HT3964 My Macbook air charges intermittently. At times when I connect the power adapter it shows that power is coming in but  says "not charging" and the led light on the power adapter does not light. At other times it charges normally. Any ideas?

Hey guys,
I am having problems with charging my mac Air.  Sometimes it charges perfectly but then at times much as it shows that it's getting the power from the charger, it says "not charging" and the led light on the charger does not light up. Any help?
Rgds,
Kido-Vj

That can happen when you are Taxing the system. No Apple supplied AC adapter supplies enough power to both power the system and charge the battery at the same time when the system is under Heavy Load, when you are Taxing the system heavily. At those times it will draw power from both the AC adapter and the battery at the same time. So if it is drawing power from both it can't charge the battery while it is drawing power from it.

Similar Messages

  • What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle?

    What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle? It's a old imac from 1997.

    I don't have original discs that it came with.
    Then you still can use the second option with the keyboard combo I posted, called "resetting the PRAM."
    Also when you way hold the c key down do you mean turn computer off and turn back on holding the c key?
    Yes, or you can simply restart. As you don't have the CDs, this isn't on the plate any more.
    The internal backup battery is not expensive and, in most iMacs is user-replacable. If yours has a tray-loading optical drive like this one:
    it takes a major teardown to replace the internal battery. If this is the case, you'd be better off to leave the computer plugged in all the time; that eliminates the main reason for having a working battery.
    If it has a slot-loading optical drive like this one:
    things are much easier. The battery is visible through the RAM access door on the bottom of the computer case. The manual:
    http://manuals.info.apple.com/en_US/iMacG3_2000UserManual.PDF
    has sketches of how to access the RAM and therefore the backup battery. Unfortunately, the pdf on the manual goes up sideways on-screen and the RAM instructions are pretty deep into the manual. It's probably easier to scroll (for a while) to the section on adding RAM and print the applicable pages.
    When you work on the battery, some sort of non-conductive pliers or large tweezer or forceps help unless you have tiny fingers. Make sure to note the polarity of the old battery and install the new one in the same orientation.
    The battery itself is readily available. If price is no oblect, you can get it for a small rasom from Radio Shack Store ("Tandy" outside the US) as part number 23-026.
    Online, they are dirt-cheap even after adding shipping. I buy backup batteries form this outfit:
    3.6v Newer Technology Lithium 1/2 AA PRAM Computer Clock Battery

  • TS3694 I try to update my iPhone 5 but in the middle of the way error 1603 didnot allow me I did every thing that I read about it but in every computer and updated one it is the same and now I am in DUF mood and my phone can not start what I must to do

    I try to update my iPhone 5 but in the middle of the way error 1603 didnot allow me I did every thing that I read about it but in every computer and updated one it is the same and now I am in DUF mood and my phone can not start what I must to do

    The program is for replacement since Apple does not repair iDevices...you take your non-working or damaged iPhone to an Apple store genius bar, or send to Apple service, and they provide a refurbished unit as a replacement, for a fee, of course.  You will have to talk with Apple to see if you get all components or just the iPhone replaced.
    With AppleCare+ you can have two out-of-warranty replacements for a cost of $49 each.

  • Itunes progress bar is not moving and music won't play. I also have no audio from my laptop at all. Any ideas? I am running windows 8.

    Have had no previous problems with iTunes but for past two weeks my I tunes progress bar is not moving and music won't play.
    I also have no audio from my laptop at all. Any ideas? I am running windows 8.

    I'm having the same incredibly frustrating problem. I have 50-60 GBs of music and now literally ALL OF A SUDDEN most of my mp3s won't play in iTunes. Of the songs that do play, many of them sound garbled (almost as if you were listening to them underwater). As others have noted, the songs do in fact play properly in other media players (VLC, MPC, WMP, etc).
    I feel like I've tried just about everything but I can't seem to fix the problem. Nor have I been able to find any viable solutions after hours of scouring the internet. Here is a list of the steps I've taken so far, in chronological order:
    1. Closed/re-opened iTunes
    2. Re-booted computer
    3. Uninstalled/re-installed iTunes
    4. Tried deleting songs from iTunes library and then re-adding them, but after dropping files into the library they don't show up at all, iTunes refuses to import them
    5. Downgraded from iTunes 8 to iTunes 7
    None of these things have helped at all and I am amazed that even after completely uninstalling iTunes 8 and then installing version 7 I'm still experiencing the same problem. And, on top of things, I've found that iTunes 7 is not recognizing the ID3 tags for many of the songs it does import.
    My apologies for the length of this post. I just want to be specific and provide as much info as I can so that maybe we can find a solution to this thing.
    So, any help would be greatly appreciated. Thanks!

  • There are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responing, close fire fox, or shut down computer. There are other times that it starts up normaly wit no probs

    # Question
    there are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responding, close fire fox, or shut down computer. There are other times that it starts up normally wit no probs
    ..

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • Hi  I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail.  *entered security key/password does not match the one set for for router.  I know th

    Hi
    On my macbook pro
    I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail.
    *entered security key/password does not match the one set for for router.
    I know that the password is correct and have rechecked this by changing it a few times
    and I still get the same result.
    My network internet service provider is not interested and says to call Epson.
    Anybody have any clues how I can resolve this?
    Regards

    I personally suggest the new Drobo FS. Since it has an iTunes server built in and you can use any size sata hard drive in it it is better and a NAS that has to use the same size drives.

  • My MacBook Air tells me I'm out of memory.  to my knowledge I use only 65 GB for documents, photos, videos, apps, and it tells me that 75 GB is taken by "other"  What is in other, and how can I fix it?

    my MacBook Air tells me I'm out of memory.  to my knowledge I use only 65 GB for documents, photos, videos, apps, and it tells me that 75 GB is taken by "other"  What is in other, and how can I fix it?

    For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
              iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
    The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • My iphone5,ios7.1.2...itunes. Version 11.3.1.2 ...when ever i connect ..on iphone from my windows computer on iphone screen it shows that "THIS ACCESSORY MAY NOT BE SUPPORTED " .....every time when i connect this pop up used to appear on

    my iphone5,ios7.1.2...itunes. Version 11.3.1.2 ...when ever i connect ..my iphone from my windows computer ....on iphone screen it shows a kind of pop up "THIS ACCESSORY MAY NOT BE SUPPORTED " .....every time when i connect this pop up used to appear on...kindly resolve my isshue

    iOS 7 will give errors on non Apple certified peripherals.  So make sure you only use Apple certified products. Did you backup the phone and then RESTORE AS NEW (not reset)? Try doing that by plugging the phone to iTunes on a computer. See if that helps. If it solves the problem, there could have been corrupted software on you phone. If not, it could be a hardware issue (including the battery), in which case you would need to go to a Apple Store or authorized service provider.
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,etc

    New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,switch channel from auto to maybe 6,channel width to 20mhz? Already changed security settings to WPA2.  Currently router is running in mixed b and g mode.

    If you have one computer running on G they will all run on G. All ROUTERS are backward compatible, in otherwords if you have a group of computers and all of them are N compatible and one or two are G They will all work but the N computers will run at N and those that are G will run at G speed not N.
    It can get confusing but really it is simple. The newest is 802.11 AC and ic used with the newest Mac Computers made available in November 2013. So if you have the newest Airport Extreme that is 802.11ac and the newest computers that are AC compliant your speed will be 5 times faster than anything on the market right now.

  • Why do I have such a hard time when I connect to facebook games it doesn't want to start the game it sending me a message about apps...what does that mean?

    why do I have such a hard time when I connect to facebook games... firefox doesn't want to open the game the message is sending that their something with the apps..what does that mean?....what is plugin...what do I do for that?

    The usual explanation is that it is a licensing issue. It's not Apple refusing to support an MS product (they support loads of others, like QuickLook for Office docs). MS won't let Apple have it. (The Linux-based solutions are third-party reverse engineered.)
    That having been said, I've never had a problem plugging an NTFS drive and reading files from it. Why does it take you an hour?
    I've never had a problem with a Mac-formatted USB thumb drive not writing either. It's possible that the hardware/software that Apple uses is more sensitive to cheaper thumb drives, but I'm guessing here.

  • HT202731 Macbook air 2014 model screen flickers when ever it is connected to minidisplay port to vga adapter?

    Macbook air 2014 model screen flickers when ever it is connected to minidisplay port to vga adapter?

    Hello EmPuah,
    The article linked below details a number of troubleshooting steps that can help resolve issues with your display.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/en-us/HT201177
    Cheers,
    Allen

  • Does anyone has the same scrolling problem? My macbook air 13''(2010) running lion, when files in a folder arranged by kind, every scrolling paused for a second..?

    does anyone has the same scrolling problem? My macbook air 13''(2010) running lion, when files in a folder arranged by kind, every scrolling paused for a second..?

    does anyone has the same scrolling problem? My macbook air 13''(2010) running lion, when files in a folder arranged by kind, every scrolling paused for a second..?

  • TS1702 My iPad2 will not download and install iOS6!!!!! I have tried over 4 times, powered off, etc

    My iPad2 will not download and install iOS6!!!!! I have tried over 4 times, powered off, etc HELP!!!!!

    OTA or iTunes? Yesterday I used iTunes to update the wifey's with no issues. What are the symptoms?

  • Every time I've tried to download application always showing that my account not valid for the uk store.You have to switch to the emirate store.How to do it?

    Every time I've tried to download application always showing that my account not valid for the uk store.You have to switch to the emirate store.How to do it?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you will be located.
    8. Tap "Done".

  • My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone

    My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone

    Hello transcend94,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    iTunes: Understanding iTunes Media Organization
    http://support.apple.com/kb/ht3847
    Avoid using different versions of iTunes, or you may be unable to locate content, or may import or transfer content to the wrong location.
    Best of luck,
    Mario

  • How come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line

    how come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line.

    My carrier is Sprint. But I actually have checked with others and theirs work fine.

Maybe you are looking for

  • Imovie 7.0 not working with OS 10.5.7

    i have iMovie 7.0 and apparently it won't run b/c I have OS 10.5.7. Is there any sort of update available, or do I have to buy iLife 9 for $75? Thanks for any help

  • Need new all-in-one printer compatible w/Mountain Lion

    I upgraded my MBP to Mountain Lion a few months ago, and I'm having a printer crisis.  I have a Canon MP500 which does a very nice job printing photos, documents and copying, but the scanning feature won't work with Mountain Lion. I contacted Canon a

  • Saving strings in user prefs file

    Hi all, I'm experimenting with user preferences. The IB interface works okay, and the panel appears when selected from the 'Preferences...' menu item. I do have one slight issue with it, but I'll deal with that as a separate question later. In the me

  • Problem Related To HOT Spot in ABAP Programming?

    Hi All, I developed a program of purchase register now i want that on clicking the PO it will take the user to the conserned PO for that i used HOt Spot but still it is not taking me to the conserned PO. Plz tell me what do i do to fullfill my purpos

  • Jagged Overlays

    I have created button overlays for my menu. They are basically underlines which appear under the button when it is selected. I created them in Motion and they look fine... No jaggies. I export them as psd's and open them in any appropraite program an