HT3275 could not find previous back ups that where there before only giving me one date

I can not see my previous back ups that I have been doing for the past year. The last time I went to back up it said i had no space left but knew that I had. All other back ups had gone except for one. I have a lot of images from my desktop over the past few months that I cnt find now.
Hope I'm making sense.

I ran into the same problem -- I had this error :
   Red "i" message: "The backup volume is read only."
I rebooted my system, then reset my Time Machine backup disk (to the same disk I've been using for the last year).
Now all my history is gone -- TimeMachine is starting from scratch. Please help !!! - I need to figure out how to get access to all my old daily backups back.

Similar Messages

  • Error while crawling LOB contents in SP 2013:'Could not find default endpoint element that references contract in the ServiceModel client configuration section

    Hi,
    I created custom BDC Model using Visual Studio. In ReadList method i am getting data using Web Service call. Using this External Content Type (BDC Model) i created one external list and it is populating with data.
    I created one new content source in search service application using this BDC Model and when crawled this content source i am getting the below error.
    Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Runtime.RuntimeException MethodInstance with Name 'ReadList' on Entity (External Content Type) with Name 'Entity1' in Namespace 'bcsex.BdcModel1' failed
    unexpectedly. The failure occurred in method 'ReadList' defined in class 'bcsex.BdcModel1.EntityService1' with the message 'Could not find default endpoint element that references contract 'ServiceReference1.Service1Soap' in the ServiceModel client configuration
    section.
    I included the bindings and client end point configuration settings in web.config file located at
    \\Inetpub\wwwroot\wss\VirtualDirectories\Port_Number, but still getting the same error.
    Please help. Thanks a lot.

    The Issue resolved by including the bindings and client end point configuration settings in
    machine.config file located at C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\ and also restarted the server after config changes.

  • WCF Published Orch - Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding

    I have an orchestration published as a web service.  It was working fine on our test environment, we deployed to production, and now getting this error.  The website wouldn't go in the BizTalk MSI, so we copied the files.  We reset the Authentication
    to match the test system (we are using Basic Auth).
    When we try to browse the webservice in the browser, it prompt for userid/password, we enter it, then it gives the following error. 
    I'm not even sure what it means by "base address", if URL was https://prod.mydomain.com/myapp/myservice.svc, would https://prod.mydomain.com be the based address? In the test environment, the URL is https://test.mydomain.com/myapp/myservice.svc. 
    In both environments, we have a customer calling this webservice.
    Also, I don't know what it means "scheme http".  We are using https:... on the URL.
    I'm thinking this is either security related, something to do with the app pool being different, or maybe something to do with bindings. 
    Thanks,
    Neal Walter
    http://MyLifeIsMyMessage.net
    Web.config:
        <services>
          <!-- Note: the service name must match the configuration name for the service implementation. -->
          <service name="Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkServiceInstance" behaviorConfiguration="ServiceBehaviorConfiguration">
            <endpoint name="HttpMexEndpoint" address="mex" binding="mexHttpBinding" bindingConfiguration="" contract="IMetadataExchange" />
            <!--<endpoint name="HttpsMexEndpoint" address="mex" binding="mexHttpsBinding" bindingConfiguration="" contract="IMetadataExchange" />-->
          </service>
        </services>
      </system.serviceModel>
        <system.webServer>
            <security>
                <authorization>
                    <remove users="*" roles="" verbs="" />
                    <add accessType="Allow" users="myCustomer" />
                </authorization>
            </security>
        </system.webServer>
    Server Error in '/eSecuritelIn' Application.
    Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered
    base address schemes are [https].
    Description:
    An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
    code. Exception Details: System.InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https].
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using
    the exception stack trace below.
    Stack Trace:
    [InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes
    are [https].]
       System.ServiceModel.ServiceHostBase.MakeAbsoluteUri(Uri relativeOrAbsoluteUri, Binding binding, UriSchemeKeyedCollection baseAddresses) +16582113
       System.ServiceModel.Description.ConfigLoader.LoadServiceDescription(ServiceHostBase host, ServiceDescription description, ServiceElement serviceElement, Action`1
    addBaseAddress) +1082
       System.ServiceModel.ServiceHostBase.ApplyConfiguration() +156
       System.ServiceModel.ServiceHostBase.InitializeDescription(UriSchemeKeyedCollection baseAddresses) +215
       System.ServiceModel.ServiceHost..ctor(Object singletonInstance, Uri[] baseAddresses) +400
       Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHost`3..ctor(IsolatedReceiverType isolatedReceiver, BizTalkServiceInstance serviceInstance, Uri[] baseAddresses)
    +36
       Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +533
       System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1413
       System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
       System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1172
    [ServiceActivationException: The service '/eSecuritelIn/eSecuritelIn_OrchPublished_RepairEquipmentService.svc' cannot be activated due to an exception during compilation. 
    The exception message is: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https]..]
       System.Runtime.AsyncResult.End(IAsyncResult result) +901424
       System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +178702
       System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107
    Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET
    Version:4.0.30319.272

    When you want to migrate Web Applications from one environment to other there are multiple ways to achieve it.
    1) Migrate in MSI- Export MSI and select the option for your Web Application, however I don't recommend this option
    2) Is to browse the folder for Web Application(Right click on web app and browse). Copy this folder(normally within inetpub folder) and take it to the inetpub folder of other environment. Later from the IISManager create application.
    Are you not using the same Binding file?
    Check you web.config file and see if the endpoint is configured for mexHTTpBinding.
    Old: binding="mexHttpBinding"
    New: binding="mexHttpsBinding"
    web.config snippet:
    <services>
    <service behaviorConfiguration="ServiceBehavior" name="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService">
    <endpoint behaviorConfiguration="AspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="webBinding"
    contract="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService" />
    <endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" />
    </service>
    Also look into the below article- How to fix: "Could not find a base
    address that matches scheme http for the endpoint with binding WebHttpBinding" Errors
    Moving to https = Could not find a base address that matches scheme
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

  • Custom Timer Job to execute WCF web service error - Could not find default endpoint element that references contract

    Hi,
    I am currently creating custom timer job to call WCF web service to perform nighty job to update employee document library metadata. If I update regular list/library items it updates correctly on a specified interval basis. However when I try to integrate
    the WCF client, it throws error shown below :
    Could not find default endpoint element that references contract EmployeeServiceReference.
    EmployeeServiceClient in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element.
    I followed exact instructions Andrew Connell has provided but included my logic in execute()
    public
    override
    void Execute(Guid
    targetInstanceId)
    var empClient =
    new
    'ServiceReference.EmployeeServiceClient();
    var employee = empClient.EmployeesMethod();
    I have tried all approaches to manually adding app.config settings in sharepoing web.config but still it throws the error mentioned. It seems that application config and sharepoint site config binding issue still exist and cannot be resolved.
    <system.serviceModel>
    <bindings>
    <basicHttpBinding>
    <binding
    name="BasicHttpBinding_EmployeeService"
    />
    </basicHttpBinding>
    <netTcpBinding>
    <binding
    name="CustomBinding_EmployeeService">
    <security>
    <transport
    protectionLevel="None"
    />
    </security>
    </binding>
    </netTcpBinding>
    <wsHttpBinding>
    <binding
    name="WSHttpBinding_EmployeeService">
    <security
    mode="None"
    />
    </binding>
    </wsHttpBinding>
    </bindings>
    <client>
    <endpoint
    address="http://services.mycomp.com/EmployeeService.svc"
    binding="wsHttpBinding"
    bindingConfiguration="WSHttpBinding_EmployeeService"
    contract="EmployeeServiceReference.EmployeeService"
    name="WSHttpBinding_EmployeeService"
    />
    <endpoint
    address="http://services.mycomp.com/EmployeeService.svc/soap"
    binding="basicHttpBinding"
    bindingConfiguration="BasicHttpBinding_EmployeeService"
    contract="EmployeeServiceReference.EmployeeService"
    name="BasicHttpBinding_EmployeeService"
    />
    <endpoint
    address="net.tcp://crmapp.mycomp.com:5050/EmployeeService.svc/tcp"
    binding="netTcpBinding"
    bindingConfiguration="CustomBinding_EmployeeService"
    contract="EmployeeServiceReference.EmployeeService"
    name="CustomBinding_EmployeeService">
    <identity>
    <userPrincipalName
    value="[email protected]"
    />
    </identity>
    </endpoint>
    </client>
    </system.serviceModel>
    Will you please help resolving this issue?

    Hi,
    You can use any of the three approaches:-
    1) Access web application's web.config programmatically in Execute() method.
    http://praveenkasireddy.wordpress.com/2012/12/14/access-web-application-configuration-values-in-timer-job-sharepoint/
    2) Store the configuration in xml and upload it to SharePoint document library then read from there
    http://www.sharepointdynamics.net/2011/08/using-an-xml-settings-file-to-store-values-for-your-sharepoint-projects/
    3) Programmatically configure a WCF endpoint.
    http://msdn.microsoft.com/en-us/library/ff647110.aspx
    Regards, Shruti

  • Getting a "Could not find a base address that matches scheme net.tcp"

    I've written several WCF services which use HTTP (and its variants).  Now I'm trying to learn how to write a WCF service which will use TCP.  I'm using Andrew Troelsen's book, "Pro C# 2008 and the .NET 3.5 Platform" as a guide (chapter 25).  I've asked questions related to this before on a much more complicated WCF service, so I decided to write a simple WCF service to learn how to do it, rather than work on my more complicated WCF service.  Coincidentally I chose the same routine as Troelsen did in his book, although in my case I called the WCF service SimpleAdd.
    Anyway, after writing the WCF service, I then wrote the Windows Service to host it.  I then installed it, and the installation went fine.  When I tried to run the service, the service started but then immediately stopped.  I checked the event log and found the following message in it:
    "Service cannot be started. System.InvalidOperationException: Could not find a base address that matches scheme net.tcp for the endpoint with binding MetadataExchangeTcpBinding. Registered base address schemes are [http]."
    Here's the interface code for my SimpleAdd:
    using System;  
    using System.Collections.Generic;  
    using System.Linq;  
    using System.Runtime.Serialization;  
    using System.ServiceModel;  
    using System.Text;  
    namespace SimpleAdd  
        // NOTE: If you change the interface name "IService" here, you must also update the reference to "IService" in App.config.  
        [ServiceContract]  
        public interface IService  
            [OperationContract]  
            int Add(int FirstNumber, int SecondNumber);  
    Here's the code for the implementation (I'm leaving out the using statements):
    namespace SimpleAdd  
        // NOTE: If you change the class name "Service" here, you must also update the reference to "Service" in App.config.  
        public class Service : IService  
            #region IService Members  
            int IService.Add(int FirstNumber, int SecondNumber)  
                return (FirstNumber + SecondNumber);  
            #endregion  
    And here's the App.Config file for the service:
    <?xml version="1.0" encoding="utf-8" ?> 
    <configuration> 
      <system.web> 
        <compilation debug="true" /> 
      </system.web> 
      <!-- When deploying the service library project, the content of the config file must be added to the host's   
      app.config file. System.Configuration does not support config files for libraries. --> 
      <system.serviceModel> 
        <services> 
          <service behaviorConfiguration="SimpleAdd.ServiceBehavior" name="SimpleAdd.Service">  
            <clear /> 
            <endpoint binding="wsHttpBinding" contract="SimpleAdd.IService" 
              listenUriMode="Explicit">  
              <identity> 
                <dns value="localhost" /> 
                <certificateReference storeName="My" storeLocation="LocalMachine" 
                  x509FindType="FindBySubjectDistinguishedName" /> 
              </identity> 
            </endpoint> 
            <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" 
              listenUriMode="Explicit">  
              <identity> 
                            <!--   
                <certificateReference storeName="My" storeLocation="LocalMachine" 
                  x509FindType="FindBySubjectDistinguishedName" /> 
                                --> 
              </identity> 
            </endpoint> 
            <endpoint address="net.tcp://localhost/SimpleAdd/" binding="netTcpBinding" 
              bindingConfiguration="" contract="SimpleAdd.IService" /> 
            <host> 
              <baseAddresses> 
                <add baseAddress="http://localhost:8731/Design_Time_Addresses/SimpleAdd/Service/" /> 
              </baseAddresses> 
            </host> 
          </service> 
        </services> 
        <behaviors> 
          <serviceBehaviors> 
            <behavior name="SimpleAdd.ServiceBehavior">  
              <serviceMetadata httpGetEnabled="true" /> 
              <serviceDebug includeExceptionDetailInFaults="false" /> 
            </behavior> 
          </serviceBehaviors> 
        </behaviors> 
      </system.serviceModel> 
    </configuration> 
    I don't think it will matter much, because I believe the problem probably lies in the App.config file for the Windows service, but just in case, here's the code for the AddWinService (without the using statements):
    namespace WindowsAddService  
        public partial class AddWinService : ServiceBase  
            //A member variable of type ServiceHost.  (I'm using the "Pro C# 2008" book as reference for this.)  
            private ServiceHost myHost;  
            public AddWinService()  
                InitializeComponent();  
            protected override void OnStart(string[] args)  
                //just to be really safe  
                if (myHost != null)  
                    myHost.Close();  
                    myHost = null;  
                //create the host  
                myHost = new ServiceHost(typeof(SimpleAdd.Service));    //I've included the class from SimpleAdd, which isn't in the book!!!  
                //open the host  
                myHost.Open();  
            protected override void OnStop()  
                //shut down the host  
                if (myHost != null)  
                    myHost.Close();  
    And lastly, here is the App.Config file from my AddWinService:
    <?xml version="1.0" encoding="utf-8" ?> 
    <configuration> 
        <system.serviceModel> 
            <client> 
                <endpoint address="net.tcp://localhost/SimpleAdd" 
                                    binding="netTcpBinding" 
                                    contract="SimpleAdd.IService" 
                                    name="netTcpBinding_IService" /> 
            </client> 
            <services> 
                <service name="SimpleAdd.Service" 
                                 behaviorConfiguration="SimpleAddMEXBehavior">  
                    <!-- Enable the MEX endpoint --> 
                    <endpoint address="mex" 
                                        binding="mexTcpBinding" 
                                        contract="IMetadataExchange" /> 
                    <host> 
                        <!-- Need to add this so MEX knows the address of our service. --> 
                        <baseAddresses> 
                            <add baseAddress="http://localhost:8731/Design_Time_Addresses/SimpleAdd/Service/" /> 
                        </baseAddresses> 
                    </host> 
                </service> 
            </services> 
            <behaviors> 
                <serviceBehaviors> 
                    <behavior name="SimpleAddMEXBehavior">  
                        <serviceMetadata httpGetEnabled="true" /> 
                    </behavior> 
                </serviceBehaviors> 
            </behaviors> 
        </system.serviceModel> 
    </configuration> 
    So, where have I gone wrong?
    Rod

    Hello Richard,
    Well, I've tried making the change to the MEX point for net.tcp, but now when I try to start the service I get the following error in the event log:
    Service cannot be started. System.InvalidOperationException: Service 'SimpleAdd.Service' has zero application (non-infrastructure) endpoints. This might be because no configuration file was found for your application, or because no service element matching the service name could be found in the configuration file, or because no endpoints were defined in the service element.
    I am sure the problem lies with what I've put into the app.config file.  My app.config file now looks like this:
    <?xml version="1.0" encoding="utf-8" ?> 
    <configuration> 
        <system.serviceModel> 
            <client> 
                <endpoint address="" 
                                    binding="netTcpBinding" 
                                    contract="SimpleAdd.IService" 
                                    name="netTcpBinding_IService" /> 
            </client> 
            <services> 
                <service name="SimpleAdd.Service" 
                                 behaviorConfiguration="SimpleAddMEXBehavior">  
                    <!-- Enable the MEX endpoint --> 
                    <endpoint address="mex" 
                                        binding="mexTcpBinding" 
                                        contract="IMetadataExchange" /> 
                    <host> 
                        <!-- Need to add this so MEX knows the address of our service. --> 
                        <baseAddresses> 
                            <add baseAddress="net.tcp://localhost/SimpleAdd" /> 
                        </baseAddresses> 
                    </host> 
                </service> 
            </services> 
            <behaviors> 
                <serviceBehaviors> 
                    <behavior name="SimpleAddMEXBehavior">  
                        <serviceMetadata httpGetEnabled="false" /> 
                    </behavior> 
                </serviceBehaviors> 
            </behaviors> 
        </system.serviceModel> 
    </configuration> 
    I've also tried using this for the <client> tag under <system.serviceModel>:
    <client> 
       <endpoint address="net.tcp://localhost/SimpleAdd" 
             binding="netTcpBinding" 
        contract="SimpleAdd.IService" 
        name="netTcpBinding_IService" /> 
    </client> 
    But that gives me the same error in the event log.
    So, what have I done wrong now?
    Rod

  • When updating my iphone 4s to the new ios 6, it lost all data including photos, contacts etc. itunes now cannot find previous back up. Is there anyway i can get this lost data

    when updating my iphone 4s to the new ios 6, it lost all data including photos, contacts etc. itunes now cannot find previous back up. Is there anyway i can get this lost data

    rebeccakhwar17 wrote:
    Hi
    Can anyone help me please. I've recesally had to take my Iphone to be repaired before I. took my phone i backed up my data into Icloud and when i got my new phone I have lost all my contacts and photos.
    Restore the iPhone from your backup.
    See this -> http://support.apple.com/kb/ht1766
    Then make sure you sync everything to your computer so you do not lose it.

  • HT201272 I had to download and pay for the upgraded version of Song Pop TWICE !! I don't like having to do that... I could not find anywhere on the phone where it gives you the option to restore previous purchase...

    I would like to get a credit to my account for the 1.99 I have had to spend twice to purchase the Song Pop version that is upgraded. I am sure you can check my account and see that I have purchased it twice.

    We are all itunes users just like you.  no one here can check your account.
    Here is how you redownload past purchases:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Need help in finding the root cause the error 'Could not find function:'

    Hi fokls,
    In my workflow notification , when I click on the notification to process it , it says ' 'Could not find function:' error.
    I found the this message is coming out from the Fnd_new_messages table from the message_name 'FND_FUNCTION_NOT_FOUND'.
    Here are my questions ...
    1. FND_FUNCTION_NOT_FOUND - Is it a oracle Seeded message ?
    2. If so the error I am getting is a oracle product Bug ?
    And In between , I am getting this error for few transaction only. ( out of 100 , i am getting this error at the rate of 5 per 100 ... or less)
    3 .If its a oracle product bug then , how is 95 out of 100 transaction are succssfully wokring ?
    4. If is a custom bug , how it os not though for some other 95 transaction ?
    5. Can I expect it as Data issue ? If so what kind of data issue.
    Folks , any kind of info will be really , realy helpful for me ... please let me know your inputs for me.
    Thansk to all in advance
    Raghu

    In the error message 'Could not find function:' after colon what function name it is giving.
    'FND_FUNCTION_NOT_FOUND' is a seeded message only.
    As you are saying the error was throwing only for 5% or less notifications, is the error throwing for same kind of notifications? I mean the item type and message are same for these erroneous notifications?
    It can be that some function in particular type of workflow is error-ed out does not exists, when responding to those kind of notifications it might be throwing error.
    Please check that.
    Edited by: sarojak on Nov 12, 2010 6:16 AM

  • Exchange 2010 Free busy not working from remote site to main site "exception message is: Could not find a base address"

    Hi all , I have an exchange 2010 SP 2 environment with 2 sites , the remote site FL free busy has NEVER worked and I get this error on the remote site , is this related ?
    thanks 
    Log Name:      Application
    Source:        System.ServiceModel 3.0.0.0
    Date:         :
    Event ID:      3
    Task Category: WebHost
    Level:         Error
    Keywords:      Classic
    User:          SYSTEM
    Computer:      FL-CAS1.WOMBAT.LOCAL
    free bust works from WITHIN the remote (FL ) site , but NEVER to the main (WASH) site , it has Never worked ,I am thing that this error is related
    thanks I have no idea how to fix 
    Description:
    WebHost failed to process a request.
    Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/17256489
    Exception: System.ServiceModel.ServiceActivationException:
    The service '/EWS/exchange.asmx' cannot be activated due to an exception during compilation.  The exception message is: Could not find a base address that matches scheme http for the endpoint with binding CustomBinding. Registered base address schemes
    are [https].. ---> System.InvalidOperationException:
    Could not find a base address that matches scheme http for the endpoint with binding
    ++++

    Hi 
    This issue could be with corruption in  Autodiscover and web services virtual directory 
    Replace Web.config file for Autodiscover and web services virtual directory from the other working site
    Delete and Recreate  Autodiscover and web services virtual directory 
    Do this only  on the affected site 
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • I was typing a n e-mail to my friend. I put the iPad down to answer the door and came back a few minutes later. The screen had gone blank and when i tried to get the message that i was typing back I could not find it. It was a lot of typing and pictures.

    I was typing an email to friend. I put the ipad down to answer the door and came back a few minutes later and the screen had gone blank and when I tried to get the message that I was typing back I could not find it.  The message contained a lot of text and pictures.  How can I find it? I have looked in drafts.

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • I just downloaded more then 2000 photo's from my camera into iPhoto. Shortly after that my battery life was depleted and so I plugged the computer back into power and after I opened iPhoto later, I could not find those photos anymore

    I just downloaded more then 2000 photo's from my NIKON camera into iPhoto. Shortly after that my battery life was depleted and so I plugged the computer back into power and after I opened iPhoto later, I could not find those photos anymore!! Help where are they? How can I retrieve them or are they lost???
    Please help me!!!

    Do you see more photos, when you enable "Hidden Photos" in the "View" menu?
    And that was afetr I took the connection with the NIKON out of my laptop.
    Check, if you really imported into your iPhoto library - is the preference setting "Advanced > Importing: Copy items to the iPhoto Library" active?  If not, connect your Nikon again - do you now see more photos?
    If you imported into the iPhoto Library, check inside the package:
    Select your iPhoto library in the Finder, ctrl-click it, use the command "Show Package Contents".
    There will be a folder named "Masters" inside, with subfolders named by year - month - day. Look for the date you did the import and check, if the photos are inside.
    If yes, copy this folder to a folder on your desktop to save the photos.
    If not, search for a folder "Importing" inside the library. Is it there? Then copy these photos to a folder on the Desktop.
    If you found your photos, backup and rebuild your library.
    See Old Toad's post here:  Rebuild iPhoto Version 11

  • HT3275 I've 1.85TB empty space on my time Machine, but it only backs up to the beginning of the previous month. it should have weekly back-ups for every month before that. Any ideas why it deletes stuff older than a month?

    I've 1.85TB empty space on my Time Machine, but it only retains back-ups to the beginning of the previous month. I should be able to access weekly back-ups for every month before that until the disk is full. Any ideas why it deletes stuff older than a month?
    Thanks, Rigby.

    If you are using Ethernet to connect your Mac to the Time Capsule, are you allowing at least 2-3 minutes for Time Machine to fully load when you open the application to see your backups?
    If you are using wireless to connect, you may need to allow 8-10 minutes or longer for everything to fully load, depending on the speed of your wireless connection.
    If you see only white time "bars" on the timeline at the right of the screen, you are seeing temporary backups. Permanent backups are displayed with purple "bars".

  • I am constantly receiving an error message that says "Could not find a PPPoE Server." My wireless internet connection seems to working fine, I'm not having any issues. How do I get rid of this error message?

    A few weeks ago my computer had lost the connection to the wireless internet. I set it up again and was able to connect to the internet, however since then I've been receiving an error message "Could not find a PPPoE Server." I went back into Preferences and unchecked the PPPoE server option but the error message still pops up.
    Any idea how to fix it?

    In the Network pane of System Prefences, do you have duplicate services on the left column? When you "set it up again", you might have duplicated a service and both (the good working one and the previous that lost connection) might be trying to connect at the same time.

  • "Could not find the application that created this file" error when trying to combine files

    I am working with a user that is trying to combine a pdf & word doc (docx).  When they try to combine the files she gets the error:  "Could not find the application that created this file" & "Please select a file created by an application that resides on your computer".  The computer is running windows XP, with office 2010 SP1, & Adobe Acrobat Pro X.
    Per previous suggestions, I have already checked to see if Adobe PDFMaker is enabled as a Word plugin, and it is.
    Recentley the user was running Acrobat 6, and this error did not occur.  It is only after upgrading to Acrobat X that this is happening.  Any help with this issue would be appreciated.

    This can also be caused if the files are in a folder deep in the file system. For example C:/xxxxxxxxxxxxxxx/yyyyyyyyyyyyyyy/zzzzzzz/aaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbb /cccccccccccccccccccc/dddddddddddddddd/eeeeeeeeeeeeeeeeeeee/ffffffff/ggggggg/hhhhhhhhhhhhh hhhhhhhhhh/myPDF.pdf
    At some point Adobe PDFMaker cannot handle the path length (also, Windows can't handle the path length either eventually)
    Solution: move the files to a shorther path (perhaps the desktop) and try from there.
    I am filing a bug report with Adobe. A descriptive exception message should be thrown instead of "could not file the app.."

  • HT3275 For the past several days, I have been getting this message during backups: Time Machine could not complete the back up.  The backup disk image "Volumes/Data/iMac.sparsebundle" could not be accessed (error-1).

    For the past several days, I have been getting this message during backups:
    Time Machine could not complete the back up.  The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1).  When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.'  In addition, I cannot access previous backups any longer. 
    Help?

    See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
    http://pondini.org/TM/Troubleshooting.html

Maybe you are looking for

  • The lock and volume button's no longer work on my iPod Touch 3rd Generation?

    I've had my iPod Touch 3rd generation for about two years now, and have had hardly any problems with it... but now the lock button on the top of the ipod and the volume control button on the side of my ipod no longer work. Because the lock button won

  • HT1689 what is the "other" on my iPhone in the content use bar along the bottom of the screen when I sync my iPhone with iTunes on my computer

    When I sync my iphone and ipad to itunes on my mac, I have a yellow bar listed as "other" taking space on my phone. Is this something that can be cleaned up on the iphone to make the space it is using avail? I have deleted some photos, music and apps

  • H61MU-E35-B3 and smart fan....minimum fan speed

    Hi, I installed a core i3 2100 to this board. My cooler is a Scythe Grand Kama wich cames with it's own fan. I set smart fan to target:50° and minimum speed of "0". Even tough the temps idel way below 50° the fans rpm is always aroun 620. Why does it

  • Issue printing graphics...

    I have an issue with a single user account on a single computer at a client's place of business. When this user tries to print a PDF document, any graphics in the document come out very fuzzy or solid black. If this user logs onto the same computer a

  • IP address not correct

    So my difficulty is that my router does not show the IP address of my ISP it shows the IP address assigned by the router( I think). What I mean is I need the router to be identified by the 172(174?) address not the 10 one. Forgive me for my lack of u