HT3867 My iPhone won't display the login page for public wireless hotspots

My iPhone 4S does not load the login pages of public wifi hotspots. It has not always done this for I cn remember a using it afew times. Help please before I break this phone lol

One possibility is that you have specified DNS servers in your Network preferences. (Network Preferences -> Advanced -> DNS, see if anything is specified.) If so, you want to create a new network location which doesn't have any DNS servers defined. (Network Preferences -> Location -> Edit Locations.) Create a new one (click the + sign), and use that location when logging on to public WiFi hotspots.
The other (and worse) problem might be a security feature added to OS 10.7.2 and higher versions.
Apple found out that a hacker could fool you into accepting a bogus "update" via a fake Software Update pop-up. The fix was to rig the OS so that, when you connect to a wifi network, a Mac running the new and improved OS will silently "phone home" to an IP address at apple.com, and inquire about the hotspot's certificate. If it fails to get back a message declaring the hotspot's certificate to be valid, it assumes that the hotspot login popup is fake, and won't let you proceed. The permanent solution is for the hotspot's "captive portal system" to allow Macs to connect to the Apple host, so that the OS can do the verification. Most public WiFi systems have made the adjustment, but there are quite a few (including many schools) who are behind the curve. If this is your issue, tell whoever runs the network to get with the program!
While waiting for that to happen, you can always copy the login page url from a PC (or older Mac OS) that is able to access the hotspot, paste it into your address bar, and take it from there. (Truncate the url at the first question mark . . . the ? and all the junk that comes after it are likely to be specific to the machine you copied it from. You'll see a fresh bunch of junk materialize, as the site talks to your Mac.)

Similar Messages

My itunes won't show the complete page for the license agreement page

i just got a new ipod nano and like my itunes won't show the complete page for the license agreement page. I can see like two thirds of the page but can't see the rest so i can't agree to the license agreement. Advice please

You need to set your screen resolution to 1024x768 on this screen
Start > Control Panel > Display > Settings tab

I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"?

I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"? I have back up in the past but the last month I have not. I really want to keep the data.
So how can I go in and change the setting, It stays ofcourse at the apple screen with wheel. All info is there and the computer works fine, just cannot use it or have been able to log in.

wjosten is spot on. If you really want iCloud, then you will need to acquire a new or second hand MBP that can run Lion.
Ciao.

Firefox does not automatically load nor find the login page for a public network (i.e. username and password)

To log in on a public network without a password-key (not secured), a user login is required.
After connecting to the network, the browser, upon opening it, normally automatically loads the login page, in order to enter a username and password and connect to the internet.
Firefox doesn't find the login page automatically, so I need to switch to google Chrome just to log in to the network.
Does this have anything to do with user settings in the options of firefox?
Any ideas?
thx!

Hi,
You can try setting the login page as the [https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page Home page] and choose to '''Show my home page''' beside '''When Firefox starts:'''.
Alternatively, and/or to preserve your current settings you could also pin it as an always present one-click away [https://support.mozilla.org/en-US/kb/what-are-app-tabs App tab].

How can I change the login page for an application

Hello,
I've created an application that uses some general login page (http://localhost:7777/pls/apex/wwv_flow_custom_auth_std.login_page).
How can I make my application to use, by default, a custom Login page (in fact the 101 - Login page) ?
Thank you.

Create an authentication scheme using the wizard in the Application Builder. It will normally default to using page 101. If you need to edit the scheme, you can change 101 to something else.
BTW, the procedure you named is not a login page and you should not use that procedure.
Scott

After updating ios8, my iphone5s won't display the full page of options when I depress the green "phone" button. Only 1/4 of the page displays. I cannot place calls or read contacts.

a

Try replacing or use another battery to see if it boots. Liquid damage can be quite funny, depending on the water/liquid it might take weeks or months before the device fails. The battery is almost always the first to go if it gets wet.
If you are the original poster (OP) and your issue is solved, please remember to click the "Accept as Solution" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the Star on the left of their post.

Visit the Wiki Page for Public Sector

[http://wiki.sdn.sap.com/wiki/display/PS/Public+Sector]

Atif,
In the US public sector organizations are expected to create Revenue and Expenditures statements and Balance Sheets by Fund. This is known as Fund Accounting. SAP supports this in the New GL with the tables FMGLFLEXT or PSGLFLEXT.
Thanks
Shyam

How do I set the default welcome page for PUBLIC user

gurus,
i'm using -
Oracle 9i Database
Oracle 9ias Portal Release 2
QUESTION => how do I set the default welcome page for the PUBLIC user.
i did the following to achieve this -
1. logged into portal
2. clicked on builder
3. clicked on administer tab
4. selected PUBLIC user in the Portal User Profile portlet
5. went to the preferences tab
6. in the default home page selected a custom page group
7. logged out of portal
8. open a new browsere session
9. type the portal URL and i get the login page ....??
i'm unable to understand this behavior ... shouldn't i be getting the page group that i set for the PUBLIC user in step 6 above ....
the second QUESTION is => when the user logs out he/she should see the PUBLIC page set in step 6 above ... but, instead the user sees a page that is as follows -
Partner Application Name Logout Status [Logout Status]
Oracle Portal (portal) logout status
The SSO Server (orasso) checkmark
buzz.resva.trw.com:7778 checkmark
infrastructure.happy.resva.trw.com checkmark
portal1.buzz.resva.trw.com checkmark
portal2.sylvester.resva.trw.com checkmark
sylvester.resva.trw.com:7778 checkmark
so, how can i set the default page for the PUBLIC user and also a page when he user logs out.
ideas anyone ....?
thanx a bunch.
hero

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
The issue your having is with the way Keynote takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
Keynote preferences > Presenter display.
If you want to show a wesite or another app on either display, use application switcher:
press the the command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command > tab to return to Keynote.

Iphone won't display entire email message, only preview?

Sprint iphone 4Gs will display only preview of email message. When I tap on the preview, it won't display the entire email message, only the preview. Previously worked fine, only recently started doing this.

I recently had a problem with messages too. Try hooking up to itunes and hitting the restore button. You will have to back up your settings again, but it worked to solve my problem. Hope that helps.

Over half my albums in iPhoto won't display the enlarged photo. How can I correct this?

Over half my albums in iPhoto won't display the enlarged photo. How can I correct this?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

My iTunes won't display the artwork

My iTunes on a jukebox setting won't display the artwork. It currently has an error message of "iTunes is unable to browse album covers on this computer".
It was working fine the other day. I have updated it version when I received the error message but still nothing.
However when i select the middle view option, it shows the artwork.
Please help. The black screen is annoying!

....it's my cover flow view that is not working!!!!!!

HT5858 Both my iPhone & iPad now on version 7 do not display the airplay connection for my Apple TV ?

Both my iPhone & iPad now on version 7 do not display the airplay connection for my Apple TV ?

Hey Barry02,
Thanks for the question. I understand you are experiencing issues with AirPlay. The following resource may help to resolve your issue:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Because the issue is occurring on both devices, it may be isolated to the Apple TV itself. You may want to troubleshoot the Apple TV connection:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Thanks,
Matt M.

Display the login User ID on Header in Business Objects XI R3.1 Infoview

In XI R2 Infoview- the login user ID is displayed on header. However In XI R3.1 infoview- displayed Business Objects Logo on the same place of the Header. We noticed that In BO XI3.1 infoview the login user ID is displayed on header. However the Business Objects logo is displayed on top of the user ID so the user ID is hidden. while Setting the Infoview Application properties in CMC (CMC>Applications>Infoview Application Properties> check Do not display logo) then it will hide the logo and then next login displays the login user ID. Could someone please confirm is it the solution with this configuration or else please help us how to display the user ID on Infoview Header.

Hey,
What you did is exactly correct.
Now you did on XI-R2 and 3.1 right??, whenever you got upgrade to next release of BO version again you have to do the same changing of properties. Which should not be dynamic based on your previous changes on earlier versions.
Thank You!!

HT1600 update Apple TV via settings general update software advise Apple support. But Airplay won't display the Apple Tv because it needs an updated compatible software. Catch 22. How does one resolve this contradiction please? Paul

update Apple TV via settings>general>update software advise Apple support. But Airplay won't display the Apple Tv because it needs an updated compatible software. Catch 22. How does one resolve this contradiction please? Paul

only the following macs support airplay mirror
http://support.apple.com/kb/ht5404

HT3867 My iPhone won't display the login page for public wireless hotspots

Similar Messages

Maybe you are looking for