HT2553 I received an itunes update. I tried to install it. There is a message stating that it did not install correctly. I tried to open my iTunes on my desktop icon and it won't open - giving me the same message. Please help? Thank you Connie
I have a error message that says the iTunes update did not download properly and I can no longer open my iTunes icon on my desktop. Any suggestions?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Similar Messages
-
Hi I am new to Apple devices, i got a new Ipad mini and i am trying to download skype from the Istore,it asks me to review my account and if i give all the details and click on next, it come to the same page,please help
Oh thank you very much, i was worried after a whole day's hard work but most important that i had lost my photos, i don't understan the photo,shared and albums? I have a lot of photos in my albums that it didn't let me delete, yet i could delete a lot of others, could you explain this to me please
-
AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.
To use AirPlay, you need the following:
1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
2. Apple TV (2nd or 3rd generation)
3. AirPort Express
4. Wi-Fi (802.11a/g/n) network
http://support.apple.com/kb/ht4437 -
I am trying to connect my printer, canon MG3170, it has been connected to the same WIFI network, but I still showing "no airprint printers found". I have tried to restart the printer few times but still the same. Please help, thanks (Dhoni-Singapore)
power everything off printer & router.
re-boot ipad.
Press and hold the Sleep/Wake
button until a red slider appears, then drag the slider. Then press and hold the Sleep/Wake
button until the Apple logo appears. page 128 iPad user manual.
more details on re-booting:
http://ipad.about.com/od/iPad_Guide/ss/How-To-Reboot-Your-iPad-Power-Off.htm
power on router then printer then ipad
Cross your fingers.
Robert -
hello friends.
i am using apple iphone model MB384LL version 3.0.1,am i able to update it with latest version,if yes how may i do that. please help me.
thanksYou will need to update through iTunes on your computer.
-
LR2 and PS Eelements8 show different RGB for the same color - Please, HELP
LR2, Elements 8, Color Chart 24 (CC24),
Please help. I may need to reset LR2 to factory default or to something else.
For the following RAW adjustments the tone curve set to Linear, Contrast and Brightness to 0
I have photographed a CC24 in RAW. Opened image in Elements 8 and adjusted Exposure to 243 for the White patch #19
Then with with WB tool clicked on the 50% Gray and then readjusted exposure for the CC24 listed 243 for #19.
Now all Gray patches #19 through #24 as listed in the table or very close R=G=B (243, 200, 160, 122, 85, 52)
The RGB numbers for Red Patch #15 are R=169, G=58, B=63
The CC24 listed RGB for Red patch #15 are R=175, G=54, B=60
Also saved the adjusted image as JPG
Then opened the image in LR2 and adjusted exposure and WB as described above for Elements 8.
The Gray patches #19 through #24 show RGB numbers as listed in the table or very close.
The RGB numbers for the Red patch #15 are R=138, G=84, B=64.
However the CC24 RGB for Red patch #15 are R=175, G=54, B=60
Exported the image as JPG
Then opened the two saved JPG images in Elements. these two images read almost identical RGB numbers for each patch.
How can I fix LR2 RGB reading. Recently I have saved as defaults the tone curve set to Linear, Contrast and Brightness to 0 and probably did it wrong. My be I need to reset LR2 to the factory defaults to restore its correct reading or something else.
Please help.
LeonidQ1. Is that means that when LR2 Exported RAW to JPG the correct numbers resulted from conversion?
You should be careful with the term RGB numbers. Such numbers are only useful when you know the working space. For example, sRGB, adobeRGB, prophotoRGB, melissaRGB, etc. The numbers I calculated are simply the reference numbers (find them here: http://www.brucelindbloom.com/index.html?ColorCheckerRGB.html ). I recalculated the values in the display space used in Lightroom from Bruce Lindbloom's values in normal prophotoRGB which is a simple arithmetic excercise. When Lightroom exports a jpeg, you can set the color space in the export panel and it will do the conversion for you meaning that it will translate between its internal colorspace and the desired export color space. In an external program, you will usually be working in sRGB, adobeRGB, or prophotoRGB, which are the three main spaces that Lightroom exports to. As you can see from Bruce's tables in the link above the RGB values for these patches in all these spaces are different.
For example RGB for MacBeth CC24 Red patch (#15) was shown as 203, 0, 0 and x-rite RGB is 174, 54, 60.
They are actually the exact same chart. As I say above the values are meaningless if you don't know the colorspace. The first RGB triplet you quote makes no sense at all. It does not correspond to any colorspace listed for the MacBeth chart. The zeros indicate that the color is far outside of the gamut of the used color space, so the value is basically useless. The second is sort of close to the sRGB value.
Q.2 Would it mean that your shown table should not be applied to (used with) x-rite CC24 but to MacBeth only?
They should be pretty good for both as the chart is supposed to be the same.
Q3. Have you created your posted LR table or it was provided by Adobe?
I created it myself. Since you have a colorchecker, you should look into creating a camera profile using it. This can be done with X-rite's excellent passport utility (free download from their website), or with Adobe's free DNG profile Editor. Simply shoot a chart in the right light conditions and run the raw/dng file through this utility and a profile is created that will allow you to get very good color rendering from your camera if you shoot raw. -
i had restore my ipad to ios 7.0.4 but after few days the safari got crashed so i tried to restore it but it asked for icloud account password which i forgot so i erased and restore my ipad again but for activation it asked for the icloud password again please help? thank you
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
jake7832 wrote:
i had restore my ipad to ios 7.0 ... it asked for icloud account password which i forgot so i erased and restore my ipad again but for activation it asked for the icloud password again ...
Without that Password you will not be able to re-activate it.
Removing a device from a previous owner’s account
There is No workaround. -
My Iphone 4s is 2 years and 3 months old. the battery drains very quickly, sometimes turning off once it reaches 40% if I open an app or say the camera.
I charge it more than twice a day now as the battery life is so poor.
Also, when I take a photo, the phot sometimes shows in the album, but if I click on it, it shows up as a white screen and I cannot send the photo either as the recipient gets a blank screen.
I am not super flash with technology, so please be nice!
Thank youBasic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, take the device to Apple for evaluation and possible replacement. -
I tried fixing the problem of not being able to access the card site of pogo.com by following the 'How do I re-install Firefox 3.6.13. But alas the pogo game is still is not loading.
This is my solution, and it didn't come easily. After days of turning myself and my computer inside out, I remembered that AVG (antivirus) installed an update a few days ago and realized that's when my Pogo card games trouble started. So I went and disabled the AVG and checked the games. The games loaded! I went into the AVG settings and was able to revert to the previous version. Now I'll have to rethink AVG, but I can play Pogo games once again! Hope this helps.
-
I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help.
For information about the Other category in the Storage display, see this support article. If the display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
In Photos:
File ▹ Show Recently Deleted ▹ Delete All
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install the app in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C.
For ODS:
security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-
For GP:
security execute-with-privileges /A*/GrandPerspective.app/*/M*/* 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password.
The application window will open behind other open windows. When you scan a volume, the window will eventually show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards
Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver! -
I keep getting the message "unable to verify account information" how do I fix this? It happened out of no where and I tried re-entering the exchange info and it won't stop giving me the message...any ideas?!?
I already reset network settings like someone suggested, but still cannot get my exchange acct to work.I'm having the same problem but with high speed access.
Anyone know the answer?
~Chris -
I just bought an HD movie on iTunes. Yesterday, I watched all but twenty minutes of it on my Dell laptop. Today, I tried to open it on the same laptop, and it told me my computer can't play HD movies, that I have to view it in SD. The error message said that my computer didn't have the capabilities, but I have several other HD movies that I have always and can still watch without issue. Just this one doesn't work. Why, and do you know how to fix this?
Apparently the display is required to be HDCP compatible to view HD movies in iTunes. My display isn't so this is my problem. I contacted Apple support and they have agreed to credit me for the HD movie and I have now downloaded the SD version.
-
I plugged in my macbook pro power adapter and heard a loud bang. I checked the charger by opening it and found out the charger blew the whole mother board up. So i buy another charger, as i live in Egypt, that blew up the same way, please help.
You'll certainly need a new logic board.
If I were you, I would take the machine into your local Apple Store or an AASP and have them evaluate the problems and give you an estimate for repair. If you're out of warranty, be prepared to pay a very high price to get your computer repaired.
Good luck,
Clinton -
I tried to sync an app from my computer to my touch and a window popped up stating that I did not have the proper software for that app. How do I get the software update??
This is the iPhone hardware forum. It sounds like you need to upgrade the version of iOS on your device, though. Plug it in and click check for updates in iTunes.
Maybe you are looking for
-
Error in creation of purchase materials/Goods receipt against PO(FI-MM)
Hi All, While processing FI - MM integration iam facing below errors,request to guide me with same 1) While creation of purchase materials Valuation class 7920 not allowed for material type Raw material Message no. M3180 Diagnosis The combination of
-
I've just hooked my 20" iMac display up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and everything works well, EXCEPT for the green tinge (or hue) that is showing up. Everything else looks pretty good though..... The color that is on my iMa
-
wow, this is taking forever to communicate with anyone, I just want my $4.99 back from the movie rental I paid for. I paid for a rental, we were watching it, had to pause it, accidentally hit 'menu' on the apple remote, tried to get back into the mov
-
OSB SPLIT JOin How to verify it is working parallel
HI , I am using Oracle service Bus 11.1.1.3 and I have following Requirement PS 1 : Receives the request ,validates the input and calls proxyservice 2 (using publish action ) PS 2[Sb ] :Receives the req from Proxyservice 1 queries a DB using the DB D
-
MessageTransformBean endSeparator not working
Hello Experts, I have the scenario ECC--> PI7.11----> MQ. MQ need the flat file instead of XML file. I used MessageTransformBean at receiver JMS adapter. The XML structure is like: <records> <header> <Fileld1> H1</Field1> <Field2>H2</Field2> </header