HT2508 How can I record my voice through my Mac?

How can I record my voice to my Mac?

Use GarageBand.
In GarageBand, go to the Track menu and add a New Track to your project. When the box comes up, click "real instrument", then "create". Unless you have external audio hardware connected, the default audio input for the track should be the internal microphone of the computer.
Or use QuickTime. Open QuickTime, go to File>New Audio Recording.

Similar Messages

How can I record my voice on iMovie without needing to place a photo or video in?

I'm trying to make an anime review. But before placing photos in it, I wanted to record my voice first before adding pictures in it. So I was wondering what do I do to actually get my voice in it without it being cut because there were no photos or videos placed in? (I use a macbook)

You could insert a bunch of placeholders in the timeline before doing the voiceover.
You can find a range of placeholders (they are actually templates used in iMovie Trailers) in the Maps, Backgrounds & Animatics browser. This is the last browser at the end of the centre toolbar, after the Titles and Transitions browsers. Click on it and scroll down to see all the animatics (aka placholders or templates). Drag a number of these into your project timeline - as many as you think you need to cover your audio.
When you've finished the voiceover, drag photos directly onto the animatics and select Replace from the pop-up menu. Adjust the timing by using the Inspector (double-click a photo to open the Inspector, then change the duration).
John
EDIT: Sorry, beaten by Bengt (again)!
Message was edited by: John Cogdell

How can I record my voice in my MBP

I am a new Mac user and I was wondering if I could record my voice in my MBP?
I didn't buy any additional software but the one that comes with the Leopard.

I don't know what "came with your Leopard" but if Garageband "came with your Leopard" you will be able to record your voice in that. You can also try Audacity which is a free recording/editing program for Audio.
Wrong Forum by the way...

How can I record EAX voice effect

Hi,
I have a SB 5. board in my machine and in EAX Control Panel I've beeing joking a lot with some voice effects like Zeus or Chipmunk.
But when I try to record my Microphone sound using any kind of program, those effects are not recorded, only my normal voice. For voice chats, the result is the same: I can hear my voice modified but other people don't.
So, how should I proceed to record those effects and/or make then 'hearable' for other people thru voiced chats like MSN or SKYPE ?
Thank you,
Kurt

See User's Manual page 3-3.
If you do not have a manual you find it here from
If your card is Bulk then you find the manual from here.
If you do not have the Creative Surround Mixer -software then install it first
(bundled with your card (CD)).
The rec level is the red (left most) slider and the source selector is above the
slider. Select there "What U hear".
.jtp

How can I record a voice over and save as MP3?

Good morning! I do voice overs. In my studio I STILL have a PC and use adobe audition. For my day to day business I know have a MAC BOOK PRO. I am going on vacation and need to record on my MacBook Pro with Garage Band.
I have successfully set up my Mic(studio Projects C1) and my travel PreAmp (MAudioDuo) to record in Garage Band. All I need is dry voice. I have recorded a track but need to save is as an MP3. The test track I recorded is about 15 seconds long but yet plays for 30 seconds...I have deleted everything after the voice but it still seems like the track is longer. I have to put in MP3 format. How do I do this? This is a nice program but looks like it is too much for what I need it to do. So, any other recommendations on more appropriate software is appreciated if needed.
Message was edited by: suesmac

yet plays for 30 seconds.
move the end of project marker to the 15 second mark:
http://www.bulletsandbones.com/GB/GBFAQ.html#eos
I have to put in MP3 format.
when you "share" it, tick the Compress checkBox
any other recommendations on more appropriate software
any audio editor could be used as well:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors

How can I record my voice?

A few months ago I upgraded from my faithful PowerMac G4 to a snazzy flat white iMac G5 with Tiger. I'm finding that there are lots of things I can no longer do and one of them is recording new alert sounds, welcome messages and so on. In Sound there doesn't seem to be a 'record new' option. I have the internal mike of course and headphones with a mouth mike that i use with Skype.
Help!
Garland

Your iMac came with GarageBand. It can record. I know it has problems recording from iSight microphones so I don't know how the iMac's internal microphone will work.
To add alert sounds, save your sounds in AIFF format and then follow this tip:
http://www.mactipsandtricks.com/tips/display.lasso?mactip=107

How can I record a guitar and my voice (only voice with mic) at the same time ?, how can I record a guitar and my voice (only voice with mic) at the same time ?

how can I record a guitar and my voice (only voice with mic) at the same time ? I have one interface with Input 1 mic, Input 2 guitar, everything is working correct, but how can I activate multi recording or something like that... thanks

Set your inputs on your channel strips and make sure you have one set to input 1 and the other input 2. Arm the 2 audio tracks(the "R" in the track header. They will turn red and flash), then hit the record button.

How many min. can i record with voice record with MuVo V200 1

Hi,
I'm going to buy the Creative MuVo V200 GB.
Now my questions about this player.
How many minutes can i record over voice recording.
Maybe someone can tell me how much Megabytes minute of recording will take.
Are there different quality levels of recording?
In which format does the player save the recordings?
I will use the player to record lectures at the uni'versity.
Did anyone have done this?

HT2508 My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB

My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB in?

AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

How can I record an audio sound and convert it to a ringtone?

How can I record an audio sound and convert it to a ringtone?

Record your voice using iPhone (for ringtone only 35 secs or under are valid), sync iPhone with iTunes.
In iTunes the recorded voice is listed under Music as some_numbers.m4a.
Right click on the item and choose Create AAC version.
Drag the converted voice onto the desktop.
Delete the voice copy in iTunes. (important step)
On desktop, rename the some_number.m4a to something_more_intelligent.m4r
Drag it back to iTunes and you will find it under Tones.
Now select it (for sync) and connect your iPhone, do a sync.
If everything works out, it will be in Settings > Sounds > Ringtone.
Now choose a contact you want to assign this ringtone, tap Edit and add the ringtone.
Hope this helps.

Can't record into Logic through the built-in mike

Hi guys, just faced a strange thing in Logic 8, want to record my voice through my MacbookPro's internal mike, so in Audio preferences I've put an in-built input, in System preferences put input and output to in-built speakers and mike, but I can't move the track level meter in Logic with my voice at all, and there's no waveform, no sound is going inside, i got just an empty audio region, while in the System's preferences window the level meter moves when I'm saying sth...What can it be?Anyone faced the same?
Thank you

you need to select the build in microphone as the input in Logic Audio preferences as well.
it's the 1st on the drop down menu in Input Device Logic's Audio prefs.
And mute the output of the build in speakers or wear headphones
A
Message was edited by: immo

How can I record an Audio Instrument (saxophone) and listen to a reference track at the same time?

How can I record an Audio Instrument, and listen to a reference track at the same time?

Are you using an external audio controller or the line-in and headphone jacks on the side of your computer? You shouldn't have an issue using headphones when you're recording through the line-in but you may want to make sure you have monitoring on and it's going to the right place.
If you're using an external audio controller, try making an aggregate device combining the controller and the "built-in output" into the same device. Go to Applications/Utilities/Audio MIDI Setup, click the "+" sign at the bottom left to make a new device and check the "use" boxes to the left of the physical devices you want to use as part of that aggregate device. That is how I use the computer's speakers or headphones to monitor my input as opposed to only being able to use the output on my audio controller.
Now that I see some of the questions on the side of this page I realize that the 13" MBPs seem to have only one combined input/output jack... That is an incredibly stupid feature. What on Earth could possibly justify that design decision? I suppose if that's the problem you're having you'll have to buy some sort of splitter (if they even make them) or get an external audio controller like an Apogee Duet or something along those lines. I would be furious if they combined those two jacks on all of the MBPs.

How can i download my voice call conversation

Hello,
Could someone please tell me, how can i download my voice call conversations. Its very importantn for me to get this download. Please reply me asap or could someone give me the skype customer support contact number so that i can talk to them and request to send those files.
Thanks.

Hi, VoiceCallConv, and welcome to the Community,
If you mean transcriptions of your calls or the recordings, Skype does not record any calls. Only third-party add-on software such as can be found in the Skype App directory could do this.
If you are referring to lists of calls, and the information provided in your account is not sufficient (check your My Usage, where you can export the call history), again check the Skype App directory under the Chat Management sub-heading. The Super Users tend to recommend a freeware product offered by NirSoft. My favorite is RecollX.
Here is a link to the Skype App Directory: http://shop.skype.com/apps/
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

How can i get magic voice changer on my nokia c6?

hi just wondering how can i get magic voice changer on my nokia c6? please if anyone can help thanks!

Make sure your own music files are saved in the proper folder (Digital sounds) whether in your memory card or the phone memory, the location should still be:
Sound Clips > Digital Sounds.
If your songs/mp3s are saved anywhere else, it will not show up as a selectable ringing tone.
You can move your songs through File Manager on your phone if they are in the wrong location (Options > Move to folder).
Hope that clarifies it for you.
"Try not. Do or do not, there is no try."
If you found someone's comments helpful or like what that person has to say, please give some Kudos to the post!

How can i solve a issue through remeady

how can i solve a issue through remeady..
With Regards
Prasanta

Hello,
Remedy and other similar products are the tools which track the Action / Time taken for resolving a call. Normally, once an issue is reported, that will be recorded in a tool with an estimated fix time. If the call is not fixed / actioned within the estimated time, it go as breached.
The analyst need to update the call status in the tool. They will need to update the actions taken, call notes ..etc. Once the issue is fixed, you may set the call status as resolved. Once you set the status as resolved, the user who riased the issue will get an e-mail. They will confirm whether the issue is actually closed or not. Depends upon their cconfirmation, the status will be set to Closed or again Reopen.
This is a typical helpdesk tool scenario.
Prase

HT2508 How can I record my voice through my Mac?

Similar Messages

Maybe you are looking for