HT3887 how can i configure my wireless keyword so i can use the Function F keys to control volume etc...? I am using 10.5.8 OS
how can i configure my wireless keyword so i can use the Function <F> keys to control volume etc...? I am using 10.5.8 OS
little wireless cameras would not have the ability to send back to the base, even thought the base can reach it.
Now if you take regular cameras and wire them into a Cisco switch that was attached to a wireless bridge that could shine back to the base...now you might have something, but your still going to have to do a survey/path analysis to determine if it is feasible.
Coverage isnt throughput. I see one base station with 3 or 4 sectoral antennas depending on direction, pointing two several distribution bridges to bridge the gaps that go out again to the cameras...something like that. And all of it should be higher in the air than your construction.
Similar Messages
-
How do I configure my IMac so that I can see/speak with someone using an IPad 2 ? Thank you
The Apple solution is to register for and use separate Apple ID's on both devices and Apple software:
Purchase FaceTime from the Apple Mac App store. (US$0.99 for Version 1.1 last time I checked).
The US iPad 2 already includes the FaceTime App.
I've read that Skype also works with a Skype app for the iPad, but I have not tried it. -
Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help
Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.
-
How can I use the MS Windows Key in Linux
Hello!
I'm using KDE 4.3 and want to use the MS Windows Key to open the KDE start menu.
I tried to add the Windows Key by pressing as a "KDE Application Launcher" hotkey, but the window key wasn't accepted as a hotkey.
Is it possible to add this key as a hotkey?
Thanks for help!
Best regards,
FlasherI have the following line in my .xinitrc:
/usr/bin/xmodmap -e "keycode 133 = F30" &
...where keycode 133 is my win key. I assign it to F30 (it can be any number besides 1-12, I guess), and then it's just a matter of configuring escape key (in your case, it'll be kde start menu) to F30. -
How can and where i use the function "HTMLDB_UTIL.CLEAR_PAGE_CACHE "
how can and where i use the function "HTMLDB_UTIL.CLEAR_PAGE_CACHE " ?
where is the place to put this function?i have notice that sometime, during visual a report of a table, order by data insert desc, some record are not displayed on some client.
Only whe we clear the cache of internet explorer than this record can view.
I have an idea that a clear page when i call the report may be solve the problem.
Thank's.
------------------------ -
Can I add or edit Keywords and captions from within the Map module?
I frequently find a need to edit or add to the caption while reviewing and geotagging photos in the Map module. Constantly toggling between modules is inconvenient. Is there a way to add/edit captions or keywords while working in the Map module (or view the map module while working in the Library?
Thanks!
Stevethank you
From: Modesto Vega <[email protected]>
To: Steve Murray <[email protected]>
Sent: Thursday, January 29, 2015 3:27 PM
Subject: Can I add or edit Keywords and captions from within the Map module?
Can I add or edit Keywords and captions from within the Map module?
created by Modesto Vega in Photoshop Lightroom - View the full discussionYou should be able to change the title, the caption, the sublocation, the city, the state/province, the country, the ISO country code, the altitude, the direction, and a few other fields. However, you cannot add keywords. It would be real nice if Adobe could add this to the Map module. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7145077#7145077 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7145077#7145077 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
When I use the function of "finding keyword"(ctrl+f), the keyword would be shown in green. I want to change the highlighted colour to be blue. Is there any function to change the colour?
See '''''cor-el's''''' answer in this thread: https://support.mozilla.com/en-US/questions/900541
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
How to use the function module ....
hi
how to use the function module ssf_function_module_name in smartformsHi..
If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
Check this link.I am expalining here how to use this function module.
https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points if useful</b>
Regards
Ashu -
Why can't I use the function of menu item 'issue delivery output'?
why can't I use the function of menu item 'issue delivery output' in main screen of delivery note?
And at the same time I can't use the button of printing in main screen of delivery note.
the main screen of delivery note I mean above is in screen of maintaining shipping data instand of the first screen of VL02N.
TKS in advance.Hi,
Because delivery will be having header level output and item level output. So if u try to print through main screen then system will not know whether it is header related or item related. That is the reason it is only print output at header level or item level but not in main screen.
I think u may have doubt like how billin will be issued output through Main screen. Because for billing both header and item level data are same..
Regards
Sankar -
How to use the function module 'HR_ES_FEATURE_BACKFIELD'
Hi,
How to use the function module 'HR_ES_FEATURE_BACKFIELD'?
I need the usage from both technical as well as functional point of view.
What is the use of this function module and technically how it is to be used to retrieve a feature for a particular employee.hey iam from functional side can u be little bit clear of that feature
thanks
sikindar -
Hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to
hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to click on the fn + function key
Hi,
You can change this in your system bios as described in the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
How to use the Function Module RH_READ_INFTY_1001...
Hi,
Can any one Tell me .. How to do the same functionality .. given below (select).
Using the Function Module RH_READ_INFTY_1001...
*reads CP (Central Person) based on BP (Business Partner)
Select single objid (Object ID)
from hrp1001
into gv_sobid
where subty eq 'B207'
and sclas eq 'BP'
and sobid eq is_header-partner.
*reads P (Person) Based on determined BP (Business Partner)
select single sobid (ID related Object)
from hrp1001
into gv_sobid
where subty eq 'B209'
and otype eq 'CP'
and objid eq gv_sobid.
*determines UserID from IT0105 for determined personell ID
select single usrid
from pa0105
into gv_usrid
where pernr eq gv_sobid
and subty eq '999'.
Reply ASAP....
Answers will be Rewarded...objects-plvar = l_plvar.
objects-otype = 'S '.
objects-sobid = l_positions-objid.
APPEND objects.
CLEAR i1001_itab. REFRESH i1001_itab.
CALL FUNCTION 'RH_READ_INFTY_1001'
EXPORTING
* AUTHORITY = 'DISP'
* WITH_STRU_AUTH = 'X'
istat = '1'
* EXTEND = 'X'
subty = 'A008'
begda = l_keyda
endda = l_keyda
* CONDITION = '00000'
* SORT = 'X'
* WITH_EV = ' '
* ADATA = 'X'
TABLES
i1001 = i1001_itab
objects = objects
EXCEPTIONS
nothing_found = 1
wrong_condition = 2
OTHERS = 3.
IF sy-subrc <> 0.
CLEAR i1001_itab. REFRESH i1001_itab.
CLEAR mngr_nr.
ELSE.
READ TABLE i1001_itab WITH KEY sclas = 'P'.
IF sy-subrc = 0.
mngr_nr = i1001_itab-sobid.
ELSE.
THis is the sample code to use function module using this function module you can get upto HRP1001 selection for userid you need to use same select you write for PA0105 -
How to use the function module CONVERSION_FACTOR_GET?
Hi Experts,
I have to use convert the value of a field from units 'HL' to 'HHL'. According to me, we can use the function module CONVERSION_FACTOR_GET. However, i am not able to know how to use it?
Can anyone explain how to use the FM, i mean what should be the importing and exporting parameter.... For recap, i need to convert HL to HHL, for example 3 HL to 0.03 HHL.
Please help.
Rewards for sure!
Thanks in advance.
AkshHi
If it is Unit Conversion better use the following Fun modules
UNIT_CONVERSION_SIMPLE
MD_CONVERT_MATERIAL_UNIT
goto SE37 first and execute them by entering some value and then use it in the code after confirming it
Regards
Anji -
Regarding how to use the function module *control_form* in scripts
HI friends,
Can any one tell why and where do we use the function module control_form in scripts. Can you give me a small scenario how to use in scripts.hi satish,
by using this function module we can pass the control
commands to FORM THROUGH ABAP/4 PROGRAM.
see the following example:
TABLES: kna1.
DATA: BEGIN OF it_kna1 OCCURS 0,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1,
ort01 LIKE kna1-ort01,
land1 LIKE kna1-land1,
END OF it_kna1.
DATA:records TYPE i,
window TYPE i value 1.
select-options:s_kunnr for kna1-kunnr.
SELECT kunnr name1 ort01 land1 FROM kna1 INTO TABLE it_kna1
where kunnr in s_kunnr.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'ZSCRIPT4'
language = sy-langu.
LOOP AT it_kna1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ELE1'
function = 'SET'
type = 'BODY'
window = 'MAIN'.
DESCRIBE TABLE it_kna1 LINES records.
IF window lt records.
window = window + 1.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'NEW-WINDOW'
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
thanks,
raji -
How to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'
Dear Experts,
Can anyone Explain me how to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'.My Requirement is i want to change the Partners of the Service Order.It is Very Urgent Requirement Please Help me.
Thanks & Regards,
Ashok.Hi,
For service order you can use FM 'BAPI_ACTIVITYCRM_CHANGEMULTI' as it is much easier to use.
Sample code is below. You can use that:
"fill the details of partner which is
"to be added as main partner or in place of Interaction Agent
wa_partner_new-ref_guid = w_guid_ref.
wa_partner_new-ref_handle = '0000000000'.
wa_partner_new-ref_kind = 'A'.
wa_partner_new-kind_of_entry = wa_partner-kind_of_entry.
wa_partner_new-ref_partner_handle = '0000'.
wa_partner_new-ref_partner_fct = 'Z_IA'.
"wa_partner-partner_no : New partner no.
wa_partner_new-ref_partner_no = wa_partner-partner_no.
wa_partner_new-ref_no_type = wa_partner-ref_no_type.
wa_partner_new-ref_display_type = wa_partner-ref_display_type.
wa_partner_new-display_type = 'BP'.
wa_partner_new-no_type = 'BP'.
wa_partner_new-partner_fct = 'Z_IA'.
"w_partner_no : Old partner no. which is to be changed
wa_partner_new-partner_no = w_partner_no.
wa_partner_new-mainpartner = 'X'.
INSERT wa_partner_new INTO TABLE it_partner_new.
wa_partner_newx-display_type = 'X'.
wa_partner_newx-no_type = 'X'.
wa_partner_newx-partner_fct = 'X'.
wa_partner_newx-partner_no = 'X'.
wa_partner_newx-mainpartner = 'X'.
INSERT wa_partner_newx INTO TABLE it_partner_newx.
IF it_partner_new[] IS NOT INITIAL AND it_partner_newx[] IS NOT INITIAL.
"maintain all changes to be done
CALL FUNCTION 'BAPI_ACTIVITYCRM_CHANGEMULTI'
TABLES
partner = it_partner_new
partnerx = it_partner_newx.
CLEAR : wa_guid1.
REFRESH : it_guid1.
wa_guid1-guid = w_guid_ref.
APPEND wa_guid1 TO it_guid1.
"save the changes
CALL FUNCTION 'BAPI_ACTIVITYCRM_SAVE'
TABLES
objects_to_save = it_guid1.
"commit the transaction
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
Reply fro any further help.
Please reward points if helpful.
Regards,
Ashlesha
Maybe you are looking for
-
Now my iphone had the screen with : Your Iphone could not be activated because the activation server is temporarily unavailable. Try connecting your Iphone to the itunes to activate it, or try again in a couple of minute. What i should do with my pho
-
Calling web service in offline form.
Hi, I m trying to call web service in offline form with java script. How can i pass request parameter? How can i get response? Is there a sample java script code to do it? Regards.
-
I am NOT able to sign into iCloud on my computer?
icloud came with Windows 8 on my new computer. I have an iTunes account but I currently do not have any Apple products such as an iPad, iPod,Etc my phone is a samsung galaxy s4. I am NOT able to sign into iCloud on my computer? Well I'm not be able t
-
Access 2010 VBA - multiple overlayed graphics
I'd like to create a stacked bar chart from one table and then overlay two line charts from different tables over top of the bar -- essentially showing three variables in different ways. Is there a way to overlay graphic types in Access 2010? If no
-
I redeploy EAR application from within JDeveloper (9.0.3.2) to OAS9i. Everything is OK, except that some classes are not redeployed and are kept from the earlier version. Specifically, old versions of MsgBundles from the BC4J project are not redeploy