HT3964 My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!

My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!

Give this a try:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Similar Messages

MacBookPro 2.3GHz Intel Core i7 will not start-at all

My MacBook will periodically just not start. It is more likely to do this if it has been off for while (as in a week) or after the battery has run low. I have to keep pressing the start button. I will sometimes press and hold and nothing will happen, or I might try a "quick" press down. Eventually the unit will power up.
Yes the powercord is attached and has the "green" connected/charge light on.
This is very disconcerting because sometimes it wont come on at all for a long while (as in over an hour of trying). Once it starts up it loads up all programs fine.
I would really apprecaite any recommendations before escalating to product support. (It is currently on and running)

The symptoms that you describe suggest a bad switch. The best option is a trip to the Apple store genius bar for a free definitive diagnosis.
Ciao.

Bought and installed a new battery for my Mac Book Pro 5.1, intel Core 2 dual, the computer makes a lot of noise! The noise disappears in sleep mode. What can be done?

Bought and installed a new battery for my Mac Book Pro 5.1, intel Core 2 dual, the computer makes a lot of engine noise! The noise disappears in sleep mode. What can be done?

I bought it from Other World Computer last week for $95. 3rd party, I suppose.

Hello friends!I use mac book(2.4 GHz intel core 2 duo).is it worth updating to snow leopard and then lion?if so how to do so?

Hello I use mac book 2.4 GHz intel core 2 duo.Is it worth updating to latest version like snow leopard and then Lion or buying new mac air?
regards
Clayton.

Well, it depends on what you expect it to do and if it works as expected - it that answer is yes, I'd say make sure you max out the RAM (I've noticed Snow Leopard needs more). Doing it this way gives you a machine which will run 2 different OS versions - on the other hand, depending on when you'd buy the MBA, you may only be able to run Lion (unless you buy that quickly as well while they still come with SL).

My mac book pro (2.66Ghz Intel core i7 4Gb ram) crashes every time I open iPhoto, browse photos or videos from Finder and work with slides, this started after I upgraded to mountain lion, what can I do??

I updated my OS to mountain lion and since then my mac book pro is virtually useless, seeng pictures, videos, using graphics applications and Iphoto is impossible, the screen goes black, and the system restarts.
This even happens sometimes at login, the login screen appears then the computer crashes and restarts, sometimes more than once, yesterday it even happened 6 times in a row before I was actually able to enter the password and log in.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy (command-C) the selected text to the Clipboard. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copy-and-paste as well. Omit the final line ending in “$”. No typing is involved in this step.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which you do have to type. It won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Cannot access my CDROM: Mac book pro 8,1 - Intel Core i5 – 2.23 GHz (early 2011)

Aloha & Happy New Year,
Was running (triple booted with rEFIT) MAC OSX, win7 (64) and Linux (BT5/64) all was well. At some point Win7 crashed, thus I began the reinstall process.
Problem one, reinstalled OSX with install CD without issue. Then during the Q&A segment of fresh install vs.- use a backup copy option; I chose backup copy and somehow I ended up without the correct login pw. So now I cannot login. Nor can I reset using the Master or Firmware pw. I have tried every imaginable pw.
Problem two, during the iphone /iOS 5 upgrade debacle (The "Encrypt iphone backup "PW issue") I lost amongst other vital info, my notes which contained a copy of my firmware and master pw.
The main issue, I cannot access or utilize my CDROM in order to reinstall or access the disk utility. It simply bypasses any CDROM straight to the login screen.
I have attempted:
Restart HOLD-C, PRAM, NVRAM, Option key, restarting with WIN7, restarting with Linux, two different USB drives. Powered off, removed all cables. Opened up back panel, (grounded myself) removed power from logic board and re-connected all parts after several minutes. The question, why is the CD bypassed each and every time? Mind you, this is not the first time I have faced the bypass of the CDROM, yet each time before I have somehow solved the issue. It is a mystery. As in other threads I have posted I do have an iMAC next to my MB Pro. I unseccusfully attempted to use the iMAC for assistance in accessing the mb pro.
I AM AT A LOSS.

Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

Why does my Photoshop PS2 open on my Mac Book Pro OS 10.6.8 Intel Core 2 Processor but not on my just purchased Mac Book Pro OS 10.7.3? On my new machine I get a message saying "You can't open Photoshop CS2 because Power PC applications are no longer sup

? Why does my Photoshop PS2 open on my Mac Book Pro OS 10.6.8 Intel Core 2 Processor but not on my just purchased Mac Book Pro OS 10.7.3? On my new machine I get a message saying "You can't open Photoshop CS2 because Power PC applications are no longer supported". I don't have a Power PC on either machine and this App does run on the older machine with an Intel processor. benrusy

This is not new. The fact that Mac OS no longer supports PowerPC applications starting with OS X Lion has been known for over a year now. You'll need to upgrade to the latest version of Photoshop

Mac book pro verses iMac(intel)for streaming video

Mac book pro verses iMac (intel) for streaming video (skpying) which one would you recommend?

Neither one is particularly advantageous. Streaming video will take a considerable amount of power, meaning you'll probably want to keep a MBP's power adapter connected.

Mac book pro 13" 2010 beeps every 5 seconds at start up, will not boot up.

my mac book pro 13" 2010 beeps every 5 seconds at start up, will not boot up. Any ideas what is wrong? Removed and re installed memory, that did not work.
Thank You ecbrum

If you're handy with tools, pop the bottom pan on the Mac, take out the RAM sticks, thoroughly clean the contacts on both the sticks and the Mac (blow clean with a compressed air duster on the Mac, use isopropyl alcohol on the contacts on the RAM sticks), reseat and reinstall the sticks and retry. If same, try swapping the RAM sticks. If you need pictorial assistance, see here: http://www.ifixit.com/Guide/Installing+MacBook+Pro+13-Inch+Unibody+Mid+2010+RAM/ 4319/1

I cannot retrieve my emails on my Mac Book Pro operating on 10.7.3 Icloud was already workingit keeps asking for password and when i put correct password in it keeps asking for it again and again. This has just started today

I cannot retrieve my emails on my Mac Book Pro operating on 10.7.3 Icloud was already workingit keeps asking for password and when i put correct password in it keeps asking for it again and again. This has just started today

Though it's unlikely to be wrong if things were set up properly in the first place, as a check go to Mail Preferences>Accounts and check that the server setting for IMAP (incoming) is imap.mail.me.com (not just mail.me.com).
Your next step either way would be to go to System Preferences>iCloud and sign out, then sign back in again. (You can ignore warnings about data disappearing - your calendars etc. will disappear when you sign out but reappear when you sign back in).

Can mac book,2.2 Gh Intel Core 2 Duo, be upgraded to loin or yosemite

Can mac book,2.2 Gh Intel Core 2 Duo, 2 GB 667 MH ,
be upgraded to loin or yosemite

It can only be upgraded to Lion; you should install more RAM first. Click here and order a download code for it.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(124682)

I have a Mac Book Pro, What kind of software should i buy to able me to watch movie on the net. Right now it just said " Blocked plug in"

I have a Mac Book Pro, What kind of software should i buy to able me to watch movie on the net. Right now it just said " Blocked plug in"

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The type of plugin that you need depends on the type of video file that you wish to view. We would need more details to assist.

I am using mac book pro mid 2012( i7 core, 750gb)

I am using mac book pro mid 2012( i7 core, 750gb)
I am planing to upgrade hard drive to more than 1TB
But I am not sure which one will be correct with medium performance for entry level animation

There aren't too many options for 1 TB or larger notebook drives. Visit OWC to see an example of products.

Respected sir, i have problem with my mac book pro 13, i shows question mark when i start up the laptop. so please reply with the convinient solution

respected sir, i have problem with my mac book pro 13, i shows question mark when i start up the laptop. so please reply with the convinient solution

ajit5544 wrote:
.. my mac book pro 13, i shows question mark when i start up the laptop. ...
See here > http://support.apple.com/kb/TS2570

My Macbook pro is very slow in oening folders, it does not open immediatly as you would expect and takes about 30s or more. Please help! Here is the spec: OS X 10.8.3 2,3 Gz Intel Core i7 8GB 1600 MHz DDR3

My Macbook pro is very slow in oening folders, it does not open immediatly as you would expect and takes about 30s or more. Please help!
Here is the spec:
OS X 10.8.3
2,3 Gz Intel Core i7
8GB 1600 MHz DDR3

Did u try to rebuild spotlight index? repair permissions? verify disk and repair if needed?
if now, try it out.

HT3964 My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!

Similar Messages

Maybe you are looking for