HT3805 My Aperture 3 just crashed, i.e., it would not open and showed an error message -1712.  I sent the current version to trash and reinstalled from my A3 disk, but after installing again it still says "Aperture can not open -1712."

My Aperture 3 just crashed...by that I mean it would not open and showed the message: "Aperture 3 cannot open.  -1712."  I have the latest A3 version and had been using it continually for 3 years.  This was the first crash.  And it will not open as often as I tried.
I am using a 13" Macbook Pro with OSX 10.8.5.
I tried sending the A3 application to trash, and reinstalling from my A3 disk.  Install message said "installation successful."  But A3 would still not open and gave same message with -1712.
Any suggestions what I should do or try?
Thanks

Perhaps your Aperture library was damaged, when Aperture crashed. What where you doing, right before the crash happened?
- If you installed new software - programs, plug-ins, preferences panels, check, if they are compatible.
- If you imported new images, you may have imported corrupted files, that crash Aperture.
Can Aperture launch correctly, when you try to open a new Aperture library?
Hold down the options-key, when you launch Aperture and select to create a new library. Import a few images. Does that work?
If Aperture will launch on a new Library, try to repair your current library. Hold down the key-combination option-command ⌥⌘  firmly while double-clicking the Aperture library to open in First Aid Mode. Hold the keys down, until the panel appears, and then try  the First Aid Options in turn.
I have the latest A3 version
Is it Aperture 3.4.5? The latest Aperture 3.5.1 will not work with Mt. Lion.

Similar Messages

  • TextEdit.app is corrupt. I have tried repairing and I have tried reinstalling but it still says You can't open the application TextEdit.app because it may be damaged or incomplete.

    TextEdit is  not working. I have tried repairing and I have tried reinstalling but it still says "You can't open the application TextEdit.app because it may be damaged or incomplete."
    Can anyone give me some other ideas as to how to fix.  Thanks.

    Thats the first thing I tried last night. And reinstalled just textEdit but no luck, then I deleted TextEdit and reinstalled it again and I was still getting the same message.  Tried pacifist this morning again but this time I tried reinstalling the whole apps package half way through its says it cant reinstall due to multiple missing files.
    Tried the repair option on the OS  disc it says everything is fine

  • HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

    HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

    I have the same problem, and the solutions in   Error changing modules | Lightroom do not work.  Even uninstalling and reinstalling a new copy did not solve the problem.  As anyone got an idea what other lingering files might be causing the problem?

  • I can not install the newest version of OS. Download seems to be ok, but after that, I got err = -3259

    I can not install the newest version of OS. Download seems to be ok, but after that, I got the status "0 KB von 777,8 MB - gestoppt (err = -3259)". Who knows that issue and can help me?

    See this previously completed discussion:
    err= -3259

  • When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening

    When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening

    Tried the un-install and getting the same problem although it takes a bit longer before it crashes this time. Checked the problem report and it looks the same as the previous reports.
    Problem signature
    Problem Event Name:          APPCRASH
    Application Name:          iTunes.exe
    Application Version:          10.2.1.1
    Application Timestamp:          4d756476
    Fault Module Name:          MediaToolbox.dll
    Fault Module Version:          1.0.694.3
    Fault Module Timestamp:          4d4d9a00
    Exception Code:          c0000005
    Exception Offset:          0034a672
    OS Version:          6.0.6002.2.2.0.768.3
    Locale ID:          2057
    Additional Information 1:          fd00
    Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
    Additional Information 3:          fd00
    Additional Information 4:          ea6f5fe8924aaa756324d57f87834160

  • I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

    I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

    Hello lenmin,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Have a great weekend,
    Alex H.

  • Iphoto will not import my photos from my digital camera because it says it is having a problem downloading my photos. I'm using the same digital camera I have always had and have the current version of iphoto and am usuin snowleapord. Any thoughts?

    iphoto will not import my photos from my digital camera because it says it is having a problem downloading my photos. I'm using the same digital camera I have always had and have the current version of iphoto and am using snowleapord 10.6.8. Any thoughts?

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • After installing Yosemite on my Mac, I can't open Photpshop CS5.1 anymore. it asks me to install the old Java SE 6- what shall I do ?

    after installing Yosemite on my Mac, I can't open Photpshop CS5.1 anymore. it asks me to install the old Java SE 6- what shall I do ?

    uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later".

    When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.

    I'm getting the same problem with both my IPad 4 and iPhone 5
    Just started a few weeks back, Since then I have had two Itunes updates.
    Is this something Apple is aware of and trying to fix?

  • Error message "Reload original in the automatic document feeder (ADF) and try again."

    My all-in-one HP Officejet 8600 plus continues to get the subject error message whether I use the document feeder or scan on the glass. It started right after a document pulled in sideways in the document feeder and got caught. I was able to pull it out complete. It did not tear or shred, just crinkled up. I can still get a copy made from the document scanner, but not one from the scanner bed. When scanning from the document feeder to the PC, this message prevents me from getting the document on the PC. I do a lot of scanning and need this feature to work. When scanning from the glass bed, this message prevents me from getting the copy. 
    I have cleaned all the rollers, scanner bed, and anything that I could see. I have checked all places on the top, inside the document feeder, in between the rollers, under the document feeder, also in the rollers, inside the cartridge compartment, and in the back collating department for any clogs and/or pieces of paper or debris. There is none. I have made sure the printer was reset to factory defaults. I also unplugged the printer cord from the printer and wall socket and let stand for at least 60 seconds to be sure there was a proper reset this way. And one other thing I checked was to be sure that I could not reset the printer in any way from my PC which I could not. As you can see, I checked everything that I could but to no avail.
    My warranty ran out 1 1/2 months ago and I cannot afford to buy another printer since everything else seems to be working great. Can anyone give me something else to look at that will fix this problem? Oh, before I forget, I can still print from the PC just find, I just cannot get document to show up on PC because this error prevents me. Thank you very much for any suggestions.

    I have the same problem.  Did you get a resolution?

  • My iphone 4s is not being connected to laptop and showing an error message as it is unrecognised device

    my iphone4s is not being recognised by the laptop...it is showing an error message as unrecognised device...wat would be the problem?? plzzz help!!!

    Some clarifying questions, in hopes that the answers will help somebody help you:
    What kind of connection (USB, WiFi, Bluetooth)?
    What kind of laptop (MacBook, Windows PC; running what operating system level)?
    What kind of connection are you expecting, for what purpose?
    Was it working before, or is this the first time you have tried this combination?

  • When I try to open firefox it says an update is ready to apply, but when I click ok it says it can not because firefox is already running.

    When I double click Firefox it says an update is ready to be applied. Would you like to apply it now? I click yes and a green bar starts to fill, at about 3/4 it beeps twice it says it could not be completed because another instance of Firefox is already running, please close it and retry. However, the only program my task-manager shows is the update.

    Did you check the Processes tab in the Task Manager?<br />
    You may also have other (security) software that is having a file handle open on some of the files.<br />
    In that case you may need to download the full version and delete the Firefox program folder before installing that downloaded update.
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.0 r32
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • HT1349 I can not install iTunes on my PC, I get an error message: "Unable to remove the previous version of Apple Software Update". How should I resolve this problem.

    I can not install iTunes on my PC, I get an error message: "unable to remove previous version Apple Software Update"

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • After installing java se 6 runtime, matlab can't open

    After I have installed Yosemite, It is said I have to install java se 6 runtime to open Matlab. After installing it, error happens.
    Anyone knows what happened?

    I'm having the same issue. I keep getting:
    "Too many redirects occurred trying to open “https://support.apple.com/kb/dl1572?locale=en_US”. This might occur if you open a page that is redirected to open another page which then is redirected to open the original page."
    Is there another link somewhere?

  • I bought MACkeeper and used it to cleanup my computer. I have a Imac intel, When I didi this it deleted all my files. I tried to do a time machince. and it didn't work. so I pulled the files out of trash and my computer still isn't runing right.

    I bought MacKeeper to help make my Imac intel faster. Insted it deleted all my files.
    I tried to recover using time Machine, and it didn't recover back to yesterday. So I started to pull
    the files and Applications out of trash. This just got me lipping along. It ran slower and would get
    the spining wheel of death. I finaly gave in and thought I would reinstall Lion and everything would be
    great. Well wrong, I seem to be starting fine, but all my files are gone. When I go in to time Machine
    I see a device drive name (xxx). I go in that device and all my files are there. how do I pull them to the new
    install of Lion? So I can be happy again. Thank you for all your time and help.

    Do not install MacKeeper:
    https://discussions.apple.com/docs/DOC-3026
    (Please note that references to the original developers, Zeobit, should now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.

Maybe you are looking for

  • My Built-In Webcam wont work

    My webcam is built-in and it said i need to install webcam in my laptop. when I looked at Device Manager there was no Display area for my Webcam. But i did find  Cyberlink webcam is Sound, vedio and game controllers area. My webcam won't work and i a

  • PDF created from Office 2013 with Acrobat X doesn't have correct page size

    We have a process of quickly creating PDFs along with combining several Word files to PDF by utilizing the "right click" on a Word file(s) to save as a PDF within Windows.  Many times, our page size in Word is 5.5 X 8.5 and it does not save actual pa

  • Charged me but I did not recieve the item.

    I purchased poker chips on the app "Texas Poker" but didn't recieve the poker chips and they still charged my card for $100. Usually when I buy the poker chips and the transaction is pending i will recieve the chips right away, but it's been about a

  • [svn:fx-trunk] 7803: Metadata needed by Bangalore team for event-handler generation.

    Revision: 7803 Author:   [email protected] Date:     2009-06-12 15:33:24 -0700 (Fri, 12 Jun 2009) Log Message: Metadata needed by Bangalore team for event-handler generation. Bug: http://bugs.adobe.com/jira/browse/SDK-21632 Checkintests: Pass Reviewe

  • UC500 Multisite manager error in CCA

    I am getting message when I click on Multisite Manager within CCA "Multisite Manager was not able to retrieve the current configuration Please make sure that device descovery has completed and then press Cancel below and restart Multisite Manager If