HT3371 When I plug in the computer to charge, the light is green for a minute and then turns red and the plug gets very hot. It's not the plug as it works on other computer. Why won't my computer charge?
When I plug in my MacBook Pro to charge, the light is green for a minute and then it turns red and the plug gets very hot. The plug works fine on another computer and charges it. Why won't my MacBook Pro charge?
You performed all of the steps outlined in this link?
http://support.apple.com/kb/TS1567
You uninstalled and reinstalled iTunes?
GB
Similar Messages
-
I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading. -
my time capsule stopped working. When I try to power it up the amber light comes on for about 10 seconds and then turns off. That's as far as it gets. Any ideas on how to solve this problem.
Kazandjaz, Welcome to the fourm! There is a 99.5% chance that your problem is caused by a failed internal power supply unit (PSU)! If you have operated it for about 18 months or so, that is the cause. Take it to your nearest Apple dealer and ask them to check it out.
-
I got this just last month for my birthday and it has been doing it since I got it
Try a reset or restore
-
When using my power adapter, the light is green for a two seconds and turns red.
When using the power adapter for my MacBook 2.1, the little light on the connector is green for 2 or 3 seconds and then turns red. I bought a new adapter, but it is the same thing. It looks like the computer is charging. What's wrong with it.
Nothing wrong. Here is what Macbook manual has to say:
When you first connect the power adapter to your computer, an indicator light on the
power adapter plug starts to glow. An amber light indicates that power is going to the
battery. A green light indicates that no power is going to the battery, which can mean
the battery is fully charged, is not installed, or has a problem. If you don’t see a light,
your plug probably isn’t seated correctly. Check for any debris and remove it. You can
monitor the battery level using the Battery status menu in the menu bar or by
checking the battery level indicator lights on the bottom of the battery (see page 74). -
When I close my lid to make the computer sleep and I open it back up again when I am ready to use it the screen turns on and then turns black. I have to press random keys to make the screen show again. Any help is greatly appreciated!
First, before you sleep your MBP, make sure you either scroll down the Apple menu to sleep your machine, or do it even more easily by pressing CMD-OPTION - DiskDrive (upper right hand corner of your keyboard). I wouldn't just close your machine to let it sleep.
It's hard to know exactly what's happening, but here are a few pointers.
1. Go to System Preferences/Energy Saver and make sure you've set a sleep time of more than two or three minutes. Your machine may be trying to sleep too early. In the same preferences, set Computer Sleep to more than ten minutes, to make sure you don't get an unintentional sleep.
2. Take a look for third-party applications you might have installed.
Post here with your results! -
Macbook Air isn't a year old and I don't leave it plugged in ever. The battery might last 2 hours and gets very hot. In addition the fan runs at a very high speed. The computer won't shut down in a normal way. I have to hold the power button down to shut it off. Can someone suggest something please.
Thanks.Runaway applications can shorten battery runtime
-
my iphone was charging and then turned off and vant get it back on and tried resetting it with the home button...what can i do??
iPhone User Guide
Try this...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On... -
ok my phone was wet in a pool did the rice thing and then dryed it and it comes on when plugged to the wall. it says to connect to itunes and when I try to plug it to my computer on itunes it shuts off? help what should I do:(
Connect to iTunes alert (picture of iTunes logo and USB connector) - iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode
If it still won't do anything, make an appointment with Apple and be prepared to get a refurbished phone at out of warranty prices.
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone $149 -
My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black. I turn it off and then on again and the start up noise goes but it is still black - Help!?
Claire, please post your machine specs as requested. There are some variants of the MBP with specific hardware issues. Example: the older "silver key" MBPs with 2.2Ghz and faster processors can have a defective video chipset that produces a black screen or distorted video. That problem is covered under an Apple program that will fix this at no cost to you if you computer is that model.
Do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info..." button. That launches System Profiler for you. The first screen looks like this:
The second line, "Model Identifier" (or "Machine Model" if you are running OS10.4) precisely identifies your MBP variant. Post that, and include it in your equipment info in your profile for future posts. That means people don't have to ask, and you get faster help that is targeted to your specific model. Saves everybody a bunch of keystrokes and you get better advice. -
Recently updated Itunes to 10.7 and when I try running it, it ends up freezing my computer and never opening. I uninstalled it and then reinstalled it, and the same thing has happened. I don't know what to do.
I am experiencing the same issue , feels very annoying . By the way I using a Windows system but that should not matter.
-
when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?
Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Hold alt or option key at bootup, do asny boot choices show up? -
Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. Have tried power button and home button but no change ,When connected to mac get message that phone is in recovery mode and that i must restore this phone before it can be used with iTunes . Is this my last resort as I have some photoessays I don't want to loose.
PPlease helpHello, Chantal105
Thank you for visiting Apple Support Communities.
If your device is in recovery mode you will need to restore the device.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Jason H. -
Why won't my computer pick up the wireless in my home? All other computers in my home can get the internet.
Turn Off your computer. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your computer. Hopefully it will see the WiFi.
Cheers, Tom -
i set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same apple ID). how do i consolidate the two users on my new mac book?
Well if you use the Finder Go menu to Computer, a window opens up double click on your boot drive and then on Users folder, open the other user folder and open Public and drop your files into DropBox
When you do this it will copy them and change the permissions and user assigned to it, so log into the other user and place them into your respective normal folders.
Once you have all your files over and don't need the old user, use System Preferences > Accounts to delete it if you wish, however it's good two Admin accounts on the machine in case something bad happens in the other. Some people for security reasons on use a Standard account for most uses and a emergency Admin account.
One can still do most Admin things in Standard user.
Maybe you are looking for
-
HT1296 how to download in english the itunes
my ipod was disabled and i download itunes in my computer , after i download the languages came out is arabic..please help me to changes the language
-
HT4889 can I choose which applications to transfer with migration assistant?
I do not want to transfer all my applications from my old Mac Book Pro. (like Toast or DVD Studio since there is no DVD burner and other apps that I don't use) Is there a way to customize the transfer to pick just the Applications I want using Migra
-
Sound problerms with Adobe Photoshop Album slideshow
Years ago I created several brief .pdf slideshows that included both audio and video and saved them to a flash drive. I can still play these files but only the video portion. The audio no longer works. Is there a way to convert these slideshows to
-
Message No. VN108 while doing MB90
Dear All, While doing MB90 i got this error *No messages for initial processing exist* i have done SPRO setting for the same. Please give me the solution on this. Regards, Anant
-
I'm running leopard. On the login screen where I can see the users identified, I can scroll over each user and a small box pops up that shows each user's "short name," but doubleclicking on any user doesn't get me logged in. Same thing if I click on