HT3258 My Outlook 2011 for Mac search feature is compromised since updating to Mt Lion. It will only search new messages or contacts. Is there a fix for this?

My Outlook 2011 for Mac search feature is compromised since updating to Mt Lion. It will only search new messages or contacts. Is there a fix for this?

Sync Outlook Mac with iPhone: http://lmgtfy.com/?q=sync+outlook+mac+with+iphone

Similar Messages

Since upgrading to Lion my in built camera picture quality is terrible, is there a fix for this?

Since upgrading to Lion my in built camera picture quality is terrible, is there a fix for this?

I have the same problem but it happens for many flash videos.
For exaple on gametrailers.com

Shuffle feature on my music does not work and the same song repeats until manually changed. Is there a fix for this?

I had not experienced this until upgrading to IOS 6. This completely vods the reason I bought this particular phone. Has anybody else had this problem, and I'd there a fix?

To take advantage of All the Features in iOS 5 See Here
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

HT1645 I had about 1:40 run time on my video for DVD and chose "professional" as I didn't need to rush. Got Multiplexer Error message. Found no reason or fix for this situation. What am I to do to fix?

This site doesn't seem to get answers. I typed the problem above, then it asks same question before post. What help is that? Needs to be clearer what it wants from me. Others seem to have same issues with iDVD's clarity of information. I have been editing for 12+ years and still can't figure out solutions more than trail and error.

Hi
1:40 - can mean 1 sec 40 frames - or - 1 minute 40 seconds - or - 1 hour 40 minutes
1 hour 40 minutes is 100 minutes and iDVD only cares about duration
• Pro Quality encoding - up to 120 minutes (movie + menu) (menu can be 15 minutes or even more
• Best Performances - up to 60 min. - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) up to 120 min. - slightly lower quality than above
Reg "Multiplex Error" - This is a tough one and can have a lot of reasons. Read on
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

"1 item" and pointed finger inside message box. Is there a fix for this problem?

When I'm in e-mail, I get a hand with the pointed finger and a message box saying "1 item". The hand and box follow my pointer around the screen but I can't open up any e-mails. The only way out of it is to go up to Hotmail on top, select it and them select "In-Box." This only occurs in Firefox. Internet Explorer works fine and I never have the problem.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

I have 5,000 photos on my Ipad and it locks up when I am in photo mode and try to do a slideshow. Is there a fix for that or is there a limit on

I have a I-Pad which I use to upload my photos whil traveling. I was recently gone for 40 days and ended up with over 5,000 photos. When I am in Events mode, slideshow works fine. But when I switch to Photo mode or view and try to do a slideshow, it locks up and I have a black screen. My question is 2 fold. 1. Is there a limit to the # of photos that the slideshow will accomodate? 2. If not, is there a fix for the slideshow not working?
Thanks

Two possibiilities here:
1. Your start up disk is nearly full
Or
2. You have minor damage to the iPhoto Library and it's giving you a bogus message.
But here's the thing: A full start up disk is a very serious issue and needs to be dealt with fast.
So, how big is your Hard Disk? How much free space on it?
Regards
TD

I use Office Outlook for mac 2011 to organise my email & calendar. Since updating to OS X Mavericks I have not been able to sync the calendar to my iPhone. What do I need to do to get the calendars syncing again?

I use Office Outlook for mac 2011 to organise my email & calendar. Since updating to OS X Mavericks I have not been able to sync the calendar to my iPhone. What do I need to do to get the calendars syncing again?

Jason The Hague wrote:
Thanks! But seriously why have Apple disabled the info sync on iTunes? By 'Upgrading' to Mavericks I've inadvertantly disabled my Apple mobile devices from fulfilling their function. Come on Apple work with us here!!
Apple told developers they were removing that service over two years ago. The developers that depended upon it should have done something about it.
Why did they remove it? My guess is because it was pretty crappy, was difficult to maintain, and wasn't a good solution for multiple devices that could get the info without tethering to a "base" Mac.

Can i push content from icloud to my outlook 2011 on mac?

i'm transitioning from pc to mac.
i bought an imac on which i have installed office 2011.
i want to continue using outlook on my imac.
however, i'm not sure whether to use icloud or office 365 to manage my email, calenders, contacts online.
i have set up an icloud account.
i have also bought a macbook pro, which will serve as my work laptop replacing my hp laptop.
my hardware setup is a home desktop (imac) which will be my main work computer at home.
my macbook pro will be my portable work laptop i will use on travel work.
i have an iphone which i'm only using as an itouch, since my provider is tmobile and they don't support iphones.
i will also be using an ipad 3 for on location assignments.
i want an email setup which will allow me to manage all my different email accounts, calenders, contacts online, but that will sync with my outlook on my mac as opposed to mac mail, ical, address book.
i'm used to working on outlook and would like to continue to use it on my mac.
but i don't know if icloud is the solution? i don't know if icloud will push my content to outlook 2011 on mac?
please HELP??????

julian,
thank you very much for your reply.
nevertheless, just because i went through all the efforts of switching to a mac platform, yes it's true that i do want to try something different, however that does not mean i want to stop using a software that i find very useful.
microsoft has created office 2011 for mac in order to appeal to people like me....but they have stopped short by not allowing outlook for mac to work with industry standard protocols which icloud uses.
therefore, to be honest, outlook is more important to me for managing my contacts, calender and emails than icloud is. i guess i will now have to consider using office 365 as a cloud option which i hope will sync with my outlook on mac version.
i will then be able to manage my emails, contacts, calender via the web, which i can access via web on ipad, macbook pro, iphone, etc....
this may need to be my solution until microsoft updates outlook to work with icloud.
that is unless anyone else has another option i could consider??????
OPEN TO SUGGESTIONS????
thanks again.

I am not able to transfer emails from outlook 2007 in Windows 8 to outlook 2011 in Mac. I export .pst file to my hard drive from win 8 and then import in outlook 11 in mac, the folders including subfolders are created but there are hardly one email

i am not able to transfer emails from outlook 2007 in Windows 8 to outlook 2011 in Mac. I export .pst file to my hard drive from win 8 and then import in outlook 11 in mac, the folders including subfolders are created but there are hardly one email. Please help

Post your question in the MS Mac forums since it's their software you're having issues with:
http://answers.microsoft.com/en-us/mac

The search feature in Yosemite only finds a few files when I know many more exist. Is there a fix for this problem?

The search feature in Yosemite only finds a few files when I know many more exist. Is there a fix for this problem?

Are you searching for file names or content? If it's the latter dDownload and run Find Any File to search for the same file names.
FAF can search areas that Spotlight can't like invisible folders, system folders and packages. If there are files with those file names on the hard drive FAF will find them.
In any case reindex the HD for Spotlight according to this Apple document: Spotlight: How to re-index folders or volumes - Apple Support

MobileMe and Outlook 2011 (on MAC) sync

Does anyone know when MobileMe will be able to sync to Outlook 2011 (on MAC) SP1? Microsoft claim that it would have worked if Apple hadn't changed the mobileme calendar suite...
I know Outlook 2011 can sync via iTunes, but that's no help to me...

MobileMe Apple Support Communities

I downloaded Lion onto my Mac, and now cannot open or access any of my Microsoft word documents or Power Points. Is there a fix for this? I need my documents

I downloaded Lion onto my Mac, and now cannot open or access any of my Microsoft word documents or Power Points. Is there a fix for this? I need my documents

If it's because you were using Office 2004, the eight year old version of Office that was written when Intel processors were not used in Macs, then there will be no fix. Lion dropped support for PowerPC applications, as has been widely reported since Lion's release last August.
You can upgrade Office 2004 to Office 2008 or Office 2011. You can use iWorks 2009 that can open Microsoft files. You can use a number of free applications that are also capable of working with Microsoft documents. You can go back to Snow Leopard, if you have a backup. Or, if you have an external drive or room to add a partition to your current drive, you can install Snow Leopard on it.
Search these forums for more information. If this is your issue, it's been posted and answered several times a day since August 2011.

Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?

Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?

gmiller0 wrote:
My mac has 10.7.3 and will not connect to wifi after it wakes up. Have contacted AppleCare but the problem cannot seem to be resolved.. I guess this is a major issue with Lion:(
What model of Mac? I have a MBP running 10.7.3 and do not have that issue. From the other couple of posts I've seen about it, it seems to be maybe an issue with some iMacs? Have your tried searching the Lion or iMac forums for similar issues, just to see if anyone has hit on why it is happening?

After updating to OSX 10.7.3, my search (spotlight) no longer works. Is there a fix for this?

After updating to OSX 10.7.3, my search (spotlight) no longer works. Is there a fix for this?

Have you tried going to System Preferences > Spotlight > Privacy and dragging your hard drive into the box then drag it back. That will trigger a re-index.

Firefox for Mac OS 10.5 should be updated. I have OS 10.5.8. Do I need to upgrade?

Firefox for Mac OS 10.5 should be updated. I have OS 10.5.8. Do I need to upgrade?

Firefox 16 is the last version that will run on Mac 10.5. You can purchase an update to Mac 10.6 for about $20 US, if the hardware in your machine supports it.

HT3258 My Outlook 2011 for Mac search feature is compromised since updating to Mt Lion. It will only search new messages or contacts. Is there a fix for this?

Similar Messages

Maybe you are looking for