HT3176 my apple remote will not link to my appletv even after changing the battery

my apple remote will not link to my appletv even after changing the battery.  can anyone help?

Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Similar Messages

  • Help!!!!!! my iPod touch nd gen will not turn on at all even after charging it for 2 days straight what's wrong???

    Help!!!!!! my iPod touch nd gen will not turn on at all even after charging it for 2 days straight what's wrong???

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

    while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

    Hi there aliyan,
    I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below. 
    If you see 'No SIM' alert on iPhone
    -Griff W.

  • After changing the battery in my iphone 4s, the phone will not boot up. I only see the apple and when it sits for a few minutes, a code shows above it. What is going on? Did I damage the phone by replacing the battery?

    My sister gave me her iphone 4s for my son. It needed a new battery so, I bought one and replaced it. after doing so, it will not power up. I can only see the apple on the screen and when left for a few minutes.... 10 lines of numbers and codes show up at the top of the screen. Did I ruin the iphone by replacing the battery? Was a simple switch so I don't understand what is going on. Have never had one of these before.

    iPhones are not user servicable.
    Take the device to a competent repair person or buy a new one.

  • I can not get my mouse to work after changing the batteries

    I can not get my wireless mouse to work after changing the batteries

    Some ‘dumb’ questions just so we don’t assume what you have done:
    Batteries installed with both + poles pointing to the top as you hold the mouse?
    Mouse switch has been returned to the ‘on’ position - do you see a green light?  First it will be solid green and then flashing green as the mouse tries to pair with the computer.
    Try clicking the mouse a few times as it’s trying to pair.
    If you don’t see a green light, try wiping off all battery contacts and reinserting the batteries.  If still no green light and the mouse switch is ‘on’, are these old rechargeable batteries that been recharged many times or are they fresh normal batteries (not rechargeable batteries)?

  • Films - Movies not Working or corrupted in iTunes after changing the  album artwork

    After trying to change the album artwork for some movies I own, I realized that such movie unplayable after such change and I cannot even revert what I have done. More, it seems like if you press on the "get info" section of the movie, you will notice that the artwork tab is gone and therefore, it’s like the movie is corrupted after changing the artwork. Any ideas? Has anyone encountered this before?

    Just checked and I have the updated itunes 8.0.1 with the poster frame problem.
    I finally found a fix for the movie album artwork problem.
    After realizing several movies had the same poster frame as one of the movies. I deleted the movie with the common poster frame which had been copied to other movies. The other poster frames changed on the other movies because they no longer had a reference to the file from which the poster frame was copied. So I copied the deleted movie back into itunes and then got to thinking that perhaps there is something else in common with the movies which displayed the same poster frame. I found that I had set the album field to the same title. So I changed the album field file by file, to something else. Then I set the poster frame after playing a few seconds of the video at a point where I wanted the frame set to the current frame. I got a film icon on the movie icon for a few seconds while it changed it. Sometimes I had to repeat selecting the different poster frames for each movie because it didn't take the first time... the second time I selected a different poster frame it was then set to the first poster frame that I selected. So now the movies which all had the same album "Aviation" now are all changed to "Flight Training" Of course, now the poster frames for those movies are all the same poster frame but at least they are correct for the type of movie.
    So if the album name is set to the same thing on several different movies they will all have the same poster frame.

  • HT1947 Apple Remote will not connect

    So I have tried everything on the help article but nothing seems to work. Whenever I try to connect my remote to itunes, it doesnt work. I tried putting the password in but everytime I do, it just says that the password I entered was incorrect. I've tried this many times to the same result. In addition, I have tried setting it up with Homesharing as well, but that as also not worked. I've tried everything on the help articles, so anything besides that would be helpful!

    I have the same problem with two new Macs (iMac 24 Alum and MacMini Core2). Interestingly, it works if the ScreenSaver is in "Test" mode. But once the Screen Saver is activiated "for real" the Apple Remote gives me the same problem you have. I predict/hope that this will be resolved in an update soon.

  • My 3gs will not switch on it had 70% left in the battery tried charging but no good also tried soft reboot only get apple logo then goes off do i need a new battery?

    my 3gs will not switch on it had 70%power turned off but will not turn on,tried charging no joy tried soft reboot got the apple logo then it went off again,Do ineed a new battery or is it somthing else?

    Hi colin198,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, seethis article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    I hope this information helps ....
    Have a great day!
    - Judy

  • When dragging and dropping files in Lion Apple Magic Mouse will not "let go" of file even after button is released

    When selecting file or drive icon or text, the mouse will not release the item.  Pressing esc will release item but only back to original location.

    I presume drag lock isn't checked in System Preferences, but it sounds like maybe it's been set elsewhere, like by a corrupt prefs file? Can some OS X guru provide a Terminal command to disable drag lock just to be sure?
    I have a problem, also on a new MBP 2010 i7 /10.6.4, that isn't the same but might be related. The time required for the system to "release" an item selected by the pointer is exceptionally long. And if I try to click elsewhere before the pointer has been released, it only serves to extend the time. It's annoying and reduces productivity.
    Speed settings in Sys Prefs has no effect, and no other hardware is attached, using just the trackpad.
    I hope there's a setting that can be changed via Terminal; can anyone suggest the right terminology for the parameter(s) that need to change?

  • HT201406 My iPod touch is locked up. It will not restore from update mode. After holding the on/off button down the slide to powerer off does not appear.

    My iPod is loched up. I downloaded a new update and now it will not restore.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Itunes 11.1 will not install on my mac even after it restrts

    I am having trouble ungrading itunes. I open itunes and it give me the option to upgrade and i do and follow through but it will not install even after restarting and everything.

    Never accept or download a software up date that is not from an authorized Apple site. You don't know if any one tampered with the software if you d/l from another source such as a dropbox account.
    MJ

  • My AppleTV will not connect to Wi-Fi even after restore.

    I have access to two different Wi-Fi networks in my house and it will connect to neither. I connected it to my MacBook Pro and did the full restore through iTunes, but it still doesn't work. Every other Apple/iOs device in the house connects, although my wife's MBP recently had an issue with Wi-Fi and it still acts up sometimes. Any advice? Is there something I can do to manually enter an IP address, etc.? Connecting it to Ethernet is not an option.

    P.S. - The ATV can see the Wi-Fi networks, but will not connect after I enter my password...

  • Firefox will not open on my computer, even after reinstall. Please help?

    I've been using Firefox for a long time and it's been working well. I'm on acer Windows 7. However now it will not open even when I try to run "C:\Program Files\Mozilla Firefox\firefox.exe". Chrome or Internet Explorer work fine. I also reinstalled Firefox and it still doesn't work.
    Here's the id of my latest crash (from 30.4.2014): bp-4e981129-aea6-4b23-87a2-739b42140430
    Thank you for any help with fixing this.

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    Profile Backup and Restore
    *http://kb.mozillazine.org/Profile_backup
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • My iPhone 4 will charge on a wall socket but WILL NOT charge on computer or even connect to the computer and show up???

    My iPhone 4 will not connect to my MacBookPro. It will not charge on my MacBookPro, but it will charge on a wall socket and it will play music in a 3rd party speaker system??
    This is extremely frustrating not only can I not back up my iPhone but I also can not update its OS etc.

    Have you tried other USB Sockets on the MBP?
    Have you tried other devices in these USB sockets?, do these work?
    Sounds like a fault on the Macbook

  • Installed Firefox on Mac (OS 10.5.8) Will not open a browser window even after rebooting. Also - Must "Force Quit" to exit Firefox

    I installed Firefox on my Mac today (Mac OS 10.5.8) However File>New does not open browser window. Nothing happens. I rebooted and launced Firefox again but this did not help. I had been using Safari. Firefox is clearly running and I must do a "Force Quit" to quit Firefox.
    == This happened ==
    Every time Firefox opened
    == I installed Firefox on my Mac today. ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/533.17.8 (KHTML, like Gecko) Version/5.0.1 Safari/533.17.8

    Hello John.
    Hopefully this support article is what you need:
    https://support.mozilla.com/en-US/kb/Firefox+will+not+start
    Also, you may be interested in this one:
    http://support.mozilla.com/en-US/kb/Firefox+hangs

Maybe you are looking for

  • Enable comma separated values (CSV) output

    I am trying to figure out how to (Enable comma separated values (CSV) output ) for a report. Do you have an example or info on how to do that?

  • Can we make the SELECTION CRITERIA BOX act as a Menu / Submenu system?

    Dear All, I have written several queries. For user convenience, I wish to combine all related queries in a single Query and use the Selection Criteria box as a Menu System to select which Query script to run. I can already do this by the use of varia

  • Problem in synchronizing two executions

    One execution (not in loop structure) is to run vi-A to move a motor by certain distance. Another execution is a loop struction, and in each loop execution vi-B inside it acquires current motor position. I hope to synchronize this two executions so t

  • Any good table for Capacity Planning?

    HI all, Is there any table for capacity planning? we want to do some development to get capacity requirements data for each work center, don't like using CM01. Thanks! Harvey

  • List Box Limitations?

    I'm using Acrobat Pro 8 on a Mac Leopard OS Is there a limit as to how many entries a list box can hold? I'll probably end up with about 150 entries as part of a medical history form and the list box would repeat with each recordset. Ideally, once I