HT3053 Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?

Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?
My battery got swollen (and I unfortunately noticed it very late and might have be running with it for months, which potentially explains all the crashes everyday and the trackpad not working anymore, the Apple test also says I have a bar of ram broken...) and I had to remove it because the back pannel did not close anymore... Can I still use my MBP normally forever that way? I was planning on buying a new mac anyway but maybe waiting for the next iMac upgrade in the year... Should I wait?

Other than the system shutting down instantly if you have a power outage, whcih could corrupt the OS. Nothing else bad will happen.

Similar Messages

  • Hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive?

    hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive? please help for i only have around 618mb left out of 189GB!!!!!!!!!!!!!!!!

    If what doesn't work?
    If cloning your internal drive to the external drive is not successful, I expect CCC will tell you so. Assuming that doesn't happen, you will have a bootable replica of the internal drive on the external drive once CCC has finished.
    You can then do any of several things:
    1. Replace your internal drive with a much larger one (320GB or 500GB, or even larger), and clone the external drive's contents onto the new drive so you'll have all your data in one place. Note that if you do this, you'll also need to buy an external drive that's large enough to back the new internal drive up on.
    2. Boot from the external drive as a temporary measure while you clear at least 30-40GB of data off the internal drive, allowing you to keep using it and saving small amounts of data to it. The external drive will then contain the only copies of the files you've deleted from the internal drive, so you'll need a seond external drive large enough to back both the other drives up on.
    If you can't comfortably clear a minimum of 30GB off the internal drive, you really need a larger internal drive right now, and you shouldn't bother fooling around with the inadequate one you have — you'll just quickly overfill it again.
    3. Replace the optical drive in your MBP with a large conventional hard drive, giving you two hard drives inside the machine. You will then need one or more external drives large enough to back up both of the internal drives.
    If you sense a theme here — back up, back up, back up — you are correct. It's flat-out foolhardy to own or use a computer without maintaining complete, up-to-date backups of everything at all times.

  • MacBook Pro (Late 2008) won't start up

    Since December 2012, my MacBook Pro (late 2008) refuses start up. After trying many, many things (from online forums - nothing worked), the solution I found by hit and miss is to heat up the back of the laptop in front of my fireplace (or with a hair dryer), to remove the battery, to wait a few seconds and then to put it back in; after doing this, it turns on without a fuss and remains in perfect running condition until I turn it off again. I now leave it on 24/7 when at home, and I don't dare taking it away with me again... Seems to me a contact got loose and the heat expands it just enough to make it work again. Manufacturing problem?
    Has anybody else got the same or a similar problem? I hope to fix this without going to an Apple store if possible, as it's not under warranty any more...
    By the way, I have since replaced the battery and the hard disk, but that particular problem remains; I'm running OS X 10.8.2.

    It coule be one of two things:
    1) Your hard drive has become corrupted, and you'll have to reinstall the OS and cut your losses.
    2) Your logic board is fried. I seriously hope that this isn't the problem, but if it is, then it's time for a new mac.
    My macbook pro was stuck on a bootup loop, and I finally had to reinstall the OS. This fixed my problem. On the other hand, I had this same problem on my iMac, and an OS reinstall didn't do anything.
    Before making any judgements, take it to the genius bar and get some expert advice.

  • Not able to install Win7 on OS Mavericks Macbook Pro (late 2008)

    Hi folks,
    since yesterday I'm trying hard to install Windows 7 on my Macbook Pro (late 2008) without any success.
    I put the .ISO file for installing Windows on my USB stick. When I started Boot Camp Assistant 5 it says either "the installer disc could not be found" or if I check "Download the latest Windows support software from Apple" it says after few seconds "Can't install the the software because it is not currently available from the Software Update server."
    Can anybody help me, please?!
    Cheers

    You can only install Windows from a USB drive on a Mac that came without a DVD drive. Your Mac came with a DVD drive, so you have to install Windows from a DVD.
    I do not recommend you to download the Windows support software from Boot Camp Assistant. Instead, I recommend you to download it from the Apple site > http://support.apple.com/kb/DL1630
    Follow Apple's steps to install Windows > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

  • I have a MacBook Pro late 2008 edition with 2 Gigs of RAM and running Mavericks. When trying to download Yosemite from the App Store it gives me an error message. Anyone has a similar problem?

    MacBook Pro late 2008 edition with 2 Gigs of RAM and running Mavericks (10.9.5). It gives me an error message when I try to download Yosemite

    All,
    I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
    Thanks,
    Clif Bridegum

  • MacBook Pro (Late) 2008 running 10.8.4 Have a Black Screen cannot get out of sleep mode/will reboot/will sound off at restart.

    MacBook Pro (Late) 2008 running 10.8.4
    I was using my computer every morning as I do everyday with no issues. I had left home for most of the day. Closed lid and while I was gone for a couple of hours. I returned home, opened my MacBook and nothing but a black screen. I've tried many things all evening try and fix this problem out of "safety sleep mode, and other similiar tricks that other people had tried.
    I still have a Black Screen and cannot get my macbook out of what seems to be the sleep mode.
    I've done a master reset and after I restart, I do get the power up chime but still a black screen. I don't know what else to do. Please help. Should I bring computer to a local repair shop or is there something I can do to fix myself. I just don't know where to start.
    Thank you.
    Susan

    Genius reservation http://www.apple.com/retail/geniusbar/
    on-line https://getsupport.apple.com/GetproductgroupList.action
    check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Macbook pro late 2008 13 inch won't run 8 gb ram

    Hello, I have a question that has been bothering me for a while now.
    I bought a 4gb Ram Module at best buy, it is 1066GhZ DDR3 SODIM.H from PNY to upgrade my macbook pro to 8gb of RAM, everything was going well, I got home and opened up my macbook, inserted the module and turned on my mac.
    Everything started working fine until I tried to open google chrome, my machine went into a kernel panic and restarted itself.
    Being as I am, I decided to wipe my machine and re-install mountain lion (I run it because mavericks slows down my computer) but my machine wouldn't let me install it.
    I opened my computer up again, re-installed the 1gb module from the fabric and the computer worked well.
    Now, my question is this: Isn't my computer able to run 8 gb in RAM? I already upgraded my firmware and read a bunch about it on the internet and have done everything necessary but my computer won't accept the module!!
    I really would like to know what is going on :/
    My specs:
    Macbook pro late 2008 unibody
    Version 10.8.5
    H2.4 GHZ Intel core 2 duo processor
    5 gb 1067 MHz DDR3 memory
    Model Identifier: MacBook5,1
    Boot ROM Version: MB51.007D.B03

    According to http://mactracker.ca database (free download) the MacBook Pro
    13-inch model identifier5.1 you've stated that you have, is Not as you've said.
    However, there was a 15-inch with the 5.1 model identifier.
    •How to identify MacBook Pro models
    Be sure to correctly identify the MacBook Pro model, and then get high quality
    RAM of proper specification of known good brand for Apple portables.
    Find an Example of correct spec RAM, by model & identifier; display size, build year:
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade
    The budget name brands seldom work well in Apple products; they do OK in some
    models of old computers or loose-spec PCs. OWC/macsales and crucial.com are
    two better known reputable suppliers of upgrade parts for Macs. Be sure to match
    the correct part to the exact spec for your computer.
    •How to identify MacBook models
    •The MacBook 13-inch (Aluminum Late 2008) -- is not a MacBook Pro:
    Model Identifier    MacBook5,1
    Model Number    A1278
    EMC    2254
    As such the RAM spec according to MacTracker is as follows:
    Maximum Memory    8.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots    2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
    OWC site points to this page for RAM. Double check detailed specs:
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3
    Good luck & happy computing!
    edited 2x

  • I did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

    i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

    That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
    You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
    If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy.

  • How can i Flash and restore the firmware ( EFI ) from a Macbook pro ( late 2008 , 5.1 ) ??

    How can i Flash and restore the firmware ( EFI ) from a Macbook pro ( late 2008 , 5.1 ) ??
    Please help me !!

    The Seagate backup drive I bought doesn't support 10.5.8
    The only reason I can see for that is it's formatted NTFS, which would likely be Read Only in 10.5.x, if you can reformat it MacOS extended, which would erase everything on it now, then that should work for your purposes.

  • Macbook pro late 2008 update to osx mountain lion already but can't open safari

    macbook pro late 2008 update to osx mountain lion already but can't open safari

    Where did you buy this "open box" MacBook Pro?
    Here are the specifics on the upgrade program:
    http://www.apple.com/osx/uptodate/

  • HT201343 how can i use airplay in my MacBook Pro late 2008?

    Somebody can tell me how can i use AirPlay on my MacBook Pro late 2008?

    On your MacBook: Apple Menu > System Preferences > iCloud > place a checkmark in front of Contacts
    On your iPhone: Settings > iCloud > turn Contacts to on

  • MacBook Pro Late-2008 Battery Can't Keep a Charge.

    I understand I bought my MacBook Pro Late-2008 just before they upgraded the MacBook batteries; it's never held a good charge, so I've had to keep it plugged in. Lately I've been finding myself needing it when outlets might not be readily available.
    After I remove the power cord, it doesn't stay charged for more than 3 minutes, 30 seconds (I've timed it more than once). Even with its age, this seems like a significant problem with the battery.
    I'm really not sure it's worth it to spend $130 on a replacement battery, and I'm not in a position to simply get a new MacBook.
    Are those third-party batteries actually legit? Is there a chance that an Apple Store might be able to take care of it? I'm well past the life of my Apple Care, obviously, but three minutes for the battery?
    What is my best option? Or just suck it up and deal with having to find an outlet wherever I go?
    Thanks.

    There are many third party batteries that are at best suspect.  I have seen on Amazon what appear to be legitimate OEM Apple batteries which I suspect are graymarket products.  You may try that at your own risk.  If you purchase from Apple. you will know what you will be getting and with a warranty.
    Ciao.
    OWC has what appears to be a battery that will fit your MBP.  They are a reputable vendor for Mac compatible products,
    http://eshop.macsales.com/item/NewerTech/BAP15MBU54RS/
    Message was edited by: OGELTHORPE

  • Can I use my old Macbook Pro Ram in the New Macbook Pro (late 2008)

    I have 2, 2 gig DDR2 sticks of ram in my macbook pro. I wanted to know if they would work in the new macbook pro (late 2008)? I know the new one uses DDR3 - What would be the downside of using DDR2 in a DDR3 macbook? Would the graphics cards work to their potential? Thanks!

    No. The DDR2 RAM in your older computer is not the same as the DDR3 RAM used in the new ones. There are significant differences between them not the least of which is pin count.

  • Macbook Pro Late 2008 Boot Issue

    Hello All!
    So I have an issue i would like to throw into the ring and see if I get any responses I have not thought of yet. Let me give you a quick backstory to my recent macbook adventures.... I will start with a quick prelude story.
    Chapter One:
    Purchased a used Macbook Pro, Late 2008 2.53ghz, 4gb DDR3 ram with no charger off ebay. And yes, I should know better. But honestly, it only had a cracked screen but still worked perfectly connected to an external monitor and i could not pass on the price of it.
    Chapter Two:
    After recieving my purchase, I determined that it was just a cracked cover over the LCD screen which is easily replaced, but the backlight was out on the LCD. So i ordered a new LCD. The new LCD did not fix my issue, which then pointed me to a problem on the motherboard. I then sent it out and had it repaired.
    Chapter Three:
    Upon recieving my newly repaired macbook, I installed a new SSD drive, battery and replaced the screen cover for the newly installed LCD. It looks Fantastic if I do say so myself! I then proceded to install lion and I have a perfect running Macbook Pro for less than 700 bucks after all was said and done.
    Chapter Four:
    Now, at this point you should know why I bought it... I use it for djing. That is it. There is nothing else on this. No apps, programs, or scripts. It has an updated lion OS on it and my serato itch Djing software. There isnt even any music on it as i store that on an external 3T WD elements drive. (I only installed an 80gb SSD for the OS system). Unfortunately i have had some instances where the Mac Pro has just shut down completely while im spinning! Not good for business!
    Chapter Five:
    Over the course of the last year I have noticed some things happening. Longer than normal boot times (especially since it has an SSD in it this seems wierd to me) and crashing of the Itch software while trying to analyze music or just not closing itch at all when im done playing a show and having to press and hold the power button to turn off the mac. Now for the kicker... Unbeknowst to me, apparently you cant use a 65W charger on a macbook that requires an 85W charger, this i just recently learned. The charger i was using was a 65W from a white 13 inch macbook 2006. I just recently aquired the 85W charger.
    This brings us to the present.....
    Here is the issue. I was analyzing my music files using itch, when suddenly & randomly one of the 2 analyzing indicators would just stop analyzing the track it was on... This leaves only one analyzer bar going and the other just stuck where it is (16000 songs will take awhile with only one analyzer going). If i stop analyzing and restart it, it picks up where it left off and continues for a bit and stops again, but its never the same track or same length of time before it stops analyzing. Now I have tried this with both Lion and Snow Leopard (the white macbook 2006 has snow) and it appears to happen with either OS.
    So I decided to install Snow on my Mac Pro 2008. For some reason, and I dont know why, it would not let me install snow to the partion I made on the drive. The disc would just keep rebooting the Mac pro over and over again. I know for a fact that snow works because I took the drive out of the white Macbook 2006 and put it into the Mac Pro 2008. Booted right up.
    So, I have re-installed itch on lion... Still has the same problem with lion.
    I have restored a copy of snow to the partioned hard drive of my Mac Pro 2008 from my white macbook 2006. This seems to be the only way to do this if i want snow on my Mac Pro 2008 since it won't boot Snow from disc or USB. Installed a new copy of itch, still the same problem.
    So my question is this.... Is it hardware or software?
    And to stop those from putting the obvious, I have done all the PVRAM, SMC etc resets!! I am not some 12yr old trying to make daddys computer work again because i used it like i shouldn't have. Im looking for something besides the obvious!
    Sorry, but I felt the entire story needed to be told in order to get the responses I'm looking for....
    And thanks for taking the time to read about my issues! Hopefully someone can point me in the direction I need to go to get this to stop doing what it's doing. I will be more than happy to answer any and all questions concerning this issue as best I can.

    The heat generated may be a function of what you are doing on the Internet.   Watching videos will stress the CPU/GPU and create heat and result in faster fan speeds.
    First try a SMC and PRAM resets:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/PH14222?viewlocale=en_US
    If there is no change, post back.
    Ciao

  • Random hard freezing issues, Windows 8 64-bit on Macbook Pro (Late 2008)

    Hi,
    I recently upgraded to OS X 10.8.3 and got a hold on copy of Windows 8 64-bit. As I'm running on my old trustworthy 15 inch Macbook Pro (Late 2008), my hardware is officially unsupported. Over the years I've had XP, Vista, Win7 32-bit and 64-bit running running on the same machine, and thought I'd give Win8 a chance.
    To be able to install Win8 on my unsupported hardware, I tricked the Bootcamp assistant that I was going to install Win7, and after the reboot and start of the Win7 installation, I exited the installer, rebooted, switched DVD to Win8 and did the installation from there. So far so good. For installing the Bootcamp drivers, I followed the instructions in https://discussions.apple.com/thread/4894920?tstart=90.
    Now, the machine runs just fine with Windows 8, and I've installed some basic third party applications (Firefox, Spotify, Steam). However, I get completely random hard freezes on the machine (sound looping, no other activity whatsoever) during normal use. These can occur 20 minutes after start, or 3-4 hours in. The freezing behavior is very much similar to how my model can behave under overheating conditions (which mostly have occured in past Windows versions while gaming), however overheating doesn't seem to be the issue here (based on simple palpation ).
    Have anyone experienced a similar problem, or know something about it? My current idea is that some weird things are going on with the Bootcamp drivers, so unless anyone comes up with a suggestion I might try doing a rollback to the point before I installed the drivers to see what I can make of it.
    Thanks!

    Had a few similar short system freezes, after installing Windows 8 x64 on 13” MacBook Pro Mid-2010 with BootCamp 5.0.5033.
    There is a suggestion that DisableDynamicTick may fix the problem: https://discussions.apple.com/message/21565295#21565295. There were similar topics at Microsoft forums: 1, 2, 3. It was said “that this will likely reduce system battery life, so it should be undone when you update your Windows build or if it doesn't resolve your issue”, and that “this problem is resolved in the release versions of Windows 8”.
    Another possibility is that there is indeed a buggy driver, within BootCamp 5.0.5033, or a 3rd party, like a wireless network driver in the following case http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/system-fr eeze-randomly-after-installing-windows-8/49488183-26cf-4389-af21-a85dc366c99a?pa ge=2#LastReply.
    The problem has been noticeable on my MacBook, but not annoying enough yet to spend time troubleshooting. If you find a robust solution, using the links above or other method, it would be interesting to know.
    HTH

Maybe you are looking for

  • MacMini to iMac 27" Display

    Can I connect an older Mac Mini (approx 2007) to a new iMac 27" display - I am about to purchase one but in doing so will be removing the PC/LCD monitor... So what options do I have or is this a non-starter?

  • Video quality on of pictures on Computer vs TV

    I know this topic has been discussed and debated but I need to clarify a few things. Basically the DVD I have produced from photos dragged into iDVD has been very good when viewed on a 29 in TV. However, when viewed on a 15in Powerbook it looks terri

  • Why does my mac book air just shut down when working

    When using my mac book air it just shuts down. I usually need to tap several keys to restart.  Any help?

  • BEx broadcaster precalculation variable value shows BEx web analyser iview

    Hi Experts, I'm getting this very weird problem on BEx Broadcaster in BI production portal. In BEx Broadcaster, the general precalculation tab, variable value create /change link when clicked show BEx Web Analyser iview instead of variable entry scre

  • Always Have to Force Mount My iPod

    I bought a 30gb video iPod about 2 weeks ago. From day one I've had to force mount (hold down menu and select) the iPod every time I connect it to my Mac. Here's my daily procedure for connecting my iPod: 1) Plug it into the Mac via the USB cable 2)