HT2375 Using logic 9: play back of all project files now has problems:  Track volumes are way off - if panning is set to center then you cant hear that track? Even if pan is adjusted tracks are low and or distorted I have looked at core/built in audio

Been having project play back problems for about a month.  Sometimes when I open a project the volume of certain tracks is low and or distorted.  Oddly if a midi track is panned to the center (0) its volume is too low and if I pan right or left the track becomes louder.  Sometimes this doesn't help and if it is an audio track things become distorted. 
Although things have been working good for about a year now I think it has something to do with the fact that I have to take the laptop to work and use headphones/built in audio for play back and then take it home and use different audio interface but I can't be sure.  The settings in preferences/audio/devises seem to be correct.
I have not added any plug-ins recently.  I have not downloaded any new programs recently other than a NI tutorial video (shouldn't have any affect) but I am trying to use a new midi controller but again that shouldn't have any affect on play back of existing track?
Any suggestions?

Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

Similar Messages

  • I am using an iMac and i am selling it tomorrow. So i am trying to back up all my files on my transcend external HD 500GB. I am not able to create a folder in the transcend and also even if I try to copy a file in the transcend folder. It just wont happen

    I am using an iMac and i am selling it tomorrow. So i am trying to back up all my files on my transcend external HD 500GB. I am not able to create a folder in the transcend and also even if I try to copy a file in the transcend folder. It just wont happen. Please help !!
    My transcend HD is on read only mode I guess. What to do? I dont have a windows computer to check and I need to create the back up right now..

    Welcome to Apple Support Communities
    It looks like the external disk is formatted in NTFS, a format that OS X can't write in. The solution is to format the external drive in "Mac OS Extended (Journaled)" (if you are going to get a Mac), or "MS-DOS (FAT)" (if you are going to get a PC) as Format in Disk Utility > http://pondini.org/OSX/DU1.html
    Then, you will be able to copy the files you need to the external drive. Note that "MS-DOS (FAT)" doesn't support files bigger than 4 GB.
    <Edited By Host>

  • CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!?  HELLL

    CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!?  HELLLLLPPPPP!!!!

    We can not see your computer, your settings or even know what your source files are because we are not in the same room as you are!
    We cant see what you are doing wrong ...so you will have to tell us a lot more and show us some screen grabs of your settings.

  • I'm need to sell my MacBook and need to back up all my files includingn itunes will I be able to do so using an external hard drive?

    I'm need to sell my MacBook and need to back up all my files including itunes will I be able to do so using an external hard drive?

    To copy your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html  Check that it's set up right by booting up from the external drive.

  • I am using using IDVD to create slide shows.  When viewed on my computer the pictures are clear and of high quality.  When I burn the slide show to a disk and play it back, the pictures are blurry and of poor quality.

    I am using IDVD to create slide shows.  When viewed on my computer, the pictures are clear and of high quality.  When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality.  Is there a setting that controls the quality of the burn and if there is, where do I find it?  Thank you.

    The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

  • I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS  without formatting it so that I can use it for Time Machine and the like?

    I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS  without formatting it so that I can use it for Time Machine and the like?

    There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both

  • I had to do a system restore on my PC.  I backed up all program files and want to reinstall iTunes.  Can I do that and restore all of my itunes settings, playlists, etc?

    I recently had to do a system restore on my PC.  I backed up all program files to an external hard drive.  I'd like to reinstall itunes, but I was hoping to get back all of my settings, playlists, etc.  I can't seem to figure out how to find the appropriate file in the itunes folder of what I backed up.  Is there a way to reinstall itunes from scratch and restore my old settings?

    The Windows System Restore process shouldn't affect your iTunes library. If you restore to a time before you installed iTunes then you would need to reinstall the application, but the library would be fine.
    Restoring your entire system to factory settings would wipe your library.
    Either way you should backup your library on a regular basis and before any major change.
    tt2

  • I updated imovie and I Used to be able to save as Quicktime file, now not an option & files are so large when I save as mpeg4 and just rename them. Please help!

    I updated imovie and I used to be able to save as Quicktime file, now not an option & files are so large when I save as mpeg4 and just rename them. Please help!

    Actually it is easier than I thought. It is H264 but the wrapper is m4v. You can just change that in the finder to .mov and drop it into iDVD. iMovie will send it to iTunes so just right click on it in iTunes and select reveal in finder and then copy/paste to desktop and change to .mov. Then drag into iDVD. Really easy.

  • Okay so my computer shut off randomly and lost all the files i had open- is there any way to recover these? like some sort of back up? i thought macs autosaved?

    okay so my computer shut off randomly and lost all the files i had open- is there any way to recover these? like some sort of back up? i thought macs autosaved?
    pleasee help

    WIll the window software Wondershare Dr.Fone not recover the photos from the phone if you download or upload it to iTunes? It states it does?

  • I have a mac os 10.5.8, i want to upgrade to mac os snow leopard, can i keep all my files (documents, music on itunes) without backing up all the files first on a external device prior to the upgrade?

    I have a mac os 10.5.8, i want to upgrade to mac os snow leopard, can i keep all my files (documents, music on itunes) without backing up all the files first on a external device prior to the upgrade?

    I strongly advise against upgrading the OS without first making a backup. Were something to go wrong you would lose all your files without the backup. See:
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • As of today, neither sample songs on the music store nor songs already downloaded will play correctly.  They are stuttery and slow.  I have iTunes 10.5 and have not downloaded any upgrades for anything recently.  They were working last night. Thoughts?

    As of today, neither sample songs on the music store nor songs already downloaded will play correctly.  They are stuttery and slow.  I have iTunes 10.5 and have not downloaded any upgrades for anything recently.  They were working last night. Thoughts or advice?

    I found a solution that worked for me.  Here is what I did and where I found it.
    "Looks like I tracked down the problem, it worked for me so I hope this works for everyone else experiencing problems.  Go to your Task Manager and locate the program APSDaemon.exe (Apple Push)..... if you see this executing terminate the program and then startup iTunes and it should come up fine.  You will see afterwards that APSDaemon.exe (Apple Push) starts back up but this is fine as long as iTunes has already started.
    I tried playing both music and syncing up my iPhone with no problems.  Note if you shutdown iTunes again you will have to terminate the process APSDaemon.exe (Apple Push) again.  Haven't had time to see what in the world Apple Push is but this appears to have corrected the problem so that you can at least use iTunes and sync any device that needs to be synced.
    Hope that helps everyone!"
    https://discussions.apple.com/message/16998456#16998456

  • Are operating files only within Windows (C:) or are Word and Excel files ok in Documents and (C:) folders in 8.1?

    A Microsoft tech said "oh-oh" when he saw Word and Excel files, and I think other files, in Windows (C:). He said only operating files should be in that folder or a user might delete an operating file by mistake. I have Word and Excel files in
    both (C:) and Documents folders. There is some overlap but there are different files in each. When I open a Word file it defaults to (C:) not Documents. Sometimes default location is SkyDrive. So unpredictability is my experience. The questions are what is
    correct default and how to make it so.
    Microsoft store in San Diego transferred files from old computer to new one and this default is how the computer was set up.

    Hi, Tyro.
    What a mess. Usually system files in the Windows folder are protected from being deleted by users, but not all of them.
    Here are some ideas:
    Go back to the Microsoft store and tell them to fix it. They caused it, it was their mistake, they are responsible to fix it.
    If that is not possible because they are too far away... find another Microsoft Store if possible and have them fix it.
    Last resort: If it was me, I'd just back up all the files that I care about onto my SkyDrive (now OneDrive) account or a reliable thumb drive. Then do a factory re-image. Maybe back up the files and make the MS store do it. If I had purchased Office
    2013 (it sounds like you have Office 2013), then I would have them reinstall that as well.
    Keep the store involved because it is their fault.
    At least call the MS store in San Diego and ask them what they suggest. Put them on the spot. They are the ones that screwed up and are responsible for the copying process.
    Good luck!
    Best wishes, Davin Mickelson

  • Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk.

    Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I have an i mac and if I go to Finder and all my files it has made hundred of photos from the faces of virtually all the photos I have on the computer, how do I stop this happening ?

    I have an i mac and under images in  All My Files it has made hundreds of face photos from all my pictures in i photos, how can I stop this ?

    Hmmm, so it's taking new pics all the time?
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for pic problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

Maybe you are looking for

  • There is no object in Repository Browser

    Hi expert there are two sap systems which are trial version, one is sap 640, the other is sap 700. when I go to SE80 with user "BCUSER", there is no "Internet Service" in Repository Browser tab. I want to create service by " internet service ". is it

  • Headstart Designer generated form crashes with Java EOF error

    When closing a form while in Enter Query mode, the form crashes & user is disconnected from the database with error: FRM-92100: Your connection to the server was interrupted. Details: Java Excepton java.io.EOF Exception at java.io.DataInputStream.rea

  • I want to display  -ve values within parathesis in Analyzer

    Hi Experts, Whenever i get -ve values ,i want to display it within parathesis in Analyzer .   In backend if value for are as follows    A    10   -20    30 Need the output as follows   A   10   (20)   30 Please suggest on this. Thanks & Regards Samee

  • (sorry for double thread) I have problems installing and uninstalling

    sorry that i posted 2 things in one day but  whenever i uninstall After effects it gives me a message at the end that says "some problems occured while uninstalling please look below" there are no messages below and i cant do anything about it. also

  • Jumpy mouse movements on Asus netbook

    Just installed FF 4.0 and using it on an Asus netbook 1101HA. Whenever I use the mouse on a website, the mouse moves erratically, noticeably erratic. This problem is not apparent in any other app. (I'm using the mouse pad and not an external mouse.)