HT3659 My Soundtrack pro looses the mic on AJAKona. It will appear as an input only after clicking on New audio file, then ok, Recording alert appears and then I have my AJA KONA3g back as an input option. loose it again if I change track
My Soundtrack pro looses the mic on AJAKona. It will appear as an input only by clicking on New audio file, then ok, and an Recording alert comes up. But if I change track I loose the AJA again. How do I fix this?
Finally found the answer. The recording was done at 48, the audio/MIDI settings were set to 48, but the sampling setting on the export was not, causing everything else to break down. Once all three matched the export worked and the playback audio worked without opening the clip editing screen.
Similar Messages
-
I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.
Are you in the US? Order one from here: http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
Or check out Best Buy. -
Hi recently my MacBook pro has stopped connecting to our office Synology server automatically. I now have to Go > Connect to Server > etc in order to browse the file server. Clearing key chain and then readding everything hasnt made any difference. HELP
Not sure what other tests they could run for me. I've pretty much run all the tests I can using Drive Genius and Tech Tool Pro 5. Is there anything they use that I don't know about??
-
updated my phone to the new software lost all my music, pictures/videos and apps, how to i get everything back? someone help!
You should have been sycning them with your computer all along. Sync them from your computer back to the iphone.
-
I dropped my mac pro. The disc drive plays but will not record. medium drive error. How hard is it to replace the drive my self. i see screws on the bottom. Could I just order a new internal drive and replace it? Or is it too complicated for the average person? Would be cheaper to buy an external drive than to replace internal one? Any advice is appreciated
How certain are you the superdrive ONLY is at fault?
That depends on your skill level, if you grew up tearing things apart and putting them together, its absurd how easy it is.
For some however its too daunting. On a general skill level for the "average" person its about a 3 out of 10 in difficulty.
Can you order same? yes. -
Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
ThanksYour server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium -
Do I still have to save the PDF first in my file then retrieve it in Adobe and then convert?
When I receive a document do I first have to save it in my computer then go into abobe, then load it in there and then convert to a doc?
Hello,
1) Launch Adobe Reader X
2) Click on "Edit" on Meu Bar and click on "Preferences"
3) Go to the option "Internet" from left hand list
4) Make sure "Display PDF in Browser is checked"
5) Save the changes and close Reader X
Screenshot attached :
Then try to view any PDF in browser.
Thanks
Vikram -
I have trial version of Hulu. Tried to set no renewal option and will not come up on screen after clicking renewal options or box with subscription price.
I have been getting the black screen after waking. My screen is not set to sleep, so I don't know if it's related. Some discussion of the problem here:
http://discussions.apple.com/thread.jspa?threadID=1227085
http://discussions.apple.com/thread.jspa?threadID=1243743 -
my iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% battery what would i do im very tensed please help ...
Hello s0ha1b
If all you get is the Apple logo and it powering off, then the next step is to put your iPhone into recovery mode and then use iTunes to restore it. If you have a back up, then you can put that on there to once the restore is complete.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
Can you have a DIAdem file embedded in a web app and then when you click the link to the DIAdem file it invokes DIAdem?
Hello JCN,
I will keep in touch with the current Applications Engineer who will be assisting you with this issue and update the forum with the status of the problem. I personally think that your best option would be to create a link that opens DIAdem and then runs a script to load the data from a predetermined file (Rather than a link to the file itself).
Ian M.
National Instruments -
After updating my I phone to io7 my phones battery power instantly halfed I have switched off all back ups etc etc and reset my entire phone but no difference any iseas
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then was new). Try each of these in order until the issue is resolved.
-
i have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??
You can turn iMessage off on your iPhone. That's relatively easy. Since iMessage is an Apple product/service, I have no idea how a Samsung phone will deal with an incoming one. For that answer you should probably contact Samsung support.
-
The directions you provided above doesnt even work! when I selected "Click to open your account", there is an ERROR message and takes me to no where! when I try to access my itunes account, it says I have no history?
You are not able to view purchase history on your iOS device. You may only re-download previous purchases from the iOS device.
To review your iTunes Store account's purchase history, follow the steps in this article from a computer only:
Seeing your iTunes Store purchase history and order numbers
http://support.apple.com/kb/HT2727 -
The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes.
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks
If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).
Maybe you are looking for
-
After the Airport update today, Airport Utility 6.0 no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green? I'm running Lion on my iMac and updated when Air
-
Ipod wont show up in itunes after i restore to factory settings
My ipod does not show up in my itunes list but it shows up in my computer as a drive it all started when i got my ipod back after getting it fixed ( it was a problem with the battery) well it said that i needed to restore the factory settings so i di
-
My macbook pro is not booting, please help me :(
hello, my macbook pro is not booting in OS X, it displays the apple logo and the spinning wheel, but a circle with a cross appears and the spinning wheel continues, please guys, help me P.S: my MBP is boot camped
-
How to send input parameters to a file adapter module
Hi all, i have a requirement like , i need to pick a file from a file server based on a condition. that condition we write in adapter module (in file sender channel). the condition needs some input , so how can we send input parameters to adapter mod
-
Encapsulation command in subif
Greets, I have a 2610 router and I am attempting to enable DOT1Q on eth0/0.1 for router-on-a-stick configuration. My sh ver is as follows: Router>sh ver Cisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 12.2(8)