HT3529 Can't activate I messaging on my iPad. I have gone through all the steps but can only receive can't send. Can anyone help please
Can't activate I messaging on my iPad. I have gone through all the steps but can only receive can't send. Can anyone help please
Hi sambanyc,
What version of Adobe Reader have you installed on your Mac?
Please try installing on a different Admin user account and check if that makes a difference.
Regards,
Rave
Similar Messages
-
I wanted to update my software this morning and it has turned into a nightmare. I continue to receive the error 1604, which is related to a usb port. I followed all the steps listed in support and nothing has helped. I just plugged in my printer cable to the usb port and it works fine, yet I continue to receive this error and can't use my phone!
A printer does not require power, and does not transfer large amounts of data. So that is not a valid test. It's like saying "if I plug a nightlight into an outlet it works fine, so why do 2 hair dryers on at the same time trip a circuit breaker?"
Are you using a port directly on the computer, and not a hub? If it's not a laptop and it has ports on front and back are you using a back port, which can supply more power?
Have you EVER used this computer to hack or jailbreak ANY iPhone (not necessarily the one with the problem? Or used a program to downgrade the version of iOS on any phone? -
I have written a book with the ibooks application and I have gone through the process of publishing it through itunes to the itunes book store. Everything seems to work and i get to the end of the process and get a big green check. However, what now? How do I check to see if it actually got through to the book store or not?
Thanks.Hi khicks48,
Welcome to the Support Communities!
The article below will explains the publishing process for the iBookstore:
Apple - iTunes - Partner Programs - Book Publishers
I hope this information helps ....
Have a great day!
- Judy -
Hello,
My sons old iPad 1 is rarely used, but, when i charged it up the message was; "iPad is disabled try again in 22,824,852 minutes" sorry but thats a bit of a wait!
I have gone through all the various reset methods but can't get around the disabled status??
Can't see another way to reset it.
Could it be for the bin.
Only wanted to give the youngest daughter the iPad to take to school.
Hope someone can help
Thanks
Jonny Burns.Is this how you do it?
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
How do I get iMessage to activate, I have read through all the instructions but it still says activation unsuccessful?
Are you using a supported carrier? Do you have a plan that permits text messaging?
The iPhone uses a 'silent' SMS message exchange with Apple's servers in the UK to activate. If you are not using a supported carrier, and/or your account is not provisioned properly for an iPhone, the activation may not be able to complete. -
I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes. I am totally computer useless - how can I get my ipod to work, please? Charles Jones.
You did install the latest iTunes (10.5) right? If the problem was that iTunes does not see the iPod try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
I updated my 4S phone to IOS 7.1.2 and lost my wi-fi. The wi-fi is on, but can't find ANY networks. I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 and lastly going to the Apple store for help. They tried all the exact same steps I did, took the phone apart and looked at and said it is in "pristine" condition. They have no idea why it isn't working, but they could offer to sell me another phone. This is extremely annoying! They claim it has nothing to do with the update to 7.1.2, but that is when I lost the wi-fi, so it has to be related!
My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again...
-
I have gone through all of the troubleshooting steps and still do not see my iPhone 4 (6.1.3) when I connect with USB to iTunes. Can anyone help?
I'd try removing and then re-installing iTunes. An uninstall will not remove your music etc. That should re-install the usb drivers etc. I don't think you can separately delete and install the drivers.
-
Getting error message on hp c4280 All in One printer when scanning. "USB not connected". Have gone through everything on HP help but reinstall of drivers. We have never been able to scan. Printing and copying are fine and have never been an issue. Can anyone help please?
So, is it connected via USB, or via Wifi/Airport?
-
forgot my icloud id and i can't activate my iphone 5. dialed 112 and followed all instructions but triple click not activating voiceover
Hello julian1000,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Apple ID: How to find your Apple ID
http://support.apple.com/kb/HT5625?viewlocale=en_US
Best of luck,
Mario -
HI Everyone,
FInally I got my AppleTV and connected it to my TV and network , sadly it took me hours until I succeed to activate airplay after finding out in some forum that I need to reset my network connections and the airplay icon will appear , happily it happend and I start looking for answers regarding the huge lag in mirroring stage ( which still huge problem that have to be solve after I will solve the airplay disappear issue) .
after 10 min the airplay icon disappear at my IPad and iPhone and even resetting the network connection is not helping , please please please some one help !!!Avielofer wrote:
BTW, it changing the wi-fi channel is necesary please explain how to do so.
It's not necessary, but is a good troubleshooting step. How to do so varies from brand to brand. Look at the manufacturers website, they should have a manual available that explains how to access the settings and change it.
Avielofer wrote:
The ATV connected to the routher via wi-fi , but both sitting on the same shelf.
In that case, I would strongly encourage you to connect them via a short Ethernet cable. The proximity of the two devices could be the culprit in the video quality issues. -
keyboard not recognised by Mac.
Try:
Troubleshooting wireless mouse and keyboard issues
and maybe:
OS X: Bluetooth devices become unresponsive -
why wouldn't they warn users that updating to ios 7 via wifi can cause a problem.
ive had the same with my wife phone, the phone provider wont help told me to go to apple, but they say because i did'nt buy from them go to where you bought which was my provider??
-
I have tried all posted means to restore default settings to my navigation toolbar. Are there other ways?
I was a strong supporter of Firefox until this happened. None of the fixes have worked...and besides why should I have to waste my time trying to fix it in the first place. I lost a lot of time and information with this situation and Firefox provides no support for itself that I can see. No...I've switched to Google Chrome and Firefox will have a serious uphill climb getting me back or preventing me from warning others off their product. FIREFOX HAS COST ME SEVERAL HOURS...NO...DAYS REPAIRING THIS DAMAGE. I won't be back!!!!!!!!!!!!!!!!! Thank god we still have the freedom to chose in this country...at least for now.
P.S. I hope Firefox goes the way of Netscape. I was once a supporter of their product too...but they blew it bad... -
I am trying to update my itunes and iphone. Everytime I trie comes out a message about 'key access'. I've done all the steps from the support and nothing worked out. I cannot unistall and now I can't open it anymore also. What should i do, please?
Isn't that only used when a PC will not boot?
What options does booting with this give me?
Thanks
JK MCP
Hi,
USB recovery disk was used to recover your system when it encounter problem. You can try to use it to fix your problem instead reinstall system. However, there is no method to keep your program whenreinstall system.
Roger Lu
TechNet Community Support
Maybe you are looking for
-
BDC: How to enter data in Table control (With wizard) using scrolling?
Using BDC, I am trying to enter the data in the table control (with wizard). I want to know what is the specific command to scroll down in table control (With Wizard). While recording I am getting these steps: SAPLCKBASCR1 0202 X
-
R/3 tables for the fields of 0fi_gl_40
How to find the r/3 tables for the fields of the datasource 0FI_GL_40.For example this datasource has ANLN1(Asset),ANLN2(Asset Subnumber) and AUFNR(Order) fields.Is there any tcode or table that gives the r/3 tables for the the fields of the above da
-
Export OLAP 11G AW/Cubes to OBIEE 11g
Hi Experts, If anyone has handled this assignment of exporting OLAP 11G AW/Cubes to OBIEE 11g, Please share all details. Currently we use BO for reporting requirements and before going ahead with OBIEE 11g would like to make sure there is not much of
-
Hi all, When i run the report FBL5N, I have well all the document types. But when i run F.27 Account Statement, the open item corresponding to the document type XE doesn't appear. Could you tell me where is it possible to customize the report F.27 ?
-
ESS: Address Make Telephone required field
Hello , I was trying make Telephone Number as required field in ESS - Webdynpro application, but i could not find the exact place. I was looking at the following DC: ess/per ess/us/addr, i just found the following code: fpm.raiseReviewAndSaveEvent(I