HT2693 I am getting an 1015 error while updating Iphone 3G with latest iTunes pls help me to restore iPhone 3G
I am getting an 1015 error while updating Iphone 3G with latest iTunes pls help me to restore iPhone 3G
Try this and see if this helps http://support.apple.com/kb/TS3694#error1015
Similar Messages
-
Error while updating Curve 9300 OS to Os6 Pls help!
While I was updating my Blackberry Curve 9300 this notice popped up "An error has occurred while downloading software for your device. Please verify your Internet connection or try again later, if the problem persists." My internet connection is fine and my firewall is not blocking it. What am I doing wrong? Pls help. My device software is 6.0 Bundle 1879
Are you still able to use your device? If so, backup your data then go through the following clean application load: http://bbry.lv/cKy9A0 If you can't use your device, follow the steps in the previous link.
Once reload of the device software is successful, restore your data and test using your BlackBerry. -
Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
Or any other suggestions please? ThanksAs pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.
-
Error while updating time sheet with BAPI_CATIMESHEETMGR_INSERT
Hi Gurus,
We are uploading data from 3rd party software to SAP with Z program.
In this Z program using BAPI_CATIMESHEETMGR_INSERT.
While updating data manually with CAT2 or with BAPI, data is entered properly without any problem but while using the bapi in Z program error message " Version 0 is not set up for controlling area" is coming .
Hence Version 0 is already active for the controlling area for fiscal year 2010.
Please help me to resolve the issue.
Thanks,
Neha Duseja- First - Try to accomplish this via transaction CAT2 (*) (and then CATA or CAT6 to upload data to HR) - You may require some Customizing here ([Entry of Attendances and Absences for HR Time Management|http://help.sap.com/saphelp_bw/helpdata/en/64/400456470211d189720000e8322d00/frameset.htm])
- Then - Use the same values in [BAPI_CATIMESHEETMGR_INSERT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_catimesheetmgr_insert#sdn_content_category_value_wiki]
Regards,
Raymond
(*) Or ask to your functional -
Getting Error while creating Integration server Connection ...PLS help me
Hi everybody,
While creating the Integration server connection I am getting the below error.
Please help me to solve it.
I am using 10.1.3.1 .
Application Server: OK
BPEL Process Manager Server: FAILED
ESB Server: FAILED
Thanks in advance.
RamanaNow i can able to login to my weblogic admin console and find that listen address is blank i have given the listen address as localhost now i can able to create the application server connection successfully ...Listen address blank means your server will accept connections on all network addresses i.e. on localhost, on 127.0.0.1 and on IP/Host name of machine
If you want to access this server from a remote machine as well, then better keep the listen address field as blank OR assign the value of hostname/IP of machine as listen address. In case you set listen address as hostname/IP of machine, server will not listen anymore to localhost or 127.0.0.1
1)Now iam working in local machine so that i am giving localhost .... In case i doing some bpel work in my local machine and after completing the work if want to move to my server ...do i want to change the connectionand give my server hostname ha?If your BPEL server is a remote server then better create a new connection for that (using listen address and port of that server)
How to see errors in Admin server log C:\Oracle\Middleware\user_projects\domains\Soa_base_domain\servers\AdminServer\logs ...is it i want to check it here?Yes, you need to check the logs in this directory in file AdminServer.log
How to check this?Under $Domain_Home/bin (C:\Oracle\Middleware\user_projects\domains\Soa_base_domain\bin), there will be a file setSOADomainEnv.cmd. If you open this file using notepad, you would see a setting like below -
set DEFAULT_MEM_ARGS=-Xms512m -Xmx768mThis setting defines the heap memory.
Regards,
Anuj -
Getting a permission error while updating a field.
hi,
I want to update a field in OIM and push the same to OID. When i try to update it for like 20 times it woks for 18 times and doesnt work for couple of times. I check the log and i get the below error.....
*Caused by: javax.ejb.AccessLocalException: [EJB:010160]Security Violation: User: 'xelsysadm' has insufficient permission to a*
ccess EJB: type=<ejb>, application=Xellerate, module=xlDataObjectBeans.jar, ejb=tcLookupOperations, method=create, methodInte
rface=LocalHome, signature={}.
at weblogic.ejb.container.internal.MethodDescriptor.checkMethodPermissionsLocal(MethodDescriptor.java:573)
at weblogic.ejb.container.internal.StatelessEJBLocalHome.create(StatelessEJBLocalHome.java:60)
at com.thortech.xl.ejb.beans.tcLookupOperations_u50o5o_LocalHomeImpl.create(tcLookupOperations_u50o5o_LocalHomeImpl.j
ava:70)
Kindly help me to fix this.
Thanks
thilakhttp://bbs.archlinux.org/viewtopic.php?id=83076
-
Error while setting the SSL with trusted cert -- any help on this?
Connecting to Node Manager ...
<Aug 3, 2010 5:20:17 PM CDT> <Warning> <Security> <BEA-090542> <Certificate chai
n received from localhost - 127.0.0.1 was not trusted causing SSL handshake fail
ure. Check the certificate chain to determine if it should be trusted or not. If
it should be trusted, then update the client trusted CA configuration to trust
the CA certificate that signed the peer certificate chain. If you are connecting
to a WLS server that is using demo certificates (the default WLS server behavio
r), and you want this client to trust demo certificates, then specify -Dweblogic
.security.TrustKeyStore=DemoTrust on the command line for this client.>
This Exception occurred at Tue Aug 03 17:20:18 CDT 2010.
javax.net.ssl.SSLKeyException: [Security:090542]Certificate chain received from
localhost - 127.0.0.1 was not trusted causing SSL handshake failure. Check the c
ertificate chain to determine if it should be trusted or not. If it should be tr
usted, then update the client trusted CA configuration to trust the CA certifica
te that signed the peer certificate chain. If you are connecting to a WLS server
that is using demo certificates (the default WLS server behavior), and you want
this client to trust demo certificates, then specify -Dweblogic.security.TrustK
eyStore=DemoTrust on the command line for this client.
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireException(Unknow
n Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknow
n Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown
Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown
Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.hand
le(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMes
sage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMes
sages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown S
ource)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Sou
rce)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)Go through this link
http://weblogic-wonders.com/weblogic/2010/03/03/ssl-exceptions-in-admin-server-and-node-manager/ -
HT201210 Problem with iphone 5 updating to ios7 with latest itunes. Error code 4005.
Anyone having issues with iphone 5 and itunes upgrading to ios 7 software. I do not have a phone right now because it will not restore and the phone is stuck on the itune and usb screen. Hard reset does not help. In itunes it will indicate it is "waiting on iphone" and after a few minutes it gives an error message that here is an unkon eroor. Any suggestions?
I had to uninstall itunes, deleted files in my music libary- renamed my itunes music file to tunes. Then installed itunes 10.7. Finally plugged phone back in and restored. Now it is working but what a pain.
-
Error while updating account dim
I get the below error while updating the Outline Account Dim.This error occurs only when updating account dim. It does not happen with other dimensions. So it doesn't seem to be the connection being down. If we recycle the analytics server. But we are not able to find out the actual cause for this issue.
Error message:
Cannot build dimension. Analytic Server Error(1042017): Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again
Additional information
Account is defined as dense dimesion with 1800 level 0 members. We are updating this using rules file.
Potential Number of Data Blocks : 27762609853440
Number of Existing Data Blocks : 2625360
Index Cache: 40960
Data cache : 20480
I appreciate any help in resolving this issueThere is probably something in your dim build source file that Essbase doesn't like and isn't giving you a good error message. Did this dim build work in the past and you recently added something to it?
Try excluding certain columns like member properties and data storage just to see if you can get the members to load. Then slowly bring back in the other columns to see if you find the one that has the problem. Similarly try keeping all the columns but just try loading one record and see if it succeeds, this will help you start to narrow down if it is a load rule or source issue. Other option is to create a new load rule, perhaps there is something wrong with the one you are using.
Unfortunately there is no magic bullet here, you just have to work through small samples to try and isolate what the problem is. -
Error while updating the records through a DB link
Hi ,
I am getting the below error while updating around 15 thousands records, i suspect it to be timeout but not sure.Please can you let me know what solutions needs to be taken.
Not Found
The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
Not Found
The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at htmldb.oraclecorp.com Port 80
Object Type TABLE Object GWB_GRN_GRP_COUNTRIES_LU
Table Column Data Type Length Precision Scale Primary Key Nullable Default Comment
GWB_GRN_GRP_COUNTRIES_LU NAME Varchar2 720 - - - - - -
ALIAS Varchar2 720 - - - - - -
ACTIVE Varchar2 3 - - - - - -
REGION Varchar2 300 - - - - -
1 - 4
Thanks & Regards,
RamuHi Sangu,
See if the following notes help you:
Error when calling API from SQL*Developer, eg. ORA-01403 in API OE_ORDER_PUB.PROCESS_ORDER (Doc ID 1054295.1)
Cancellation Of Transfer Orders Is Not Possible - ORA-01403: no data found in Package OE_Order_PVT Procedure Process_Order (Doc ID 391307.1)
Thanks &
Best Regards, -
Error while updating budget plan for a user in peoplesoft
Hi All,
We are using peopletools 845 and app 8.8 some users are getting this wl error while updating some transactions in PS find the error below,
Message from the ISAPI plugin:
Cannot open TEMP file 'C:\WINDOWS\TEMP\_wl_proxy\_post_8500_4' for POST of 7328 bytes: GetLastError() 5
Build date/time: Oct 25 2004
Change Number: 452998
HTTP/1.1 500 Internal Server Error Connection: close Date: Wed, 10 Jun 2009 16:42:27 GMT Server: Microsoft-IIS/6.0 MicrosoftOfficeWebServer: 5.0_Pub X-Powered-By: ASP.NET Content-Type: text/html
Message from the ISAPI plugin:
Cannot read -1 bytes of postData from tmp file 'C:\WINDOWS\TEMP\_wl_proxy\_post_8500_4': GetLastError() 0
Build date/time: Oct 25 2004
Change Number: 452998
HTTP/1.1 500 Internal Server Error Connection: close Date: Wed, 10 Jun 2009 16:42:27 GMT Server: Microsoft-IIS/6.0 MicrosoftOfficeWebServer: 5.0_Pub X-Powered-By: ASP.NET Content-Type: text/html
Thanks in advance!Hi,
Try having a look at this document
E-WL: Message From the ISAPI Plugin: "Cannot read 8192 bytes of postData from tmp file" [ID 664043.1]
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=664043.1 -
Error while Registering the Database with Catalog..
I m creating recovery catalog in same database, and getting the errors.
1. I have created TOOLS tablespace
2.CREATE USER RMAN2
SQL> CREATE USER rman IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4 QUOTA UNLIMITED ON tools;
CREATE USER rman IDENTIFIED BY cat
ERROR at line 1:
ORA-01920: user name 'RMAN' conflicts with another user or role name
SQL> ed
Wrote file afiedt.buf
1 CREATE USER rman2 IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4* QUOTA UNLIMITED ON tools
SQL> /
User created.
3. GRANT RECOVERY_CATALOG_OWNER
SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
Grant succeeded.
4. To create the recovery catalog:
1. Connect to the database that will contain the catalog as the catalog owner.
H:\>rman catalog rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to recovery catalog database
2. Run the CREATE CATALOG command to create the catalog.
RMAN> CREATE CATALOG;
recovery catalog created
3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
H:\>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: rman2/cat
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select count(*) from cat;
COUNT(*)
91
SQL> ed
Wrote file afiedt.buf
1 select owner, table_name, tablespace_name
2 from dba_tables
3* where table_name='DB'
SQL> /
OWNER TABLE_NAME
TABLESPACE_NAME
RMAN2 DB
TOOLS
RMAN DB
ABAMCO_TEST
Next step is to registering the Database in the Recovery Catalog.
Registering a Database in the Recovery Catalog
H:\>rman TARGET / CATALOG rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
I m getting above error while registering the Database with Catalog,
Can anybody help me how can I register the Database with Catalog.????
Waiting for Reply!!!!!!!Dear Manoj I can log in at TARGET Database.
H:\>rman
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target sys/rock
connected to target database: ROCK (DBID=3255117147)
RMAN>
============================================================
USING CONNECT STRING as you said.
H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
Argument Value Description
target quoted-string connect-string for target database
catalog quoted-string connect-string for recovery catalog
nocatalog none if specified, then no recovery catalog
cmdfile quoted-string name of input command file
log quoted-string name of output message log file
trace quoted-string name of output debugging message log file
append none if specified, log is opened in append mode
debug optional-args activate debugging
msgno none show RMAN-nnnn prefix for all messages
send quoted-string send a command to the media manager
pipe string building block for pipe names
timeout integer number of seconds to wait for pipe input
checksyntax none check the command file for syntax errors
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00552: syntax error in command line arguments
RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
RMAN-01007: at line 0 column 16 file: command line arguments
H:\>rman
It didnt work either.
I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog. -
"Error while updating" message
Hi all,
I've been using ical between two computers, and the dot mac service, and for one of my calendars, I get the little icon with a broadcast like symbol, but it has a red circle with an exclamation point in it.
When I click on the icon, I get the message:
"Error while updating. Server is currently unreachable or its name (ical.mac.com) is invalid."
This first occurred when I made calendar changes while I was offline. When I went online, all the other calendars synched just fine.
Any ideas on how to get this icon back to normal?
Thanks,
BorisHi,
From your description, you have a list with Hyperlink/Picture column. When you change the Standard View to Datasheet View and perform bulk upload, the error occurs when there
are .jpg files.
I tried to reproduce via UI or code, all worked as expected.
Can this error occur if you upload the .jpg files in Standard View?
What if you upload one single .jpg file to this list in Datasheet View?
If the issue still exists, I suggest you do the same test on another clean list in case it is a list issue.
Feel free to reply with the test result if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support -
Error while updating Group Policy
Hello All,
I get the below error while updating the group policy on the user machin.
C:\Users\905288>gpupdate /force
Updating Policy...
User Policy update has completed successfully.
The following warnings were encountered during user policy processing:
Windows failed to apply the Internet Explorer Zonemapping settings. Internet Exp
lorer Zonemapping settings might have its own log file. Please click on the "Mor
e information" link.
Computer Policy update has completed successfully.
For more detailed information, review the event log or run GPRESULT /H GPReport.
html from the command line to access information about Group Policy results.
Is there a way I can find which group policy is causing this issue?> Do you want me to give you those site details as well?
Hm - not really, I have no error with zone assignments. It's you with
the error :)
Verify your site entries against
http://support.microsoft.com/kb/184456
- most probably, some of them do not adhere to the allowed wildcard rules.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Error while updating EP6.0 from SP09 to SP27
Hi All,
I am getting the following error while updating the Enterprise portal 6.0 from SP09 to SP27.
WARNING 2011-05-19 16:50:09
CJSlibModule::writeWarning_impl()
Execution of the command "C:\j2sdk1.4.2_13-x64/bin/java.exe '-classpath' 'C:\Program Files\sapinst_instdir\PATCH\ORA/install/sharedlib/launcher.jar;.' '-Xmx512m' 'com.sap.engine.offline.OfflineToolStart' 'com.sap.engine.configtool.batch.BatchConfig' 'C:\Program Files\sapinst_instdir\PATCH\ORA/install/lib;C:\Program Files\sapinst_instdir\PATCH\ORA/install/sharedlib' 'C:\Program Files\sapinst_instdir\PATCH\ORA/getSafeMode.xml'" finished with return code 31415. Output:
Can not get DB connection. Batchconfig will only be able to execute offline tasks.
ERROR 2011-05-19 16:50:09
CJSlibModule::writeError_impl()
CJS-20076 Error while retrieving the mode of the Java engine. SOLUTION: See output of logfile C:\Program Files\sapinst_instdir\PATCH\ORA/getEngineMode.log: 'Can not get DB connection. Batchconfig will only be able to execute offline tasks.
TRACE [iaxxejsbas.hpp:384]
handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
ERROR 2011-05-19 16:50:09
CJSlibModule::writeError_impl()
CJS-20076 Error while retrieving the mode of the Java engine. SOLUTION: See output of logfile C:\Program Files\sapinst_instdir\PATCH\ORA/getEngineMode.log: 'Can not get DB connection. Batchconfig will only be able to execute offline tasks.
Please hel me to resolve this issue.
Regards
Karthik Ravoori> Execution of the command "C:\j2sdk1.4.2_13-x64/bin/java.exe '-classpath' 'C:\Program Files\sapinst_instdir\PATCH\ORA/install/sharedlib/launcher.jar;.' '-Xmx512m' 'com.sap.engine.offline.OfflineToolStart' 'com.sap.engine.configtool.batch.BatchConfig' 'C:\Program Files\sapinst_instdir\PATCH\ORA/install/lib;C:\Program Files\sapinst_instdir\PATCH\ORA/install/sharedlib' 'C:\Program Files\sapinst_instdir\PATCH\ORA/getSafeMode.xml'" finished with return code 31415. Output:
> Can not get DB connection. Batchconfig will only be able to execute offline tasks.
You'r JDK is really old, AFAIK the first one officially released for x86_64 on Windows was 1.4.2_17. I suggest you upgrade your JDK ot the latest one (1.4.2_30) and try again.
Markus
Maybe you are looking for
-
Zen Vision:M Warranty questi
I got a ZVM (30 GB) and the extended one year 2 years of coverage. If my HDD fails in a year and a half, what will happen? I'm assuming there will be some costs like shipping, but will I get a new ZVM? Or will they just fix it's What if a newer playe
-
Phone support sends me to chat chat doesn't respond. How do I get the software registered. I have 2 other copies of acrobat pro that registered previously w/o problem I also registered Dream Weaver w/o problem. In the past when I needed customer serv
-
Manual photo placement contact sheet
Using iPhoto, I am trying to print a contact sheet with the photos in a specific order. I have them in an album and I arranged them as I want them printed. Upon printing to PDF, the images scramble. I have tried, but without success, the following:
-
import java.io.*; import java.io.File; import java.io.FilenameFilter; public class FileDetect { public static void main(String args[]) { File f=new File("f:/"); if(f.exists()) { for (File file : f.listFiles()) { File[] files = f.listFiles(new FileFil
-
I'm struggling with using the search and replace patter to replace a number of substring matches within a string, can anyone help and tell me what am I doing worng? Not an expert in regexps I'm basically trying to replace all the matches for "NONE","