HT3180 light flash slowly - no image on the screen - urgent.

hello
today i received my new apple tv
i connected it earlier andit worked
later on i tried to use it again but the light isalways flashing slowly and i can only see the apple sign on the tv.
any suggestions ??
sure i am on the correct input in the tv (hdmi)

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Similar Messages

Satellite Pro M10: image on the screen is very dark

I have a Satellite Pro M10 Notebook that has a black screen, i.e. the back light doesn't work. There is an image on the screen but it is very dark. When connecting an external monitor I get a normal image on that monitor.
From information gathered from other posts here I conclude that there is a problem with the backlight of the lcd screen or the inverter. I checked all connections, but that didn't solve the problem. If I bring the laptop to a service center what will it approx. cost to have it repaired? The thing is 2-3 years old, so if it is very expensive I might better get a new laptop.
I'm sure I will be able to change to inverter board myself, but how will I be able to determine that the inverter is the problem? How to obtain a new inverter? Does anyone of you know the right product number?
My Pro M10 itself has product number PS630E-G205Z-DU.

Hi
I agree with Tobi. You description sounds like a faulty FL-inverter.
This part is placed behind the LCD screen under the lid cover.
As mentioned this part isnt very expensive and you could order it from the Toshiba service partner in your country. But please note that if you have no replacements experiences so you should ask the technicians for the help.

HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

Cconnect it to your computer with the latest version of iTunes installed.

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

If you do Cmd+Shift+3 you'll get a full screen image saved to your desktop as a jpg file.
Also, you can use Cmd+Shift+4 and you'll get a cursor which you click+drag to draw a box. When you release the drag the boxed in area will be saved to the Desktop as a jpg file.

Images in the screen corrupted by some strange lines ...

Hi,
I have many troubles concerning the display on my MacBookPro. Often, the image on the screen is corrupted by black lines and some strange colour patterns. When I use Tiger on the same machine everything is fine. I agree that with the version 10.5.2 the situation is a bit better tan with the 10.5.1, but anyway, this is not acceptable from Apple. When I disable the Quartz Extreme (via a tool in the developer folder), everything is OK. Hey Apple, how to solve this?
Best regards, Edo

I think I solved the problem, but this is not good for Apple.
I checked the hardware specification via the "Abour this Mac" ... and I discovered that my graphic card doesn't support the Quartz Extreme!!!! So, why my Leopard configuration is set to support this feature? I have found this link that for the moment, solved my problem
http://www.macosxhints.com/article.php?story=20040724190553112
I hope that Apple will fix this in the version 10.5.32323
Regards

Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer. I've tried to start from the disk, and before I can even run a repair off utilities, it happens again. What's up?

When I started my iMac today, it started beeping like an alarm horn. I shut it down, and held the startup button a little longer to get it to start. Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer. I've tried to start from the disk, and before I can even run a repair off utilities, it happens again. What's up? Am I screwed? HELP!!

What you are seeing is a kernel panic, often but not always connected with a hardware or peripheral issue, so, unplug everything except mouse and keyboard, reboot and hold the shift key as soon as your hear the chime, continue holding it until you see the Apple Icon and spinning progress indicator, then post back.
It will take noticeably longer than normal to start.

Adding more then one image on the screen

hi all,
    i want to add different different images on the screen.
    this is new task to me ... and as i am new in ABAP
    i am finding it a bit difficult to start with this problem
    so please provide me the complete information from very start to end.
thanks in advance.

hi ravindra,
i had gone through the program and in it ,they are passing the static value in the respective internal table like this
query_table-name = '_OBJECT_ID'.
query_table-value = 'ENJOYSAP_LOGO'.
and i want to know what is OBJECT_ID and where to create it where this image ENJOYSAP_LOGO is stored. plz tell me every thing about the two fields.
regards,

Make image fill the screen

I want to make the image fill the screen like http://www.digitalstormonline.com/bolt-ii.asp, i want it to fill the screen even when zooming in and out

Hi,
did you check this
Add an image to the background of the page or browser | Adobe Muse CC tutorials
Check the below link, under heading "Working with elements set to 100% width"
Adobe Muse Help | Using Fill and Browser Fill options
Do let me know if you have any question.

I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?

I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?

Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

IPhone 5, backlight works but there is no image on the screen. How do I fix the problem or get a replacement?

I have an iPhone 5 32GB that is less than a year old, I smashed the screen not long ago and had it replaced and now the backlight works but there is no image on the screen. Its fully working apart from the screen, can I get a replacement? Or how else would anyone suggest to fix the problem?

Make an appointment at the genius bar of your local Apple store or contact AppleCare. Some Apple Stores in the US can replace the display in an iPhone 5 for $149. If it requires more than that, a replacement phone will cost you $229.

I received a notice to my ipad to update ios7 the latest version. i clicked on update now and the ipad is frozen with an itunes logo and a ipad connector image on the screen. anyone help me with this

I received a notice to update my ipad to the latest version of ios7 and when I did the ipad froze with a itune logo and an ipad connector image on the screen..i have turned it off several times but it remains frozen. anyone help with this?

Unfortunately, your iPad went into recovery mode and must be restored now. There is no getting around this. You need to use iTunes to do this as well. Read this for more instructions.
If you can't update or restore your iOS device - Apple Support

Frozen iPod classic with lock and battery images on the screen

When I unlocked my iPod classic while listening to music, everything stopped, and i got an image on the screen of the time when this happened (6:30), a lock image below it on the left, and a black horizontal battery on the right. The iPod won't work now, whether locked/unlocked or whether connected/unconnected to my PC/iTunes. What, if anything is the fix?

Have you tried just a hard reset yet? To do this, first make sure the hold switch is toggled to the off position, then press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
B-rock

Keeping an image on the screen while scrolling

Hello,
Needing some advice...
Is it possible to keep an image at a static location on the screen when the page is scrolled down?
For instance, if I have a .swf with properties of 1700 px height and I am displaying an image (jpg) in a loader whose y position is 40px from the top of the screen when viewed in a browser.
is it possible to "float" that image so that it stays 40px from the top of the browser window when the user scrolls down to see the rest of the page?
I'm trying to set up a gallery and have a grid of thumbs displayed, each of which open a full-sized copy of the image on the thumb.
The thumbnails go beyond the bottom of the screen and when I scroll down to see more thumbs, if a large image is displayed at the time, it scrolls off the top of the screen.
I'm hoping to keep that large image displayed in the center vertically even as the page is scrolled down.
Any suggestions on how to approach this will be greatly appreciated.
Thank you.

as3:
import flash.events.Event;
addEventListener(Event.ENTER_FRAME,f1);
ExternalInterface.addCallback("pixel", pixel);
function f1(evt:Event)
ExternalInterface.call("fonk1");
function pixel(yyy:int)
mc.y=yyy+150; // mc is your floating image
html:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>Untitled-2</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
</head>
<body>
    <object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="550" height="1500">
      <param name="movie" value="Untitled-2.swf" />
      <param name="quality" value="high" />
      <param name="wmode" value="opaque" />
      <param name="swfversion" value="6.0.65.0" />
      
      <param name="expressinstall" value="Scripts/expressInstall.swf" />
      
      
      <object type="application/x-shockwave-flash" data="Untitled-2.swf" width="550" height="1500">
        
        <param name="quality" value="high" />
        <param name="wmode" value="opaque" />
        <param name="swfversion" value="6.0.65.0" />
        <param name="expressinstall" value="Scripts/expressInstall.swf" />
        
        <div>
          <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
          <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
        </div>
        
      </object>
      
    </object>
    <script type="text/javascript">
function fonk1()
document["FlashID"].pixel(window.pageYOffset); //for IE:document.body.scrollTop
swfobject.registerObject("FlashID");
    </script>
</body>
</html>

Garbled Images on the screen, not sure what is going on

Everything was going fine and then I left my computer on overnight and everything was garbled on the screen and couldn't be read. I connected it to an external display, same issue. I took a screen shot and sent to another Mac, and it showed all of the issues. I wish there was a way to post the image, it may help with coming up with a solution. I rebooted, no change. I reformatted and reinstalled 10.4, no change. The strange thing is, is that if I boot from my TechTool disc, everything looks fine. Also, if I boot into safe mode (shift key held down), everything looks fine as well. I am not sure what is going on, and what to do to fix it. Hopefully someone out there can point me in the right direction. I don't want to have to get rid of my iBook. TIA.
Message was edited by: MacSpud
Message was edited by: MacSpud

Macspud,
Well if pressure from underneath didn't help there is this:
http://www.coreyarnold.org/ibook/
Which basically involves pressure on other chips.
I have been slowly working on that 1.33 iBook but I've been busy, vacation and working. I have found suspicious looking solder joints in the area indicated and also on that Danish site. That might be a good idea I might try that with the 1.33 pressure on various chips while trying to boot.
As far as video memory there are two identical chips underneath and toward the video output from the ATI GPU chip. I don't see that they are clearly BGA but there's also no conventional peripheral conventional solder tabs or lands.
Another point, there are 2 huge and a large chip on this board and they're all BGA. The large one being the CPU. So there would also be another 3 points of failure. Any one of these that pressure corrects could be reballed or shim fixed.
Richard

How do I get the "all floating" option in the "layout" to work? Something happened that it stopped working. I like to have several images on the screen at the same time.

I like to work with several images at the same time on the photoshop elements 12 "expert" screen and used to be able to have the "all floating" option in the "layout", thereby altering each image differently on the screen. I'm an artist and view multiple images while painting. But now that option doesn't work for some reason. Help!

Editor preferences>general, turn Allow Floating documents, but then you may need to go to window>images>float all in windows to make it work for currently open files.

HT3180 light flash slowly - no image on the screen - urgent.

Similar Messages

Maybe you are looking for