HT2822 apple tv just says date and time will not connect press menu button on remote,dose nothing then goes to screen saver shots of animails

First time connecting apple tv just says date and time will not connect press menu button on remote,dose nothing then goes to screen saver shots of animails

Read this: http://appletv2.com/stuck-on-setting-date-and-time-fix/

Similar Messages

  • My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

    My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

    Howdy eewebe13,
    So you have no cellular service but are on Wi-Fi yet iMessage and Facetime are waiting for activation.
    Please step through this article for that scenario.
    If you get an error when trying to activate iMessage or FaceTime - Apple Support
    Thank you for visiting Apple Support Communities.
    Nubz

  • The date and time will not set why?

    It keeps saying selecting date and time but never does. I tried signing in with my apple ID and it says to set date and time first and the only thing it lets me select is state.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
        1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
        2.    Also try restarting the router.
        3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Date and Time Will not change the Month

    In my System Preferences I can not highlight or change the month from "1" in any manner. This is consistent throughout the system for iTunes (last played), iCal, Finder, etc. a file saved today would be saved as 2008.1.18 as consistent with my layout preferences, but not the actual date. However, in the expanded view, it still will read as May 18th, 2008. Any ideas? Currently I'm in Israel and there aren't any Genius Bars around here, but if not, I'll try in August, in NY

    I can't say if Lion has the ability to fix itself, however, I've been useing it since the day it was released and a few bugs it had at first went away after a few days on their own.  As far as setting the Date & Time on AppleTV and the other WiFi issues I was having after updating to 10.7.1 (which I felt were huge, persistent, and unacceptable), everything is functioning properly now.  The only change I made was this: I made sure that I had a connected WiFi connection using the Airport Utility and Network Preferences via System Preferences and then I locked the Network Preferences to prevent further changes.  I can't say for sure if that was all that was needed, but AppleTV, WiFi, and Home Sharing are once again operating correctly and usable.

  • Just activated ipod touch and it will not connect to app store or internet

    need help!  Got my daughter an ipod touch for christmas just activated it and it will not connect to app store but it connected to wifi

    Do you have a goog wifi connection? Are you getting an error message?
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • TS1398 I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.

  • Entourage Calendar Events: Dates and times are not being saved accurately

    After an event has been created and saved, the date and time will change pushing the event forward, but not consistently. Some events jump forward a few hours others an entire day or more. I've been using this program for many years without fault but this problem started several days ago after a recent automated software update. It is not only happening with newly created events, it has also altered events saved weeks ago! (note: time zone is set accurately in the System Preferences and Entourage)

    I would check Microsoft's Entourage 2004 forum to see if others have experienced the same issue. Entourage 2004 has been replaced with Entourage 2008 awhile back. It may be those issues are fixed with 2008 and will never be in 2004, or you may need a later patch for 2004. If the automated software update was Microsoft's I'd contact Microsoft, if it was Apple's, this may just be a sign you need to upgrade your Microsoft to keep up with Apple. Whenever you do a system level software update you always need to verify compatibility bugs don't exist with the newer system when you are talking about other third party software. There are way too many third party software titles out there new and old for Apple to test with its own system given the time frame people desire updates.

  • Get date AND time to show in the menu bar

    What is that technique to get date AND time to show in the menu bar please?

    Install iStat Menu
    System Preferences -> iStat Menus -> Date & Time
    \[X] Show Date & Time
    Format .... \[Edit]
    (*) Custom (drag tokens to build a custom format)
    Drag a light blue token into the edit line below the token selections. If you want a space a colon a dash, etc... just type that character(s) before after draging a token into place.
    I created: 9:35 PM Sat 1-Aug-2009
    You can create anything you like in any order you like.
    The other alternative (if you happen to be a fan of the Unix strftime() function) would be to use the % formatting characters in the Expert time format expression box. Use the Terminal "man strftime" to find out all the available % formatting codes.
    But I think the Custom Drag & Drop section is the easiest to use.
    However, if this doesn't work for you, then I guess it is just a case of "Your Mileage May Vary".

  • The setting date and time is not working

    Bought an apple TV, installed it as per instruction, connected to my internet but the seting date  and time is not occuring and the activation cannot occur either.  Spent 1 hr on the phone with Apple support staff - they told me it may be a router blockage and to contact my internet provider.  contacted internet provider , they tell me everything is working from their end so must be the apple TV device.  I was told this was easy techonology and that I would not have issues - I have spent 3 hrs on this and truly frustrated as its not working .  any suggestions would help!

    That would be a network issue as you were initially advised. When the date and time can not be set it means it is having trouble connecting to the network.
    Make sure router is up to date, reboot router and ATV. Make sure location is set correctly via ATV and also DNS (settings - general - network - configure DNS - automatic)
    Make sure your router allows access over port 123.
    Failing that try a restore on the unit

  • Date and time inidacator not showing up

    I have recorded on mini DV tape with the date and time indicator on, but when I try to log and capture it into FCP for editing, the date and time is not there. I'm sure it's on the tape as I have played it back on several several different tvs and monitors, but for some reason I can't get FCP to read it.
    Please advise if you can.
    Chorine
    G 4   Mac OS X (10.4.8)  

    Playing back the tape in the camcorder that originally recorded the tape with the display output activated, doesn't mean that you actually recorded the date & time as part of the video. Check the user's manual of your camcorder to find out how to record date & time as part of the image - not just to a data track. FCP doesn't access the data code info.
    -DH

  • I just bought a time capsule and it will not connect to preexisting home WiFi.

    I just bought a time capsule and it will not connect to preexisting home WiFi.  The Airport Utility recognizes one of my neighbors networks but not mine.  I have ATT&T U-verse.  I understand I can use the Airport time capsule as a router but would prefer to use it in my existing network

    tallswag wrote:
    I have a similar hookup, I have a Airport Extreme & Time Capsule. I would like to connect my Extreme to the Time Capsule "6th gen". I would also like to use the LAN ports on the Extreme. Can this connection be done wirelessly or wired? I'm using a Mac Tower that does't have a wireless card if that's important. 
    As long as you have two apple routers then it is up to you which way you do it.
    You can connect them by ethernet and use it setup as roaming network.. for wireless.. it will simply be bridged on the router side. Ethernet is much the faster solution.
    But if you want to use wireless link that is also fine if the range is not too great. Then ethernet to the computer.. so you effectively have a wireless bridge...
    so, Cablemodem----Airport Extreme- - - - - - - -wireless link- - - - - Time Capsule------computer
    Where the more solid lines are ethernet.. that is possible setup. And using the TC directly on ethernet to the computer will keep your backup speed good while also giving you hopefully your full internet speed so that works well.

  • I just reinstalled iTunes, and it will not open, as it says iTunes library itl. was created from an earlier version. Any idea what this means, and how I can get itunes to open?

    I just reinstalled iTunes, and it will not open, as it says iTunes library itl. was created from an earlier version. Any idea what this means, and how I can get itunes to open?

    Many thanks.
    That suggests that another application has stashed old QuickTime componentry in your system files.
    So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    If you have a 32-bit version of Windows, open the "System32" folder.
    If you have a 64-bit version of Windows, open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • The date and time is not working after setting it to current date and goes back to may,26 2011

    the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th

    On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar).  Also make sure your date and time on your computer is correct as well as the Time Zones on both.

  • Why date and time do not show as links in some email message in 4s?

    why date and time do not show as links in some email message in 4s?

    To add it back, tap the Edit button at the top of the list of mailboxes and select the missing email account so that it has a tick against it (you can also change their order in the list by dragging the parallel line icon to an account's right), tapping Done should then get it to show in the list

  • My apple tv just updated to 6.0.1 .. now my iphones and ipad will not connect and airplay :(   .. HELP

    my apple tv just updated to 6.0.1 .. now my iphones and ipad will not connect and airplay    .. HELP

    Troubleshooting AirPlay

Maybe you are looking for

  • Email Address not picked in email activity

        Hello, We are trying to create a outbound email w.r.t Lead (BP has Email address) , now in the outbound email TO field is not populated with Email address of the BP , we have maintained copy control between lead and Outbound email activity too. A

  • Intercompany EDI processing

    Hi, Dear all in my inter company I assigned out put type RD04 and partner profile is maintain for both outbound and inbound processing when I save then it process properly and give IDOC number But when try to check status with WE02 it shows error as

  • Another PPC/Intel node question!!!

    Hi MacAddicts, I've searched the forum but didn't get an answer about this. I want to connect a PowerBook(host)to an Intel Mac mini as the node(the poor man's HD setup!!). I'm on LP 7.1.1 on Panther. Can i install the node app. from 7.1.1 on the inte

  • Plsql block cursors

    Hi, I have a member procedure calc_discount in a type body of a subtype. this procedure takes in a parameter id and calculates the discount that the particular satff member has based on their years in service. I'm trying to create a pl/sql block that

  • ITunes app window opens same location every time

    Just started doing this. I move the window to Desktop 2 and quit. Then when I reopen, it goes back to Desktop 1 in the same location it opened last time. Isn't this window info in the application .plist file? Also, the Dock no longer has the option t