HT2486 the photos that I add to address book will only be there for a few seconds after I close the edit button. Either they go away completely or they a very small portion of the actual photo

the photos that I add to address book will only be there for a few seconds after I close the edit button. Either they go away completely or they are very small portion of the actual photo

Frank, thanks for your note.  I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it.  Too much to ask?
And yes, I upgraded the Aperture 2 Library first.  [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.]  That step took a number of minutes, but seemed to work fine (no error messages of any kind).
Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so.  As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely.  You did see the blurry example I included, didn't you? That is what each and every photo looks like.
Text-box content appears to have been rendered pertectly, for the record (including captions).
So, ... is this result something you have heard of before?  Do you know of a one-step solution?  Or am I looking at an extended picture-by-picture fix?

Similar Messages

  • My iPhone is getting stuck for a few seconds everytime I do something,  if i type a letter it will type it twice or a few times, if i click to close the browser it stucks there for a few seconds before closing, if i try to open some app it gets stuck ther

    My iPhone is getting stuck for a few seconds everytime I do something,  if i type a letter it will type it twice or a few times, if i click to close the browser it stucks there for a few seconds before closing, if i try to open some app it gets stuck there.
    I have restored it and loaded the backed up material again. But this problem doesnt seem to go away. Sometimes it is too much sometimes it is not noticeable, so what exactly could be wrong and what ALL should I do to get it fixed?  Please reply.

    Thank you. You are very kind. First I backed everything up, then restored as a new phone, and then i couldn't see the contacts, the contacts were not restored when i restored as a new phone. So in order to get the contacts I restored from the backup but then the same problem happened again.
    What I meant to saw was that the probelm disappeared when i restored as a new phone, but it reappeared when i restored from the backup. So is there a way to just somehow get the old contacts when the phone is restored as a new phone. All I need from the current phone is the contacts to be there when I retore as a new phone.
    I hope I am clear.
    Kindly help

  • My iPhone is getting stuck for a few seconds everytime I do something, if i type a letter it will type it twice or a few times, if i click to close the browser it stucks there for a few seconds before closing, if i try to open some app it gets stuck there

    My iPhone is getting stuck for a few seconds everytime I do something,  if i type a letter it will type it twice or a few times, if i click to close the browser it stucks there for a few seconds before closing, if i try to open some app it gets stuck there.
    I have restored it and loaded the backed up material again. But this problem doesnt seem to go away. Sometimes it is too much sometimes it is not noticeable, so what exactly could be wrong and what ALL should I do to get it fixed?  Please reply.

    I did that many times, I mean I do it everytime. But it doesnt seem to help. It is strange sometimes the phone is slow and stucks for a many seconds, sometimes it is just one or two seconds. Thank you for your help though, but is there something else that you could think of?

  • My iPad suddenly started to show crazy colors.  I turned it off and had to use the two button trick to turn it back on.  Now it shows only green stripes for a few seconds and goes back to sleep.

    My iPad suddenly started to show crazy colors.  I turned it off.  It would not reboot until I used the two-button reboot.  Now it shows only green stripes.  only for a few seconds and goes back to sleep.  HELP!

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove all apps from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red to delete all apps from this list.
    - Press the home button twice when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • HT1688 I recently upgrade my Iphone but the old one is still active. I installed the friendjectory app on my new phone but it will not open but for a few seconds ab=nd then closes. What is wrong and what do I need to do to make this app work on my new pho

    I recently upgraded my Iphone. Iinstalled the friendjectory app on the new phone but it will not open but for  few seconds and then closed. What is wrong and what do I need to do? My old phone is still active and working. Do I need to do something about that?

    Hi stanczak53,
    Welcome to Apple Support Communities.
    See this link for some tips on troubleshooting apps on your iPhone:
    Using apps on your iPhone
    http://www.apple.com/support/iphone/assistant/application/
    Best,
    Jeremy

  • Adobe reader hanging for a few seconds after opening, what's the cause?

    Hello, I have the following problem: I open a pdf file in Adobe Reader and initially it woks fine, I can navigate and so on, but after about 20 s it suddenly gets like frozen so that I can do nothing but wait until when after about 15 s it recovers and I can continue reading and moving around. It is just an annoyance since it happens every time I open a document. I have installed several actualizations (icluding the last one) of the program but the problem is still there. It is like if some conflictive process starts shortly after the openning and after it finnishes the program works fine again. I have looked in the tasks administrator to see if I find some parallel process that may start itself but as far as I can see nothing more starts after AcroRd32.exe.
    Some idea?
    Thank you in advance

    If you have a packet sniffing tool like Fiddler or Wireshark, could just see if Reader is trying to access something on network?

  • Yesterday I installed "Mavericks" on my two identical machines (office and home, iMac i5 27'' late 2009) and now the cursor freezes for a few seconds after quitting an application on one machine and the the track pad stucks with safari - unsatisfying!

    Even the back and forward buttons do not work than. Allover the complete installation process went different on both machines. One started the installation twice immediately after completion. I dont know what's wrong, I never have had such a trouble with Mac OS. I can't help myselfe an I am highly disappointed about Apple!
    Markus

    After a few Google searches and a few downcasted days, I had to realize that I have to apologize to Apple, it was seemingly not alone their fault.
    All trouble makers to Mavericks are accumulated in my environment:
    External WD hard drives get in conflict with the nem Mavericks OS X, as well as drivers software from Logitech (LCC), which all is in use with my system.
    Delete the WD software of external hard discs and uninstall (use uninstaller) the Logitech control center (LCC) and all is fine again.
    Have fun with Mavericks, a just started to love it....
    Markus

  • The mouse pointer gets frozen for a few seconds after waking up from sleep mode

    I have just noticed this recently and I have updated all my software but it is annoying to have to wait like 20 secs before it responds.

    Me too.  If I press the esc key, the pointer completely disappears from the screen and then reappears 20-30 seconds or more later.  Very aggravating.

  • I am using photos . I add a camera and make my photos slide in.  How do I add a second behavior to the photo to make it slide out.  I want the photo to hold on the screen for a few seconds in between sliding in and sliding out.

    I am using photos in Motion 5.  I add a camera and make my photo slide in.  How do i add a second behavior to the photo to make it slide out?  I want the photo to hold for a few seconds in between sliding in and sliding out.  When I am trying to do this  I am not getting the photo to hold, i am making one continuous motion which I do not want.
    Thanks

    Are you using the "motion path" behavior? If so just duplicate it and drag it down the timeline to where you want it to start. Trim it to end at the end of the project. The gap you leave in the timeline between the two behaviors is your hold time. Not sure why you are using a camera unless you have a behavior on the camera.If you are using keyframes just set two keyframes at the same position values in the inspector for the hold time.

  • I made a DVD with photo's and music. On my Powerbook G4 he plays perfect. But after burning the project on my LaCie d2 lightscribe and show the project on my TV than after 10 min. the music stops for a few seconds.

    I made a DVD with photo's and music. On my Powerbook G4 he plays perfect. But after burning the project on my LaCie d2 lightscribe and showing the project on my TV than: after 10 min. the music stops for a few seconds. On the screen of the DVD-player I can see that after the word 'play' the clock starts again with counting the time. I tried everything: * burning slow. * all programs stopped, except iDVD. * all other apparature uncoupled. Is this a problem of my iDVD-program or my LaCie burner?

    mishmumken is correct about the 99 slides.  There's an 99 chapter limit in each slideshow for DVDs and each photo is considered a chapter.  iDVD gets around that by renaming slide 100 back to 1 and goes on. 
    The pause can be minimized (but not eliminated) by burning to disk at the slowest speed available: usually 4x or 2x.  Save the project to disk (File ➙ Save to Disk menu option) and play the disk image with DVD player to check out the transition at 99 and 198.  Then burn the disk image to disk with Disk Utility at the slowest speed possible.  Also use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • I just switched from a blackberry to a new iPhone 5 S - I would love to be able to add my address book to the new iPhone.  How do I do this easily without having to manually add each no.?

    I just switched from a blackberry to a new iPhone 5 S - I would love to be able to add my address book to the new iPhone.  How do I do this easily without having to manually add each no.

    Unless your carrier doesn't have the required SIM card size, you can get a new SIM card from your carrier. There is usually no charge for this.
    If you don't have an Apple iCloud account or if you do being accessed on the iPhone with contacts turned off for over the air syncing, you should be able to transfer contacts from the Address Book app on your Mac via the iTunes sync process. This is selected under the Info tab for your iPhone sync preferences with iTunes followed by a sync.
    If you have an iCloud account, you can sync contacts over the air with the Address Book on your Mac. After confirming your contacts are available with your iCloud online address book - checked by logging in with your iCloud account using a browser on your Mac, you can then turn Contacts on for over the air syncing with your iCloud account settings on your iPhone and your contacts will then be available there and kept synced automatically over the air between your iPhone address book, your iCloud online address book, and the Address Book on your Mac without having to sync with iTunes for this.

  • What is the maximum number of contacts Address Book will support?

    We are a small business who have recently switched over to Kerio Connect. We are currently using Mac Address Book to store & share contacts (sharing via MobileMe), but have been told by our IT support company that we have too many contacts (approx. 4500) and Address Book will not support this many. They have said that this is why we are having issues with contacts emails and phone numbers scrambling. Is there a limit to the amount of contacts that Address Book will support?

    Having values shuffle in the fashion described is indicative of a database corruption or an application bug, and that can (also) effect performance.  I'd suggest trying to get a footprint of that problem, and then report it to Apple.
    And there is no "lol" matter here.  4500 is a comparatively large number of contacts for Address Book Server, and no, AB doesn't tend to scale all that well and isn't (per information attributed to Apple) intended as a shared contact store.
    See this thread and (as you'll learn as you read that thread) make certain your DNS configuration is valid.  Within that thread, specifically see Dr Timbo's post circa Dec 14, 2010 7:31 PM in that thread, and Strontium90's post circa Dec 23, 2010 3:03 PM.
    Just because there's an SQL database underneath doesn't imply that the design will scale, nor that the application will have acceptable performance.  It's possible for an SQL database to have millions of records and to run fast, and it's equally possible for a database to have several dozen records and the application can run slowly.

  • I have 67 email addresses I want to add to address book into a group, how do I do that

    I have 67 email addresses I want to add to address book into a group, how do I do that

    What version of the Mac OS are you running?

  • We are unable to have iPhoto books shipped into Canada, because the shipping address field will only accept US zip codes. Any solutions?

    We are unable to have iPhoto books shipped into Canada because the shipping address field will only accept US zip codes. Any solutions?

    Have you set the Print Products Store to Canada in the iPhoto Preferences > Advanced Panel? 
    This determines the address format.
    And your billing address and shipping address must be in the same country, as defined for your AppleID and credit card.

  • Message: "Administration rights are required to complete Adobe Add-ons installation or removal" - this pops up every few seconds after installing CC 2014. When I double-click on it the CC console opens but is entirely blank. What can I do?

    Message: "Administration rights are required to complete Adobe Add-ons installation or removal" - this pops up every few seconds after installing CC 2014. When I double-click on it the CC console opens but is entirely blank. What can I do?

    Some saved Mac links that may help
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

Maybe you are looking for

  • Pen Drive (HP V-220 W 8 GB ) not working

    This is regarding a pen drive HP V-220 W 8 GB.  It has stopped working and is not being detected by the system. I have some important data stored in it. I contacted HP at Customer Care Number in India and I was told that my pen drive can be replaced

  • Hard Drive not showing up

    Hi all. I've got a macbook pro 13-inch unibody that has a boot up problem. It was fine until a couple nights ago when the laptop slipped off my wife's lap and onto my arm. it wasn't a big fall but i got shocked by the heat so i accidentally hit the l

  • Webi Report Schedule failing in BI Launchpad

    Hi, I am wondering if anyone has come across this error message when trying to schedule a webi report in BI Launchpad. Firstly, the webi report refreshes successfully in BI Launchpad. The source for the Webi report is an OLAP universe that was migrat

  • Installing Yosemite failed om 2012 Mac PRO

    I have tried to install Yosemite on my Mac PRO (OS X 10.9.5) It looked good in the beginning but turned out to be a total disaster. I couldn't start my computer again. I tried it again but it failed again! Now I put OSX 10.9.5 back on again and lucki

  • Tomcat problem (10 Dukes)

    Hi, I'm trying to install tomcat 6 on x64-86 linux. I downloaded core tomcat package, then I unpacked it. Server starts with no error messages (using $CATALINA_HOME/bin/startup.sh). Everything seems to be ok, but , I can't to connect to the welcome p