HT3576 When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??
When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??
One problem though, the top button on my phone is jammed so i cant power off the phone, anyway of resetting the phone without using the top button ?
Similar Messages
-
The problem seems to be that I keep getting an error when trying to update her library. I keeps telling me that she is set up on a different library, but I can`t figure out how to switch libraries.
This is getting quite frustrating, and I would appreciate help in figuring this out.
Thanks!!You could have multiple libraries on one computer and then hold the Shift key down when startng iTunes to choose which library to use.
Or you can have everything in one Library with organized media and apps using multiple Apple IDs.
Which would you choose? -
Help me!
Boot from your Mac install disc while holding down the C key so you can run Disk Utility.
The startup disk may need repairing.
Using Disk Utility to verify or repair disks -
I have joined adobe photoshop but the program shut down after just one minute, why? I cannot use it!
Without proper system information and other details nobody can tell you anything. If the program shuts down after a while then presumably it fails to verify your activation, so refer to this:
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?
Solved!
Go to Solution.What lead_org is referring to is commonly known as "re-balling" which involves unsoldering the Southbridge chip from the planar, replacing all (6-700) solder balls with new ones and then re-attaching it under heat/pressure.
This is the place that you need:
http://www.theboardroom.info/index.html
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?
This has been fixed. Answer is that I needed to go to "Apple Software Update" and repair it. (From my Control Panel).
-
After installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?
Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.
-
I just downloaded and installed elements 12 on my Windows 8 (yuck) notebook computer. When I log into Elements the program closes. I have not been able to get it to run. Any ideas?
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao. -
When trying to install Reader 9.2 updates it wants me to close applications that are using reader. There is nothing listed and no applications are running. Any ideas?
Make sure your browser is closed and check to see if there are any processes related to Acrobat still running. If you are using Windows, Control-Alt-Delete > Processes tab. Look for AcroRd32.exe or Acrobat.exe or Acrotray.exe and stop these processes from running before you try your update again. A good ol' computer reboot might do the trick for you too.
-
I've just bought an iPad 2 from the USA and my iTunes doesn't recognise it, so I can't register it and get started. iTunes works fine and recognises my 2 IPhone 4s. Any ideas how to overcome this ??
Hi lewansa,
Try resetting it: unplug it and then hold down the Home and Power buttons at the same time (nothing will be lost) until the Silver Apple appears (up to 30 seconds). Once the Home screen comes back up, see what it says your battery percentage is. Then try plugging it back in to see if it will continue to charge it up. It shouldn't take more than an hour to charge to 100% if you are charging via a wall socket.
Just to make sure - you are using the adaptor that came with the iPad, correct? Just checking....
Cheers,
GB -
Iphoto will not open. Says updating but no updates running. Any ideas?
Iphoto will not open on my Mac. Says updating but no updates running. Any ideas?
With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running? Is your profile correct?
what is the exact message you get when launching iPhoto?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive? -
While doing the backup via iTune, my contacts in iPhone AND iPad have been completely wiped out. They are still all available on my Address Book on my Mac. Any idea what happened and how to resolve this ?
Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
getting an error downloading itunes 64bit for windows 7. says there is a problem with the windows installer package. a program required for the install to be complete could not be run. any ideas? i uninstalled it last night when it would not open.
Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.) -
I downloaded an app on my MacBookPro(10.9.1) and I can't get it to synch onto my iPhone...any ideas(I click on install...it switches to "will install" but never gets to my iPhone)...thanks in advance
Your phone connected, iTunes running, under the "Apps" tab, you've selected this app to install on your phone, correct? Hit the "Apply/Sync" button, lower right on the Apps tab, what happens?
-
I recently bought mbp retina haswell 13. When i use it today suddenly my display went black....i dnt have any idea i try to press the power button then it gave beep sound. Then i press it for few seconds then it shutdown. I try to turn on again same result...plz anyone have solution for this ...help me
See Ogelthorpe's link:
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Maybe you are looking for
-
Parsing XML and Storing values in instance variable
hi, i'm new to XML. here i'm trying to parse an XML and store their element data to the instance variable. in my main method i'm tried to print the instance variable. but it shows "" (ie it print nothing ). i know the reason, its becas of the the end
-
How to get the value from one Popup lov column to another popup lov column
Hi, I am new to oracle apex development and having the below issue. In my application, there is a tabular form with 15 columns ( c1.. c15). I have to populate the value of column C5 based on the selected(from popup lov) value of column C3, tried to u
-
Hi, I have a Grid with a collapse Level =1; This however messes up the order of the other columns in the query. Is there a way to fix this? For example the first column is customer name and the second is Date. However the date is not in order when I
-
Add custom SAPUI5 apps to Fiori LaunchPad
Hi All, I have built a custom sapui5 application,which i need to add to the fiori launchpad.Can anyone suggest the steps to b followed to acheive this. Thanks in advance Regards, Thushar Tags edited by: Michael Appleby
-
Thunder Beta syntax error on transaction {}
There doesn't appear to be a separate beta forum, so I'm reporting this here. Testing the Thunder Beta, it reports the following as a syntax error: if (thing) { transaction { doStuff; EntitySave(item); It reports 'return stat