HT2101 my i phne was exposed to a little water and then i put it under a table lamp to ensure ebvaporation of water . During this the phone was switched off. Later when i turned the phone n , it worked pine for 5 min and then the temp alarm came. Need hel
Hi my iphone showed signs of moisture in camera area and so i kept it under a table lamp for a few hrs after switching off the phone. Later the moisture was gone so i switched on the phone and after 5 min of perfect operation an High temp alarm came. Every time i switch off the phone works fro 5 min and ten gets the alarm. How can i get my phone back to normal?
Thanks for the reply, just being positive as the phone turns on fine and every thing works ok for 5 min and then the temperature alarm comes on. I am hoping that the issue may be limited to a perticular temperature sensor etc.
I have got the phone opened and there was little water signs that have been cleaned with alcohol but the issue remains the same. I believe that the temp alarm is caused due to the phone being kept under the table lamp which raised the phones temp beyond the acceptable range and hence may be damaged one of the temp sensors. Heard that there are around 5 different temp sensors in the iphone. If any one has more knowledge please advise on how i can get this fixed.Thanks.
Similar Messages
-
My phone randomly shut off. When I turned it back on it said it needed to restore, to plug it into itunes. When I did, and tried to restore it, it failed with a code 21. I have followed all the instructions, it still isn't working. I've uninstalled and reinstalled all that the steps told me to, I've updated everything in my computer. I don't know what else to do. My phone will just show the apple sign and the itunes plug in sign.
Hey Carolefromthelou,
The following link will provide steps on how to best remove all traces of iTunes from your PC and then reinstall it:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Welcome to Apple Support Communities!
Best,
Delgadoh -
Last night my iphone screen all of a sudden was solid blue and now it is black. I tried turning it on and off. Still nothing appeared on the screen. I put it on the charger and this morning it is totally black. However, when I hit the on and off button, I did hear the text message signal go off. When I turned the volume on and off a big white bell flashed. In the last week, there were some other display problems such as the screen blowing up large. The only way to fix it was to turn off the phone and then turn it back on.
What does all of this mean? It seems like I've had these problems since the iphone 4 upgrade.just do reset, press home button and power butoon for a while untill you can see apple
gud luck -
I was updating my ipad2 to iOS.5 version, and somehow the iPad turned of and the update was not finished. When i turned on the iPad the computer nor iTunes could recognize the iPad. I have windows xp. How can I solve this issue?
Try throwing it into recovery mode and starting over.
http://support.apple.com/kb/ht4097 -
i have an imac g4 purchased Dec 2003 runnung OS 10.5.8. It runs fine with airport off, but when I turn airport on it freezes with the black page, "restart by holding power key . . ." I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS). No change in operation.
I am running wifi from verizon. Recently changed from mifi2200 to jetpak 4620 in a 3G location. Ibook running fine, desktop freezes. If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked. How do I fine the culprit?the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
After all, the component or software could only be tested as far as the current OS version when the component or software was released.
Beyond that, we are all "beta testing".
Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
I wish they would include the latest pkgs at least with software update.
Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
Until then, I'll leave Software Update disabled....... -
My computer froze, so I had to finally turn it off. When I turned it on again, it wouldn't open iTunes. Error7 (Windows error 14001) appeared. I could not uninstall and reinstall iTunes because now Windows Installer isn't working either. Tried using "System Restore" from a backup, but still didn't fix problem. Tried online purchase of registry cleanup ("Error End"), but that didn't solve problem either.
How can I get iTunes to open? Any suggestions for getting Windows Installer to work? Thanks!Hey Carolefromthelou,
The following link will provide steps on how to best remove all traces of iTunes from your PC and then reinstall it:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Welcome to Apple Support Communities!
Best,
Delgadoh -
NEED URGENT HELP!
My computer was trying to connect to my Bluetooth mouse but I accidentally hit cancel so now my computer won't connect to my mouse. I turned my computer off. When I turned it back on it still won't connect and I can't login! Help!Reset the SMC.
Barry -
when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problemIf it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem. -
My iphone 4 was in airplane mode - when i turned it back on all my contacts had disappeared. How do i restore them?
See earlier post by tt2
https://discussions.apple.com/message/7217190#7217190 -
When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David
Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H. -
My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me
Wrong forum. This is the iPad forum.
-
My iPhone 4 won't switch off. When I press the power button at the top, the phone doesn't respond. Please help!
Try a reset
-
I am changing to iCloud on my iMac, MacBook Air and my iPhone. My iMac and MacBook both moved over to iCloud but my iPhone when I go to Settings and click on iCloud it shows my Mail setting turned Off. When I turn it on it wants me to create a new email address to turn on iCloud Mail. I already have to "me" accounts plus another email address and don't want to create another one. I don't understand why it's asking me to do this on my iPhone but didn't ask on my iMac or MacBook and is there a way around creating another @me.com email address?
Hello Timmy790
Try the suggestions in the article below to resolve the issue of seeing your old Apple ID on your iPhone.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G. -
I have a macbook 2009 later, when I turn on a fan continuously runs?
I have a macbook 2009 later, when I turned on the computer a fan runs continuously? This just started any suggestions? I waited a day & the same thing happened. Also no light on the maglite when attached to computer.
I would try an SMC reset...You can follow the directions here for how to do that: http://support.apple.com/kb/HT3964
-
BlackBerry z10 is switching off automatically when the battery is between 40 to 50%. And opens when I connect the charger.
First it gives a logo of a red sign. And the light. Then after few red light it opens. Pleaseee help.I had the same problem, it happened as soon as I got my phone so Telus replaced it under the 30 replacement policy. If past 30 days they repair it.
Have it repaired or replaced.
Maybe you are looking for
-
Is there a listing or book of oracle error codes?
i am looking for a book of oracle error codes. Is there someplae where I can find them online or anywhere really. thanks
-
My sons iPod touch is not recognized by iTunes, or windows. I have tried a variety of options, even resetting, but still no luck.
-
Add field in an internal table
Hi There, How to add a field in an internal table created at the runtime using CREATE DATA D1 TYPE TABLE OF (VAR). where say var contains name of a DDIC table. Rgds, deb.
-
Adding sounds to the sound alerts
Is it possible to add different sounds to the alert sounds in Snow Leopard. The only choice I am given is default sounds. I guess another question is what library / file are sounds stored in. What type of file are they file as etc. I would like to ch
-
hi, all long time listener first time caller, i need some help with a button, basically the button needs to load a flv through a video instance not a flv player, I know it sounds a bit cheeky to be asking someone to help but I have tried most avenues