuEnabled -bool false

  • How can i make mirror changes in playlists when homesharing two computers in itunes

    I have a couple of computers at home and want to be able to change in my i tunes playlists from one or the other of them and at the same time get it mirored on the others. How can I make this happen?

    Thank you very much for your answer
    As I see now, our 'guid' tags contain the episode URLs
    To avoid this problem in the future i would like to change guid tags. Can you please tell me how a guid tag should look like if it is not the URL?
    Thank you for helping us!
    ps now it looks like this eg:
    <guid isPermaLink="false">http://www.castyourart.com/podcasts/213_thinkglobal_en.mp4</guid>

  • After 15 mins  with no activity my airport express turns off how can I make it permanent

    After about 15 mins with no activity my airport express turns off. How can I make it stay on permanently ?

    Not sure what you mean by "turns off".  Are you saying that the light on the Express goes out after 15 minutes?
    Assuming that it is functioning correctly, the AirPort Express is "always on". It has no type of "sleep" setting.
    If the power light on the Express remains on, you have some other device on the network that is going into a standby mode or sleep mode. Check the Preference settings on other devices on the network.

Maybe you are looking for