HT3180 My Apple TV is not starting after the software updates

I have tried to use menu and down on remote , disconnected power supply etc but nothing is working to restart the Apple TV

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Similar Messages

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • My MacBook pro did not restart after the software update

    My MacBook pro did not restart after the software update

    Kappy wrote:
    Now, were I a mindreader this wouldn't be an issue, but unfortunately, I'm not.
    WHAT??? Now that's a disappointment! I was sure the all-seeing, all-knowing Prof. Kappy would instantly discover the problem thru time and space.... 
    Ok, back to the issue at hand, the Prof. is right. In none of the OP's participation, nor in any of his choir of followers save mommy power is there the least hint of what Apple product is failing. While y'all get a move on and disgorge the details, may want to try a Safe Boot. Hold down the Shift key prior to the startup chime and wait awhile. IF it starts, then it means you have some third-party software that's causing the problem. Else there's a strong probability a complete reinstall will occur in your near future.
    In the future and in spite of what some purists may say, be sure to service the system disk BEFORE patching. By "service" I mean booting up the Mac using your Install DVD (Snow Leopard or priors) or booting in Recovery Mode (Command R, in the Lions and successors), running the Disk Utility found in that mode and doing a Repair Disk and Repair Disk Permissions. Until NO errors show up. Cause patching up an already damaged system will only make things worse.

  • My iPhone will not start after new software update. Freeze on apple screen

    I updated the phone software today through the new software update directly from the phone and it will not restart past the apple screen. I have tried a hard restart, no dice.
    wish I had waited.

    Got it back up and working by putting in recovery mode and restoring through itunes, but lost lots of settings and app. info. I took about 4 efforts to resync after restore, not sure why, certainly not smooth or intuitive. 2 hours of my life I wish I had back.

  • Firefox will not start after a software update

    After software installation Firefox will not start and displays a message box that says that it crashed and can't start

    Installed latest Firefox v. 6 software.
    Drop box saying that Firefox could not start and had to shut down upon start.
    Yes, Firefox started with Shift and click of icon.
    I uninstalled software, re-installed and it seems to be working fine.
    Thank you for your help

  • Tiger does not start after failed software update

    Hi,
    I ran software update, to install updates for Tiger, 10.4.6. I got a prompt to shut the laptop down, and follow the instructions on startup of the laptop. I pressed the shut down button, I was then told by the instructions to hold down the power button until the white sleep indicator flashes, and the bar travels across the screen. I accidentally let go of the power button and it shut down halfway through the update (I cannot remember what the update was).
    Now, when I press the power button, the screen stays blank (no flash or anything), no sounds are produced, but the sleep indicator stays at half brightness, until I force shut down the laptop again (holding down the power button).
    How can I get this laptop to start up again normally?
    Thanks,
    George.

    Hi George,
    This sounds like a firmware update. Apple has a firmware restoration CD that you can make. What you do is download a disc image of the CD, burn it in another Mac, and then run it on your computer that's not working. The directions are kind of involved, so you might need to print them.
    Also, pay special attention on the firmware download page to the section where it tells you which computers it's good for. I've linked to version 1.7, but there are other versions available, too, depending on which computer you have.
    charlie

  • TS1398 Wifi not responding after the software update. restored the system but still no luck.

    After I updated the software, the wi-fi has stopped working. I have already restored the system but the problem remains. Wifi is working fine otherwise.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

    My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
    I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

    here is link to the apple product feedback website:
    http://www.apple.com/feedback/

  • Windows could not start after SP-3 update

    Windows could not start after SP-3 update
    After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
    Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
    You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
    I used the power button to shut down Windows & then booted into Mac OS X normally.
    I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
    Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
    Thanks for any help.

    Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
    Message was edited by: growler62000

  • Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Hi Tokha,
    If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article - 
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Why does installation not start after the message "setup wants to make changes"?

    Why does installation not start after the message "Setup wants to make changes.  Type your password to allow this"?

    Hi
    It wants your system's admin password. Standard procedure on Mac for non-admin users
    Thanks

  • I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, etc.  Anybody at Apple listening?

    I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, 3. View preferences in windows don't hold,  etc.  Anybody at Apple listening?  Anybody else out there having these kinds of problems?

    10.7 was horrible unstable so I waited until 10.7.1 and tried it again. Well I have to say that it is still a defective OS. I am reverting to Snow as we speak from my carbon clone copy.. This is really the worst OSX I have ever used. It gives me random Kernel panics for no reasons, unstable airport and hundreds of small issues that are just not necessary. For instance I can't use QuickTime in Lion to trim a videoclip ( the UI goes mad and the trimslider becomes inoperable and hangs the Player window ) while in Snow it is no problem. Itunes gives me crackling sound when the equalizer is turned on, Graphical glitches in Photoshop, games crashing, Preview.app not working with some pdfs, so I need Adobes reader which I never used before.. It is definately not ripe for mass usage. Might 10.7.2 or 10.7.3 fix it, but not yet.
    * and just for the records : the hardware is absoltely ok. Because in Snow it works as it should. ( So many Lion fanbois are talking : "your Ram is defect", defintely NOT. - Lion is defect! ).
    Shame on you Apple.
    Message was edited by: Sjazbec

  • Why MLB.TV is not appearing after the last update?

    why MLB.TV is not appearing after the last update?

    Make sure the store is set to the US.. Also restart the ATV.

  • My Canon MX310 Series Printer failed as the software "is currently not available from the Software Update Server"? What is the matter with Apple OSX Mountain Lion?

    Mountain Lion stopped working with our Canon MX310 Printer? Why is the software not available from the Software Update Server?

    The printer and ICA scanner driver is available from Apple. There is probably some other reason why you cannot get the drivers.
    You can also get the drivers from Canon.
    But reading your post it sounds like you were printing to the MX310 and recently it has stopped printing. Is this the case?

  • HT201210 After the software update my iphone 5 says no sym

    My iphone says no sym after the software update how do i fix this?

    Make sure you have the latest version of iTunes available (11.1) from http://www.apple.com/itunes
    Hope that helps.

Maybe you are looking for

  • MRP Lot-Sizing Procedures PK

    Hi experts, When we use lot-sizing procedures PK, I have a problem about it. Can you please kindly help me. The problem is. When we run MRP and get the release date as past date in purchase requisition. I would not like system to propose release date

  • Problems networking a G4 + G3, 0S9 + OS 8.6

    I've decided to give away my old faithful beige G3 tower to a friend who still uses such machines. To pull off all the relevant data, I'm trying to network this old computer with my Dual Boot g4 running 0S9.2. I have both machines hooked up via ether

  • Can I use a song as a ring tone and if so how

    I would like to use one of my tracks as the ring tone but dont seem to be able to - is it possible ?? and if so how ??

  • All mail messages appear in ical work calendar

    For some mysterious reason, all email messages I receive in Mail turn up as To Do items in my Work calendar in iCal. I tried turning off the iCal option 'Automatically retrieve invitations from Mail', but that makes no difference. Anybody any ideas a

  • Creating a "Don't show this again" checkbox

    Hi all, I'm working on a mini-site and I have this welcome page at the beginning that allows you to continue to the homepage with a 'continue' button. I'd like to add a checkbox enabling a "don't show this again" option when checked. I have been tryi