HT3275 never ends to complete the first backup

After the initial setup time capsule never finished making the first backup. 40 Mb be wanting to complete the copy and hence does not pass.

No it is not normal.. it is completely wrong.
Stop the TM and start over.
Use the TC via ethernet.. that is required but turn off wireless to ensure the TC is the only network connected item.
Is your MacPro actually running Snow Leopard?
If so the firmware update may be the worst thing.
Do a factory reset of the TC and start over.
Has TM been used before with an external drive or something else.
I would recommend you do a full reset of TM if that is the case.
See A4 http://pondini.org/TM/Troubleshooting.html
Do a verify of the local disk. A5
Load the widget A1 to see what TM is actually on about.

Similar Messages

  • HT201250 I set up Time Machine yesterday (using a WD 2T drive) and got the message that the first backup was complete.  I can open every file I try except Quicken and TurboTax.  What am I doing wrong?

    I set up Time Machine yesterday (using a WD 2T drive) and got the message that the first backup was complete.  I can open every file I try except Quicken and Turbotax.  What am I doing wrong?

    burgessiii22 wrote:
    Thanks for the answer Linc, but how do I check to make sure the back-up process is working if I don't think I need to restore?
    Create a test file with Text Edit (or any other program) and save it to your desktop.
    Run Time Machine from the menu bar.
    When the Time Machine icon in the menu bar stops spinning, drag your test file to the trash.
    Open Time Machine and go back 1 page. You should see your test file on the desktop.

  • How comes that, having everybody issues with infinitely long backups (combining mountain lion on new imac and time capsule) apple doesn't fix it? (my time machine forecasts not less than 6/8 days to complete the first one, 350 gig transferred from a pc,).

    Within 6 days someone will switch off the machine, or power will go off, or some error will occur. I will have a backup when I'll have to replace this new Imac....

    Always do the first backup at least over ethernet.. even if you have to use the TC in complete isolation from the network. You should be able to do that backup in about 6-8hours, ie overnight.
    The setup is easy.. in complete isolation.. if you have no ethernet from the imac.. just use a short patch lead.. plug LAN port of the TC into the iMac. Turn off wireless in the imac. Make sure the airport utiity can locate the TC, if not press reset on the TC and it will go back to router mode.. ignore all the errors .. just locate the hard disk is working.. start up TM and point it to the TC.. do the backup.
    Once this backup is done.. the hourly incrementals over wireless should take just a couple of minutes. Although if you are manipulating very large files then you may need to consider getting better connection, either using 5ghz wireless which is much faster but might need extender.. or ethernet or ethernet over power type adapters.

  • Time Machine says it will take months for the first backup.

    Time Machine said it would take over a month for the first backup on my new Mac. I figured it would get its act together overnight, but when I got up this morning, it said 160 days.
    Here are my specs:
    Mac mini 2.3 GHz Intel Core i5 (Macmini5,1)
    2 GB RAM, 500 GB internal HD
    Mac OS X 10.7.2 (current on updates)
    1 TB Seagate
    Connected through FireWire 800
    614.32 GB available
    Disk Utility verifies there are no problems
    I used the same drive for Time Machine on the Power Mac with no problems. And it's communicating fine with the Mac mini -- I transferred all of my music, photos, applications, and other documents very quickly. Spotlight has finished indexing -- there is no dot in the magnifying glass in the upper right corner of the screen. Activity Monitor looks normal. Right now, the CPU is between about 70 and 95% idle, inactive memory is about 225 MB, and page outs are at 148 KB.
    I started Time Machine again an hour or so ago, and it said "About 3 days" right at first, but the number is going up quickly. It isn't completely stuck -- the number of items is slowly going down and the MB backed up is slowly going up (not as quickly as the number of days is going up).
    Right now, it says, "Backing up 760,527 items" and "81.4 MB of 222.37 GB – About 104 days."

    Benjamin McDaniel wrote:
    Disk Utility verifies there are no problems
    Did you run Repair Disk on your backups, and Verify Disk on your internal HD, and both said " . . . appears to be OK"?
    If so, Spotlight may be indexing your backups (Lion re-indexes everything, and that may not show the dot in the Spotlight icon).
    A clue may be lurking in your logs.  Use the widget in #A1 of  Time Machine - Troubleshooting to display the backup messages from your logs.  See if there are repeated "indexing" messages.  If so, the index may be damaged.  See the pink box in #D2 of the same link.

  • I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. What do I do?

    I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. So when I want to download apps I have to sign in with apple id but I can't so I made a new one, However I can't seem to be able to delete the old one. What do I do?

    You can't merge Apple IDs.  You also can't cancel (delete) and existing ID, you can only choose to stop using it.
    If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance.  Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’.

  • Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated.  How do I get rid of the list after they've been updated?  In the previous version I did not have an annoying permanent list.

    Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated.  How do I get rid of the list after they've been updated?  In the previous version I did not have an annoying permanent list.

    iOS 7 allows you to have your apps update automatically. Therefore, the list of what has been updated stays so that you can see what was updated, when and what the release notes say. It has been suggested that they list has a limit, much like Recents. Currently, there is no way for the user to delete the entries manually. Just try not to look at them.

  • When I use Adobe Send the screen goes dark when I hit send but never seems to complete the send task! and recover the screen.F

    when I use Adobe Send the screen goes dark when I hit send but never seems to complete the send task! and recover the screen?F

    Hi frank at luray,
    Does this issue occur with any file that you try to send, or do you find that it's specific to one file? If it's a file-specific error, and the file is large, please try sending the file via Adobe SendNow. (You can sign in to Adobe SendNow at Sign in or create an account | Adobe SendNow using the same credentials you use to sign in to Adobe Send.)
    Please let us know how it goes.
    Best,
    Sara

  • BACKUP failed to complete the command BACKUP DATABASE. Check the backup application log for detailed messages.

    Hi,
    We have a back up that is failing.
    The error is "BACKUP failed to complete the command BACKUP DATABASE RPS. Check the backup application log for detailed messages.".
    As I understand it the backup application log is at C:\Program Files\Microsoft SQL Server\MSSQL.2\MSSQL\LOG. From that all I get is
    2014-03-05 14:49:29.41 Backup      Error: 3041, Severity: 16, State: 1.
    2014-03-05 14:49:29.41 Backup      BACKUP failed to complete the command BACKUP DATABASE myDb. Check the backup application log for detailed messages.
    The command I am using is
    BACKUP DATABASE [MyDb]
    TO  DISK = N'D:\Domains\SQL_Backup\DB\myDb\Mydb_FullBackup_20140305_1100.bak'
    WITH NOFORMAT, NOINIT,  NAME = N'mydb-Full Database Backup', SKIP, NOREWIND, NOUNLOAD,  STATS = 10
    GO
    The database is Microsoft SQL Server Standard Edition (64-bit) Version 9.00.1399.06.
    The computer is Windows server 2003 R2 Standard Edition SP2
    The Db is 191 Gb and there is 227 Gb available on the D drive where it's being backed up to.
    Any thoughts as to how I can track down the problem.
    Is the 227Gb of spare disk space big enough to back up a 191 Gb database?
    If not how much is needed?
    Thanks

    Hello,
    Can you apply latest service pack .I dont know but guess that can be issue.Once faced ,not quite sure.Also can you just make your command like
    BACKUP DATABASE [MyDb]
    TO DISK = 'D:\Domains\SQL_Backup\DB\myDb\Mydb_FullBackup_20140305_1100.bak'
    WITH NOFORMAT, NOINIT, STATS = 10
    GO
    Just a simple one .Is backup failing immediately or after some time .Error is not so helpful as it does not shows any information
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • BACKUP failed to complete the command BACKUP LOG

    Getting BACKUP failed to complete the command BACKUP LOG qoemetrics for our Lync Server 2013 SQL 2012 mirror. No backups defined on mirror. Any ideas?

    BACKUP DATABASE [rtcxds] TO  DISK = N'B:\Backups\rtcxds_backup_2014_01_22_085201_7525216.bak' WITH NOFORMAT, NOINIT,  NAME = N'rtcxds_backup_2014_01_22_085201_7525216', SKIP, REWIND, NOUNLOAD,  STATS = 10
    GO
    BACKUP DATABASE [rtcshared] TO  DISK = N'B:\Backups\rtcshared_backup_2014_01_22_085201_7575240.bak' WITH NOFORMAT, NOINIT,  NAME = N'rtcshared_backup_2014_01_22_085201_7575240', SKIP, REWIND, NOUNLOAD,  STATS = 10
    GO
    BACKUP DATABASE [rtcab] TO  DISK = N'B:\Backups\rtcab_backup_2014_01_22_085201_7625117.bak' WITH NOFORMAT, NOINIT,  NAME = N'rtcab_backup_2014_01_22_085201_7625117', SKIP, REWIND, NOUNLOAD,  STATS = 10
    GO
    BACKUP DATABASE [rgsconfig] TO  DISK = N'B:\Backups\rgsconfig_backup_2014_01_22_085201_7665100.bak' WITH NOFORMAT, NOINIT,  NAME = N'rgsconfig_backup_2014_01_22_085201_7665100', SKIP, REWIND, NOUNLOAD,  STATS = 10
    GO
    BACKUP DATABASE [rgsdyn] TO  DISK = N'B:\Backups\rgsdyn_backup_2014_01_22_085201_8005299.bak' WITH NOFORMAT, NOINIT,  NAME = N'rgsdyn_backup_2014_01_22_085201_8005299', SKIP, REWIND, NOUNLOAD,  STATS = 10
    GO
    BACKUP DATABASE [cpsdyn] TO  DISK = N'B:\Backups\cpsdyn_backup_2014_01_22_085201_8045296.bak' WITH NOFORMAT, NOINIT,  NAME = N'cpsdyn_backup_2014_01_22_085201_8045296', SKIP, REWIND, NOUNLOAD,  STATS = 10
    GO
    BACKUP DATABASE [xds] TO  DISK = N'B:\Backups\xds_backup_2014_01_22_085201_8095321.bak' WITH NOFORMAT, NOINIT,  NAME = N'xds_backup_2014_01_22_085201_8095321', SKIP, REWIND, NOUNLOAD,  STATS = 10
    GO
    BACKUP DATABASE [lis] TO  DISK = N'B:\Backups\lis_backup_2014_01_22_085201_8135340.bak' WITH NOFORMAT, NOINIT,  NAME = N'lis_backup_2014_01_22_085201_8135340', SKIP, REWIND, NOUNLOAD,  STATS = 10
    GO
    BACKUP DATABASE [mgc] TO  DISK = N'B:\Backups\mgc_backup_2014_01_22_085201_8185450.bak' WITH NOFORMAT, NOINIT,  NAME = N'mgc_backup_2014_01_22_085201_8185450', SKIP, REWIND, NOUNLOAD,  STATS = 10
    GO
    BACKUP DATABASE [LcsCDR] TO  DISK = N'B:\Backups\LcsCDR_backup_2014_01_22_085201_8225412.bak' WITH NOFORMAT, NOINIT,  NAME = N'LcsCDR_backup_2014_01_22_085201_8225412', SKIP, REWIND, NOUNLOAD,  STATS = 10
    GO
    BACKUP DATABASE [QoEMetrics] TO  DISK = N'B:\Backups\QoEMetrics_backup_2014_01_22_085201_8265396.bak' WITH NOFORMAT, NOINIT,  NAME = N'QoEMetrics_backup_2014_01_22_085201_8265396', SKIP, REWIND, NOUNLOAD,  STATS = 10
    GO
    BACKUP DATABASE [ReportServer] TO  DISK = N'B:\Backups\ReportServer_backup_2014_01_22_085201_8315433.bak' WITH NOFORMAT, NOINIT,  NAME = N'ReportServer_backup_2014_01_22_085201_8315433', SKIP, REWIND, NOUNLOAD,  STATS = 10
    GO
    BACKUP DATABASE [ReportServerTempDB] TO  DISK = N'B:\Backups\ReportServerTempDB_backup_2014_01_22_085201_8355531.bak' WITH NOFORMAT, NOINIT,  NAME = N'ReportServerTempDB_backup_2014_01_22_085201_8355531', SKIP, REWIND, NOUNLOAD,  STATS = 10

  • First timer.  Just installed Time Capsule.  The first backup looks like it will take two days at the pressent speed.  Can I close MacBook Pro and have first back up  continue, and can I unplug and plug in at work without affecting the backup?

    I'm a first timer on this (or any) help site. I just installed Time Capsule.  The first backup looks like it will take two days at the present speed.  Can I close MacBook Pro and have first back up continue, and can I unplug tomorrow and plug in at work without affecting the backup?

    Hi Oneinspirit,
    Time Machine backups can be paused by choosing "Stop Backing Up" from the Time Machine icon on the right hand side of your menu bar ( ). Once you're ready to resume the backup, you can choose "Back Up Now" from the same icon.
    Start a backup: Click the Time Machine icon  in the menu bar, then choose Back Up Now.
    Pause a backup: Click the Time Machine icon  in the menu bar, then choose Stop Backing Up.
    OS X Yosemite: Start, pause, and resume a Time Machine backup
    http://support.apple.com/kb/PH18851
    All my best,
    Allen

  • Time Capsule and Time Machine: How can I force Ethernet Connection for the first backup ?

    Hi,
    How can I force the Time Capsule - Time Machine Couple to communicate via an Ethernet cable for the initial backup without changing the wi-fi configuration of the Time Capsule?
    I do not want to change the wi-fi configuration of the TC because it appeared that I was not able to restaure it proprerly after a first "ethernet backup".
    Please note that I do not want to use my TC to extend my wi-fi network nor create a new one. But, when I disable the wi-fi on the TC, as I want to restaure it, I only can see "expend" or "create a network" options within the wirless config page of AirPort Utlity; "Connect to a network" is not shown in the list!
    Thx a lot for your attention,
    François
    MBP 15' mid-2010
    OS X 10.8.2 (12C54)
    Time Capsule end-2011 (2TB - v7.6.1)

    You MUST change the TC mode to something other than join a wireless network.. because in that mode, TC turns off the ethernet ports. 
    The join a wireless network is hidden option because apple do not support it and it works poorly.
    You can access it by holding down the option key.
    You can also save the current settings and restore them after you finish the ethernet backup.
    Please note using join means double hop wireless and your TC data speed to the Mac will be extremely slow.. this will also affect your other internet connections and any other computers on the wireless network as it will use most of the capacity for much longer period than directly connecting to the TC.
    Basically that is why Apple do not support it.. it is lousy way to work a TC in a network.

  • HT5927 im trying to update my iphone 4 and in order to complete the restore backup from itunes i need to turn off the find my iphone on the iphone but i cant get passed the restore backup stage - what should i do?

    I'm trying to update my iphone 4 and in order to compelte the restore backup from itunes i need to turn off the 'find my iphone' but i cant get passed the restore backup stage - what should i do?

    Hi beckiewinter!
    I have some information for you that may help you understand your iPhone's Activation Lock more thoroughly:
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    So in order to update your iPhone, you may need to turn off Find My iPhone. This can be done through the iCloud settings, and more information on those settings can be found right here:
    iCloud - iPhone User Guide
    http://help.apple.com/iphone/7/#/iph3c79652c
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • I cant get past the first backup with time machine!

    I have been using my iMac Os X 10.5 happily since 2008, but over the last months I have been getting the SBBoD more and more often. Since I have never used time machine before, i.e never done a backup (at this mac, I know its smart and how its done, I'm was just lazy and out of HDs) I feel my time is running out! I configured a brand new WD Elements external HD (2 terrabit, USB 2.0) in time machine, and everything goes smooth untill time machine aborts the backup due to some error. Please help, I am in desperate need of a backup!

    heres my crash log from last time. It changes a bit from time to time though.
    Starting standard backup
    Backing up to: /Volumes/uten navn/Backups.backupdb
    Event store UUIDs don't match for volume: 
    No pre-backup thinning needed: 307.59 GB requested (including padding), 1.80 TB available
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/460.icns to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/910.icns to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/CLJ3000.icn s to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/CLJ3800.icn s to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/cljCM6040mf p.icns to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/cljCP6015.i cns to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/DJ3900.icns to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/DJ5400.icns to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/DJ5900.icns to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/DJ6940.icns to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/DJ6980.icns to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/djD1500.icn s to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/DJD2300.icn s to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/djD2400.icn s to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/djD2500.icn s to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Support/hp/hppa/Plugins/ConfigurationPage.plugin/Contents/Resources/djD4200.icn s to (null)
    Error: (-36) SrcErr:YES Copying /Library/Application Su
    the one before that:
    Starting standard backup
    Backing up to: /Volumes/uten navn/Backups.backupdb
    Ownership is disabled on the backup destination volume.  Enabling.
    Event store UUIDs don't match for volume: 
    Backup content size: 443.4 GB excluded items size: 168.1 GB for volume 
    No pre-backup thinning needed: 330.36 GB requested (including padding), 1.82 TB available
    Waiting for index to be ready (909 > 0)
    Error: (-36) SrcErr:YES Copying /Applications/Safari.app/Contents/WebApplicationCore.bundle/Contents/MacOS/WebA pplicationCore to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Sibelius 5.app/Contents/Components/Arrange Styles/2Fam(Block)Ww+hppnoperc.sar to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Sibelius 5.app/Contents/Components/Arrange Styles/2Fam(Block)Ww+strings.sar to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Sibelius 5.app/Contents/Components/Arrange Styles/SolowithaccSolow.sar to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Skype.app/Contents/Resources/German.lproj/ProfilePanel.nib/keyedo bjects.nib to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Skype.app/Contents/Resources/GetContactsFromPalm.scpt to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Skype.app/Contents/Resources/HoldPressed_22x22.png to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Skype.app/Contents/Resources/Italian.lproj/CallPreferences.nib/de signable.nib to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Skype.app/Contents/Resources/Italian.lproj/CallPreferences.nib/ke yedobjects.nib to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Skype.app/Contents/Resources/Italian.lproj/CallViewB.nib/designab le.nib to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Skype.app/Contents/Resources/Italian.lproj/EULA.rtf to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Skype.app/Contents/Resources/Italian.lproj/Localizable.strings to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Skype.app/Contents/Resources/Italian.lproj/MainMenu.nib/classes.n ib to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Skype.app/Contents/Resources/Italian.lproj/MainMenu.nib/keyedobje cts.nib to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Skype.app/Contents/Resources/Italian.lproj/ProfilePanel.nib/keyed objects.nib to (null)
    Error: (-36) SrcErr:YES Copying /Applications/Skype.app/Contents

  • MacBook Pro won't start after I completed my first backup using TimeMachine

    Hello,
    My MacBook Pro won't restart after I did my first TimeMachine backup.  I tried in SafeMode but no luck.  My MacBook Pro is a 2009 early version running Snow Leopard.  Please help.
    Thanks,
    Serey

    I have managed to get into my computer through the OS X install disk but now my wi fi hardware is gone. Ie no airport.
    When I try to re install the airport extreme wi fi base station software  it tells me it can't be installed as this version of Mac OS X (Lion) on is volume is not supported.
    Not even an Ethernet cable gets me on line. In system preferences when I do a network diagnostic all I get is the spinning disk. Again, any ideas how to get around this?
    Thanks

  • Error when performing the first backup using RMAN

    I have installed Oracle 10g on a new server and created a fresh database.
    I set up the backup to the disk using OEM and tested the credentials in OEM. The database is in noarchivelog mode. I created settings for an immediate backup and when I submitted the job, I got the following error. What can be the reason?
    500 Internal Server Error
    java.lang.NullPointerException
         at java.util.Hashtable.put(Hashtable.java:393)
         at oracle.sysman.eml.jobs.JobsController.checkJobExists(JobsController.java:194)
         at oracle.sysman.eml.jobs.ResultsController.prepareData(ResultsController.java:124)
         at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:389)
         at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:688)
         at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:291)
         at oracle.sysman.eml.app.Console.doGet(Console.java:285)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
         at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:151)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:282)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)

    user4459361 wrote:
    I have installed Oracle 10g on a new server and created a fresh database.
    I set up the backup to the disk using OEM and tested the credentials in OEM. The database is in noarchivelog mode. I created settings for an immediate backup and when I submitted the job, I got the following error. What can be the reason?
    500 Internal Server Error
    java.lang.NullPointerException
         at java.util.Hashtable.put(Hashtable.java:393)
         at oracle.sysman.eml.jobs.JobsController.checkJobExists(JobsController.java:194)
         at oracle.sysman.eml.jobs.ResultsController.prepareData(ResultsController.java:124)
         at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:389)
         at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:688)
         at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:291)
         at oracle.sysman.eml.app.Console.doGet(Console.java:285)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
         at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:151)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:282)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)If the database is in the open stage and is in the noarchivelog mode, RMAN wouldn't be able to do the backup since the database is inconsistent and there are no archivelogs to make the backup usable in the case of recovery. If yes, bring the DB in the stage and then try to do the backup again and I would suggest to practice RMAN using the command-line interface. It's much better to diagnose the error messages appearing there rather than EM which adds it's own messages as well with RMAN.
    HTH
    Aman....

Maybe you are looking for

  • Hw to skip first field of input file in ctl file and map other fields- cols

    I need to write a ctl file where in my input file has 3 fields by comma separated. My table has 2 columns. In my ctl file I am using LOAD INFILE * TERMINATED BY ',' COL1 need second field in the file COL2 need third field in the file Not sure how to

  • What should be the directory structure for new theme

    I want to create a new theme for my BSP pages. Currently all my BSP are using /sap/public/bc/ur/Design2002/themes/sap_tradeshow/ur/ur_ie6.css for styling. I want to create a new theme named testTheme and want to call my bsp pages with sap-themeRoot=t

  • Order of streaming images in iPhoto on the iPad

    I would like to know if there is a way to set the order of the photos in photo stream using iPhoto on my iPad. It seems the default view is to have them go from oldest to newest. With a 1000 photos that is a lot of scrolling and why I would want to s

  • Play one song then stop

    I'm trying to find a way for a 25 foot tall sculpture of Elvis standing in a jukebox to play one Elvis hit song randomly by being activated by a motion detector. Can the iPod Shuffle be activated to play just one song, then stop or turn off. Then be

  • Itune library disappears from another location

    I created itune library when I was logged in at office. I brought my computer home and that itune library is not available anymore. Do I need to do any firewall , subnet etc settings. I am novice, please send me step by step instruction. I am using t