HT3986 Boot Camp and Partitioning problems

Okay I've had this problem a few times it keeps coming up with this every time it formats the disk.
"The disk cannot be partitioned because some files cannot be moved"
Then it goes on to say that i need to format my disk and stuff and ive done that already
what does this mean like i back up my computer and everything is right so any help here

The easiest way is to clone your Mac to an external hard drive with Carbon Copy Cloner or SuperDuper. Boot from the cloned exernal drive and use Disk utility to reformat the internal drive. Then clone to the Mac with the external drive as a source. Regardless of how you proceed you better have a backup if you value your data. Time Machine is not bootable so is of limited usefulness.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.bombich.com/

Similar Messages

Boot camp and partitions

Hello all,
I am a bit new with boot camp and I am not sure about the size of patition.
What do you suggest me for OS X and Windows partition size?
Thank for advices

ok, thanks for your advice.
I would like to ask you something else. I just inmstall my first boot camp with Windiws 7 and it works fine. I also install boot cam driver, and all seams to be fine.
I also discover that when I reboot from Seven, it start Seven. And when form Windows Seven I got to Control Panel -> Boot camp and I restart on OS X.
And from OS X I restart my laptop, it starts OS X.
So If I retart my system, it will restat to the OS it has been restart from.
My question, when I Start my workstation, how can I do that from one piont it let me choose to which OS I want to start. (Excepted from olding the "option bottom"?

Help with queries about boot camp and partition, please.

Hi, I am hoping to partition my HDD. I have done this before, when I first got my macbook but got rid of it, and now I can't fully remember the do's and don'ts' of boot camp. I just need a few questions answered before I take any action.
1. I have a 120GB HDD with about 15GB free space. If I partition the drive will I lose any data on my existing HDD?
2. What is the minimal amount of space I can partition the drive and install Windows?
(I have a copy of Windows XP SP2, and really only need to install it for the use of one program that isn't available on the Apple operating systems.)
3. I tried using Parallels in which Windows took up about 6GB, will it be about the same again? I uninstalled it because I found it to lag a bit.
If you can help with any of these queries I would really appreciate it, thanks!

Maybe you should first get a larger drive; you don't have much more than the minimum 10% free space that Mac OS needs.
Retry with Sun's VirtualBox. Maybe you just need more memory.
Lose data? Step #1: backup.
You may need to backup and erase your hard drive and then restore.
I'd invest in 300GB drive though.

Problems with Boot Camp and Drive Partition

First of all, let me preface this by saying I have in the past successfully partitioned my drive and installed Windows, but it was a while back and I can remember it was frustrating, but I don't remember the exact details. Also, I apologize for the rambling nature of this problem, but I'm trying to give as much relevant information as possible and walk through the steps I took to get where I am now.
Feel free to skip ahead to the end, the main problem seems to be I tried to create a 300 GB partition, but it didn't take or something. Now my storage is reflecting I've lost 300 GB, but it won't recognize the existence of the new partition.
Let me just walk through what I did. I deleted my previous partition because I was having some difficulties with a few programs and the partition ended up being too small and I wanted to make a bigger one anyway. I only use it for gaming and didn't care about any of the saved games so I just deleted the partition and figured I'd start over from scratch.
Before I begin, some technical details about the computer I'm working with. I don't know how much of this is necessary, but here it is:
It's a 27-inch late 2012 iMac with a 3.4 GHz Intel Core i7 processor with 24GB RAM running OSX 10.9.4
The storage space is a little more difficult as that is part of the problem I'm running into, which I'll get to in a minute.
Anyway, I have a Windows 7 Professional install DVD and a burned CD called Boot Camp, which I think is the drivers from last time I installed Windows (a year and half ago?), but since I needed Superdrive for the install DVD I just used an XHD I had to put the drivers on (like I said, I don't remember how I did it last time). I go through Boot Camp and look at how much space I have and how big I want to make my partition.
Side note: Last time I made my partition, I'm fairly certain I set it to 200 GB, but the partition size actually came out to something like 112 GB or something significantly less. I didn't know what happened, but figured it would still be enough space and it had been such a hassle I didn't bother doing it again.
Supposedly I have a 1 TB HD, and I can't remember exactly what it said when I partitioned the drive this time, but it definitely said I was using less than half of my capacity and I had plenty of room, so I opted to go for a 301 GB partition (the slider wouldn't let me do exactly 300) which still left me with around 300 GB of space left over on my Mac partition I want to say. I went ahead with it and it started partitioning the drive with the blue line moving very slowly and after an hour or so it was like 80% across but no longer making progress. I looked online and people said that shouldn't happen. I cancelled the partition and the Disk Utility showed the partition, but said it was unmounted or something.
I restarted my computer thinking maybe I'd try and see what would happen if I tried to boot it up as if I had Windows installed. I also at that moment remembered that I'd had a similar problem last time because I had my XHD plugged into my USB port so I unplugged that and held down OPT. It then showed me my Mac HD drive and a CD icon that said Windows, so I clicked on that figuring maybe I could install it after all.
It led me through a Install manager and it got to the point where it asked what drive/partition do you want to install Windows in, I recognized the screen and remembered I was supposed to choose a certain one, but couldn't remember which one and none of the sizes seemed to match the storage I had allocated to the partition. One was about 200 GB and since the last time I did it my partition came out 100 GB smaller than I had set it for I thought maybe that was it.
However, it said I couldn't install on that drive for some reason (I can't remember exactly what it said). So I restarted again and figured I'd go back and see what I did wrong and start over. When I check Disk Utility it no longer sees any partition (mounted or unmounted or anything) and that the entirety of my HD is dedicated to Mac HD.
The problem is, now I'm getting weird reports about the size of my drive, the amount used, and the space available. Disk Utility tells me I have 1.12 TB capacity, 301 GB available, and 819 GB used. That doesn't even add up. Furthermore, when I click get info on Macintosh HD, it tells me I have 810 GB capacity, 364 GB available, and 446 GB used. When I click on About this Mac and go to System Report and storage I get this:
Macintosh HD
Available: 364 GB
Capacity: 810 GB
Logical Volume Group:
     Name: Macintosh HD
     Size: 1.12 TB
     Freespace: 301 GB
Physical Volumes:
     disk0s2:
   size: 121 GB
     disk1s2:
     size: 999 GB
Now I really don't know what to make of it. That 301 GB free space makes sense as the partition I tried to create and if I add that to the 446 GB used on my Mac partition, plus the 364 GB available, that adds up to 1.12 TB (roughly, I've rounded off these numbers).
But how come Disk Utility doesn't recognize the partition then? What should I do from here?
I couldn't find anyone asking this exact type of question or running into this same problem before, so I hope I'm not asking about something that's already been answered. If that's the case, if you could direct me to where I can find the answer I'd be appreciative.
Otherwise, any help or light that can be shed would be most appreciated.
Thanks!

The problem seems to have gone away. I did click on repair disk in Disk Utility, I'm not sure if that did anything, but now when I run Boot Camp Assistant it is showing me the correct free space, so I don't know what happened. Oh well.
Still having trouble getting the **** thing to partition, but that topic is covered extensively elsewhere.

Boot Camp and Windows 7 Problems

I have found a reproducible bug with Boot Camp and WIndows 7.
Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7.
Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at the hard drive. Also, intermittent Spotlight hangs, and weird Dropbox behavior where it churns the disk like crazy again.
I have Paragon NTFS for Mac v 7.03 and perhaps this has something to do with it.
After retuning to a single partition using Boot Camp Asst. (deleting the Win 7 partition), all is back to normal - Repair Permissions takes about 60 seconds, no Spotlight or Dropbox issues whatsoever.
Using Fusion for Win 7 for now. Awaiting official Apple support of Win 7 in Boot Camp.
Wondering if anyone else can confirm this behavior where you have a partitioned boot drive with 10.6.2 and Win 7, with or without NTFS for Mac 7.03.

Addendum: on reboot/option key boot screen, it showed OS X volume, Win 7 Volume, and EFI Boot Volume - the latter had never been there before with Vista.

HT5628 i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

Problems with Boot camp and External HDD's

Hi, I recently installed windows XP using Boot Camp, and everything worked fine, until yesterday when I tried to reboot into MAC from WINDOWS. It restarts back into windows everytime, and now I can't get back to mac! (using leopard, not snow leopard) Whats wrong?
Another thing, I have a 500gb Lacie ext HDD, and I can use it fine with mac, but when I tried to access it with windows, it won't work. It will appear in My Computer but when I log in it won't access the data. What can I do?
Im using the HDD for backups with time machine, is this why windows cant access it?
Thanks in advance

FAT32 will accessible from both Windows and OS X
If you don't want to reformat your ext drive you need something like http://www.paragon-software.com/home/hfs-windows/ or http://www.mediafour.com/products/macdrive/

Unable to install Boot Camp and Windows 8.1 on Mac Mini

Hello,
My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
Thanks,
Doug

Poking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
So, I'm doing exactly what I did before (I think), but now the windows installer won't start.

Installing Windows 7 RC1 with Boot Camp AND Parallels?

I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

Help Put An End to Windows Activation Issue in Boot Camp and Fusion

Several people have indicated you should set it up Fusion first before you activate Windows. Does that mean you activate in Fusion before Boot Camp? What is also not clear is the reason for this and whether this bypasses the issue of having to activate Windows twice - once in native mode (Boot Camp) and once in VM (Fusion), if you intend on using Windows in both Boot Camp and Fusion.
I'm hoping to finally put an end to this ongoing question and issue since I've yet to find a definitive answer on several boards. The only answer I was able to find was that you have to activate Windows in both native and VM but this obviously conflicts with what a few people have posted, unless of course I have misinterpreted what they've stated.

Thnx. My MBP has a built-in optical drive, so that explains the first screen without the option to create the installation disk.
So the problem remains to get Boot Camp recognize the installation disk. I tried to create an 8 GB (and after that even a 16 GB) installation disk on a USB stick and add the Boot Camp files to this stick. Next screen, Boot Camp still asks to insert the Windows Installation Disk. After that I burned the iso on a new DVD to be able to insert an original disk in the optical drive, but even this did not work out.
Today I called Microsoft to tell me whether I was taking the right steps, but this guy couldn't help me either. "I should not install windows in a partition, but I should use parallels to install it under iOS..." ?
The iso I have is an original disk image of Windows 8.1 Pro NL, meant to make a clean install. So what am I doing wrong?

Screen freezing, leopard won't load, boot-camp and parallels,

This problem started a while ago, around the time that I installed boot camp so I think it may be related. Sometimes when I am playing a DVD or a game or using something I've downloaded my macbook will freeze or automatically restart. It happened once a week or so and afterwards it wouldn't load, it would sometimes gets as far as the gray screen and the loading symbol and the freeze and restart and this would happen over and over again and would happen on the windows and mac partitions of boot-camp. I got a bit sick of it so uninstalled boot-camp and decided to try parallels instead, the problem is even worse now and the screen will freeze but will restart up to leopard fine but a while later it will freeze again or sometimes it will do as soon as the logins screen appears. What could be wrong and could it be related to having windows on my computer as it seems to happen quicker when I am on windows. Any help appreciated.

+*I'm trying to install Snow Leopard from an external harddrive*+
Is there a reason that you are trying this method as opposed to using your DVD?
Do you have a working installation of Snow Leopard on the external drive or have you tried to create a bootable image of the install media on the external drive?

Lose airport connection after using boot camp and windows XP

After using windows XP on boot camp and shutting down windows and booting to Mac OS 10.5.7 I lose the airport connection and have to restart or reset my airport extreme base station. My imac 2.8 is connected to airport via ethernet. Air port is operating on 5.7 version. This is a recent development and suspect it is related to updates in windows. I do not know where to start but need to solve this problem as it interrupts the other computers on wireless. Thanks Carl

I have solved problem. It was in the windows settings using airport rather than ethernet connection. Carl

Lion, Boot Camp and Windows 7 Issues

Couple of questions regarding Lion, Boot Camp and Windows 7... I never had issues with Snow Leopard and setting up Windows 7 on my iMac (expcept the dreaded black screen after restart, bu got that fixed)
Let me start off with my specs and then I will ask my questions:
iMac 27"
i7 Quad Core (1st gen)
16GB Ram
1TB HDD
OS X Lion (Fresh Install - Not Upgrade)
All updates for OS and iLife and other installed software:
Adobe Creative Suite CS5
MS Office 2011
Boot Camp 4.0
Window 7 Ultimate
Ok... here are my questions.
When I fixed my black screen issues after installing a fresh copy of Windows 7 - I had to install MacFUSE and Tuxera NTFS in order to delete the the stock ATI driver so the second rebot on the install of windows 7 would work and boot correctly. After rebotting into my mac side I now always get this message from Tuxera.
What does this mean? Now in the finder when looking at the computer drives.. It does not show the BOOTCAMP partition...
However, when I resart i can hold down the ALT key and get this menu:
I know this might seem strange to ask, but why are the Macintosh HD and the Recovery HD text smoothed and the Windows text not? Being a design I see the difference and it makes me wonder why this is. (It is almost like the BSOD icon apple used forwhen connecting with shared PCs)... Anyways, I can boot into windows when clicking this drive.
After getting to windows 7 it will not let me run updated. The OS is activated and I have even installed SP1 manually, but it always tells me that the Update service is not running. When in fact it is. I have checked it and it is set to start automatically. I have reset and shutdown my computer more than 10 times... I can't figure out what the issues are.
Overview:
Why do I get the Tuxera NTFS error?
Why can I see the boot camp partion when manually selecting it form startup, but it does not show in OS X
I can't get Windows to update? Any ideas?
Thanks for any help you can provide.

These various utilities like Tuxera are incompatible with Lion. Partly because MacFuse is incompatible. You need to remove them completely.
As for the Windows partition you might consider using Boot Camp Assistant to remove it. Then make a new partition and install Windows. Remember to use the Windows formatter to format the Windows partition NTFS.

Can you run Boot Camp and Fusion at the same time?

Hi,
I had boot camp installed on my mac pro and loved it. I decided to get greedy and install Fusion using the boot camp partition. The Fusion install went ok but then Microsoft started to get fussy. Every time I would do something on Fusion it would ask me to "Re-activate Windows" when I logged into boot camp. Maybe if I saw Fusion fully working I wouldn't want to run boot camp any more but I think I want to have the option to run either. Right now I only have 1 gig real memory on my mac pro and Fusion seems a little slow compared to native boot camp. Can I run both boot camp and fusion without having to buy two native copies of Windows XP pro? I don't want a "sensible" answer, I want an answer that takes into account how Microsoft treats this re-activation situation.
I guess Leopard might make this all obsolete, but until then .....
... Flash Gordon

You need to make sure to install VMware Tools into your virtual machine (while booted into Windows via Fusion). Once you do this you shouldn't have to continually activate Windows when going back and forth from Boot Camp to Fusion. I've seen this discussed over on the VMware Fusion discussion boards, so you may want to look there for more details.
Also, if Windows starts telling you it's been activated too many times, you can call Microsoft and they'll give you an alternate activation key. The phone number is listed on the Windows error screen. I had to do it and they were very accommodating. I just told them I was running Windows in a virtual machine, and there were almost no questions asked.
You don't need to buy 2 copies of Windows to run both Boot Camp and VMFusion.

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

HT3986 Boot Camp and Partitioning problems

Similar Messages

Maybe you are looking for