HT2188 list of software versions for the different iphone models

where can i find a list of software versions for the different iphone models?

Wikipedia has a list of the original and current iOS for each device
http://en.wikipedia.org/wiki/List_of_iOS_devices

Similar Messages

  • What is the latest software version for the Nokia ...

    So this is really just a token post to keep my service provider happy (no idea why I have to do all the asking for them when we both already know the answer) but can I please have a confirmation of the latest software versoin for the Nokia 6700 Slide.
    On a side note it would be greatly appreciated if you could PLEASE send a copy of the latest version of the software to my carrier (Vodafone Australia) so that they can finally push out the latest version of the software.
    Thanks, swinsor

    v71.004 seems to be the last released update. If the phone is Network branded your device may / may not get this update. Anyway, the update was released long ago. 
    This being a User-to-User Forum, can't do anything else than providing the info. 

  • What is the latest software versions for the Samsung Fascinate?

    Seem to have trouble updating to the latest versions with InnoPathActiveCare.
    My exisitng updates are as follows:
    Hardware Version: i500.04
    Model Number: SCH-I500
    Firmware Version: 2.1-update1
    Baseband Version: S:i500.04  V.DI01
    Kernal Version: 2.6.29
    Build Number:  SCH-I500.DI01
    Is this the latest available????
    Thanks alot.

    butch14 wrote:
    Seem to have trouble updating to the latest versions with InnoPathActiveCare.
    My exisitng updates are as follows:
    Hardware Version: i500.04
    Model Number: SCH-I500
    Firmware Version: 2.1-update1
    Baseband Version: S:i500.04  V.DI01
    Kernal Version: 2.6.29
    Build Number:  SCH-I500.DI01
    Is this the latest available????
    Thanks alot.
      If there is no pressing reason to update the phone, I would wait. There are alot of people that are having problems with the phone when they did the upgrades. Missed calls/texts, dropped calls, freezing, etc.
      Gingerbread is rumored to be in the works for the Fascinate, hopefully soon...

  • Bootcamp Version 3.1 --List of bug reports for the Development Team to fix.

    Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
    1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
    2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
    Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
    Message was edited by: lawlist

    lawlist wrote:
    Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
    1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
    2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
    Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
    Message was edited by: lawlist
    FWIW, I don't have the symptoms you describe. So I think before you call a symptom a "bug" I think you should confirm that it is indeed a "bug" and not a configuration, software, or hardware issue caused by something such as incorrect installation, incorrect setup, or any other third party or user caused action.
    Also, FWIW, I don't think this forum is intended to be used as a survey for gathering "bugs". Apple has an official feedback page where they gather user experiences such as yours. I think if you post your "bugs" there they will get faster attention than posting them here in this user-to-user help forum.

  • The other day I had downloaded the latest version of Firefox and now none of the icons for the different websites I normally go to are there?

    As I said, the other day I had downloaded the latest version of Firefox and after doing so none of the icons for the different websites that normally go to are no longer there. Websites such as MSNBC, MSN, Most visited, that entire strip is no longer visible. I tired resetting Firefox and still nothing. Can anyone tell me how to get them to appear again? It's a hassle every time that I want to go to one of those sites I have to type it in the search bar, instead of just clicking on it as I did before. Please keep in mind if you answer, that I'm still learning about these things called computers and not very well versed in some of the things that you experts know:) Thanks

    On Windows XP Firefox shows the menu bar by default and not the orange Firefox menu button that is shown when the menu bar is hidden.<br />
    The menu bar is the toolbar at the top that shows menu items like File, Edit, View, History, Bookmarks, Tools, Help.<br />
    You can press the F10 key or tap the Alt key to bring up the "Menu Bar" temporarily in case this bar is hidden (View > Toolbars or Firefox > Options).
    The Navigation Toolbar shows the Back and forward button and the input field where you type the address of a site that you want to visit (aka location bar) and also has a search bar where you can type items that you want to look up with a search engine (Google).
    See also:
    *https://support.mozilla.org/kb/how-do-i-get-firefox-button
    *https://support.mozilla.org/kb/Menu+bar+is+missing
    *https://support.mozilla.org/kb/Browsing+basics
    *https://support.mozilla.org/kb/Tabbed+browsing
    You can attach a screenshot in case you still have problems with the toolbars to show what you want to change.
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.

  • What is the latest software version for my iMac? I have version OS X version 10.7.5

    What is the latest software version for my iMac? I have version OS X 10.7.5

    Welcome to Apple Support Communities
    You have OS X Lion. OS X Mountain Lion is compatible with Mid 2007 (iMac7,1 or newer) iMacs, so to check that you have a compatible Mac, press , hold the Option (Alt) key and open System Information. Then, check Model Identifier. Also, the App Store will tell you if your iMac is supported when you try to purchase OS X Mountain Lion, so you can skip this step.
    While it's being downloaded, make a backup of your files with Time Machine and check that your applications are supported > http://www.roaringapps.com
    When the download finishes, the OS X Mountain Lion installer will appear, so follow the steps. You will be running OS X 10.8.4

  • Help: I have recently downloaded the newest software version for apple products. I have a iPod touch. After the process of updating my software, my photo app doesn't work anymore.

    Help: I have recently downloaded the newest software version for apple products. I have a iPod touch. After the process of updating my software, my photo app doesn't work anymore. I can't take pictures or view them at all. Every time I try opening the app it kicks me out of it and sends me to the home screen. I have tried turning off my iPod and back on multiple times. Even double tapping the home screen button and closing my opened apps. And I tried looking for the photo app in the app store but I did not see it. So I am wondering what can I do? And is this due to the new software update? Does anyone else have this problem?

    No, I have not tried any backup tools. I havent restored my ipod back to factory settings yet and then sync everything back on it. I am kind of scared too because I dont want to lose anything. I have just been hoping some new apple software update will come out because I know several people have had problems when updating to the newest version available.

  • HT2188 How to find the software version in my unlock iphone 4?

    How to find the software version in my unlock iphone 4?

    SEARCH!!!!
    http://lmgtfy.com/?q=how+to+find+iphone+software+version

  • Software needed for the USB device, "USB Interface Controller TEST2.0"

    My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
    I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
    Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
    "Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
    I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
    "Software Update is not able to connect to the Internet. Please check your configuration and try again."
    I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?

    Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
    From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
    In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
    I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
    Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience.

  • Error - The software required for the ipod is not installed correctly.  Please reinstall itunes to install the required sotware

    When trying to load music from ITunes to my ipod I receive the error "The software required for the ipod is not installed correctly.  Please reinstall itunes to install the required sotware"
    What should I do to correct the error? 

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies. The notes below the box include tips on removing troublesome components.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
    tt2

  • What was the last firmware version for the Zen Micro before M

    I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
    Please make sure you are 00% on this.
    Thankyou.

    I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
    May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
    There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

  • Will the apple tv 2 receive a software update for the new interface?

    Will the apple tv 2 receive a software update for the new interface?

    J.T.Holloway wrote:
    I don't love it, but I don't dislike it either.  Between the two, at least initially, I think I prefer the previous interface.
    I know that will be the case for me.
    J.T.Holloway wrote:
    The new one is a little more Apple-like with icons instead of lists, but I liked having everything right on the screen before and now I have to scroll down to get to the icons below the tv screen view.
    The old interface wasn't perfect but logical - as you say the icons are for the iPhone and iPad crowd, and as i see it will entail more scrolling and button hopping on the remote.
    J.T.Holloway wrote:
    I do like the icon look as it is more like the iPad, iPhone, Dashboard, etc.
    Quelle surprise......
    It's a bit like the redesign of these discussion fora - the new layouts are designed for the younger generation but far too much scrolling and hard work to find what you want compared to the old format.
    I HATE SCROLLINGTO FIND THINGS
    Sorry, rant over.

  • I would like to update my eMac from 10.4.11 to 10.6. How can I get this os version for the update?

    I would like to update my eMac from 10.4.11 to to 10.6.x How can I get this os version for the update?

    Highest an eMac can go is 10.5.8...
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Trouble is appl no longer sells it, you have to search eBay & such for the full retail version, not any grey Install Disc.
    There are workarounds if the 867MHz is the only hangup...
    http://sourceforge.net/projects/leopardassist/
    List of Applications Not Compatible with Leopard...
    http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.

  • Pls release new software version for nokia 5233

    pls release new software version for nokia 5233

    You can't expect an update for your phone which was launched almost 3 years back. Anyways Symbian is in 'Maintenance Mode' which means no more major updates but only Bug fixes for the devices released much later ..

  • WLC software version for "N"

    Greetings -
    I have a WLC4402 currently running software version 4.2.207.0. With 802.11n just getting officially ratified I was wondering what is the "Cisco-recommended" software version for 802.11n? Should I stay at 4.2.207.0 or move up to 5.x/6.x? I have 1252 access points that are using 3560-E switches for ePoE (20w for powering both the 2.4Ghz and 5 Ghz radios).
    Any information would be greatly appreciated.
    Thx
    Joe

    Thx for the reply.
    I wanted to stay at version 4.2 if I could. Reason being is that 4.2.x has been very stable and reliable for me while I cannot say I have had the same experience with 5.x. If 4.2.x will support 802.11n then I will continue to use it. Being that the ratification was just announced a couple of weeks ago I didn't know if Cisco had version of software that they recommended for 802.11n deployments.
    Thx again for your input.
    Joe

Maybe you are looking for