HT2292 the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have no itunes access. please correct in your updates. there are others with the same error message

the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have NO itunes access. please correct in your updates. there are others with the same error message   thank you!!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Similar Messages

  • Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

    I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
    error, Location: 2'
    When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
    were illegible, but no other weirdness was observed.
    I have microsoft 2008 installed on my Mac OS X version 10.6.8.
    I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
    I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

    Hi,
    This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
    Please use the "Fix it" tool in the following KB article to resolve the problem. See:
    http://support.microsoft.com/kb/2528942
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support

  • HELLO, I HAVE THE SNOW OF LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ... THANK YOU

    HELLO, I HAVE THE SNOW LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, (EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ...) THANK YOU!

    Have a look here:
    http://applehelpwriter.com/2011/07/24/will-my-old-apps-work-with-lion/
    (Like any website owner, I may (or may not) derive compensation from my website)

  • The file .docx cannot be opened because there are problems with the contents in sharepoint document library

    I created a site and  created a document libarary and assigned a word document as a content type . I have written a workflow to create a new document . The workflow is working fine and all the document is getting created and values are getting stored
    in it .
    As per my requirement I am saving the above site as site template .
    After that I am creating a new site based on the above site template , Its getting created and I started the workflow , its working fine and the document is also getting created .
    The problem is I am getting error while opening the word document
    Error - The file filename.docx cannot be opened because there are problems with the contents .
    Details - No error details availble .
    Indresh

    What are you doing within the txt document?  Is it general text and string based items, or have you something more elaborate going on?
    An older discussion here elaborates a bit more on the dotx vs docx side of things.
    http://social.msdn.microsoft.com/Forums/en-US/de1b5ff9-ea6d-460c-a707-8c28acd4906f/error-opening-office-open-xml-file-when-using-sd-workflow-to-create-item-in-document-library?forum=sharepointcustomizationlegacy
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Cannot open Word File because "there are problems with the contents"

    Hi Everyone,
    I cannot open Word File because "there are problems with the contents" unspecified error; Location: 2.  Please help as I need this doc for work meeting this morning.  Nothing special about this doc but links were copied into it???  However I do that all the time.  I have never had this happen before.  I am on a 2010 machine.  I just ran a disk permissions repaired and emptied the trash but still no dice.  I had several other word docs up as well when I got up this morning but they are all fine.  I do not have Time Capsule turned on (which I need to do but that will be another thread/question).
    Thank you,
    sb

    Ok, I found a way to open this but not sure what happened to begin with and the formatting setup is different now, almost like text editor?  Not sure what happened here but hope it doesn't happen again?

  • What's the best cover for the new iPad (3rd generation).  I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

    What's the best cover for the new iPad (3rd generation).  I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

    The best cover is the one that suites your needs. Try Google. There are dozens on the market.
    As for the Apple Smart Cover, it does work with the new iPad. There are a few reported issues with it, but that doesn't come close to representing the totality of folks with it.

  • Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

    I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
    If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

    A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
    And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

  • File cannot be opened because there are problem with the files

    Hi
    My program reads the data from file uploaded into SharePoint 2010 and massage with the list information. It finally creates a new document and prompt the end user to save it. When user opens the saved document it consecutively prompts with the below two message
    How to turn off this warning messages? When I re-save this document with different name and open it again (any number of times) then the above messages
    stops prompting. I want these messages should not appear even in first time as well. I tried to add these document on trusted location and also removed the protection settings but it does not help. Is there any setting requires to suppress these warning messages? 
    Any help will be greatly appreciated.
    Best Regards,
    Imran

    Hi Imran,
    your document is damaged. Pls try opening new and fresh documents
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/921c57a4-6120-419d-a612-07d4826eebcb/the-file-cannot-be-opened-because-there-are-problems-with-its-contents?forum=word
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Workflow created documents gets error "File ... cannot be opened because there are problems with the contents"

    I have a list that when an item is changed a workflow kicks in and checks if certain fields are checked. Depending on which field word and excel documents are created in another document library.
    Now this worked perfectly in my Sharepoint 2010 environment, but after moving the site to Sharepoint 2013 this particular workflow doesn't seem to work anymore.
    I've tried to create the whole thing from scratch but still the same issue.
    The issue is the same even if using the default content type, or trying to open the document using Explorer view. I've also tried recreating the function in a different site without 2013s visual upgrade without any luck. It's like something have changed
    in the architecture.
    So does anyone have an idea to why workflow created documents don't work anymore?

    I don't think the issue lies with SharePoint. Do you still have your 2010 environment around so that you can test and see if the issue appears? Seems to me that the Word global template has got corrupted. I have faced this issue in the past but that was
    under entirely different circumstances. Anyhow, I renamed the normal.dotm file and it helped resolve my issue. I am not 100% sure if it will work for you as well, if you want you can give it a try.
    Refer to the below link:
    http://support.microsoft.com/kb/918429
    Exit Word.
    Click Start
    Collapse this imageExpand this image
    In the Start Search box, type the following text, and then press ENTER:
    %userprofile%\appdata\roaming\microsoft\templates
    Right-click Normal.dotm, and then click
    Rename.
    Type Oldword.old, and then press ENTER.
    Close Windows Explorer.
    Start Word, and then open the document

  • Yes... There are issues with the new iMac, early adopters baby!

    Hi, I am a new iMac owner.
    Being a network engineer and having worked for the "devil" himself, let me tell you... I would rather be dealing with the tiny glitches with the new iMac than owning a Dell, Toshiba, HP but most importantly running Vista!
    This is a new machine with new HW and drivers. I enjoy trying the latest and the greatest. I realize there will be hurdles to overcome with any new product, but come one people! Let's stop whining, and help everyone out here. We are all here to provide constructive feedback to Apple while helping everyone out.
    Yes there Display issues.
    Yes there are Keyboard issues.
    Yes there are WoW issue and UT as well.
    Target disk issues.. Yes
    Lock ups.. sure!
    My suggestion... If you think you are better off with a PC and Vista, well go to it mate!
    Sorry for the ramble, but I just got tired of all the whiners thinking that buying an iMac was their solution to never having issues by leaving the PC world, or should I say MSWorld... LOL

    I think few, if any people claimed they were going to ditch their new iMac for a PC. I like Macs, but I don't love them like I used to.
    Half the reason people buy them, is because they think they can rely on Macs more. They are supposed to be stable, fuss free and easy to use. And they still are for the most part.
    But these new iMacs make a complete mockery of that because they don't represent very well what Apple stands for. "If" I bought a PC I would honestly expect some problems here & there. Its just part and parcel of the PC package. And although I don't expect Macs to be 100% perfect 100% of the time, I certainly expect better than this diabolical shambles that is the new iMac.
    Just as an example.. My 4 year old G4 powerbook.. Not 100% problem free, granted. But mighty close. However, it has not crashed once the entire time I have had it. My new iMac however, crashed 4 times yesterday alone, and it didn't even get used as much as my old powerbook.
    Maybe now you get the picture a little better?
    Just my 2 kernel panics worth...

  • Thought my computer was acting up- but I see there are other people with issues with the extension mgr.  Hope it's up and running soon!

    Well, I thought my computer was acting up, but I see there are others with extension manager issues! Any ideas when it will be accessible again?

    The flashing folder/question mark means the computer can't find a volume to start up from. See this Apple article for steps to take. But since it was running very slowly, I won't be all that encouraging that this can be resolved using those steps. It probably means the internal hard drive died. The slowness may have been a warning it was about to fail.
    http://support.apple.com/kb/TS1440
    PS>>> I also have an external hard drive if that helps!
    Well, it may help enormously if you had all your data backed up there to restore from, if it is clear you need a new internal drive. What kind of backup was it, a clone or Time Machine?

  • Is there a problem with the latest iTunes update?

    After getting the most recent iTunes update my iPhone is no longer recognized by iTunes. When its connected to my computer it charges but you can't see it on iTunes and none of the content can be accessed. I've never had this problem before, and it doesn't happen on my other computer with an older version of iTunes. I've gone through the troubleshooting suggestions for this on the Apple site but nothing seems to work. Is there a problem with the new update? And will it be getting fixed soon?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'.  Is there something wrong with the latest installer? (11.3.1)

    Getting error message as shown: "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'.  Is there something wrong with the latest installer? (11.3.1)

    Installs fine for me, so I'd guess you got an incomplete or corrupt download. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links and download a fresh copy of the installer.
    tt2

  • Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there

    Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there...Apple...PLEASE update and give us back the old version of iTunes...

    Pull down View > Show Sidebar. This will give you back the same functionality of iTunes 10.x.x.

  • I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    Hi Seattle
    From Adobe site only!
    flashplayer11_b1_install_mac_071311.dmg
    Works fine.
    Cheers Tomi

Maybe you are looking for