HT3986 Why my Boot Camp keep saying that there is no USB device connected ?
I use Mac Air, and with a external CD device. When I try to install Window 7, it keep saying that there is no USB device connected when there is.
Unfortunately not all external CD drives work the same, have you tried another cable or used another slot?
Have you tried using a USB flash drive? You should have an option now in Boot Camp Assistant to install the W7 installer onto a USB drive as well as the Boot Camp drivers.
Similar Messages
-
When I start up in Boot Camp it says that updates weren't properly installed and the system is reloading. It then automatically restarts in Mountain Lion. What is wrong?
I am currently using Windows 8 and also have Microsoft office installed but those are the only thing on my partitioned space. I don't know if I installed 32 or 64 version of Windows 8. Could that be the problem?Can you deal with XP not being supported by Apple and Microsoft? no security etc?
Can you use Windows in a VM instead of natively?
All the drives other than the one with XP will need to be pulled.
Always have backups of your system, clone that you can boot from.
Boot Camp 3.0 was the last supported. You don't need OEM 10.4.6 DVD and your system with EFI and SMC updates (Aug/Sept 2007) may not like it.
32-bit version of Windows on EFI-32 will only get 1.9GB RAM.
Installing 64-bit Windows 7 is a bit harder. Vista pre-SP1 64-bit was the best match for install on my 1,1 and that was 2006-2007.
The new owner needs to deal with this, not you. And really they are better off with a $400 PC instead. Or use a VM.
the owner should put in a new SSD for the system and $44 buys 4 x 2GB RAM. Together it will run just fine. 500GB SSD now $250 / $135 250GB. Biggest issue is a video card on these.
The grey screen - you upgraded the graphic card perhaps.
Unplug everything. Hit power for 5-10 seconds. Reconnect cables for mouse/kb and power, and monitor. You just reset SMC. Yes there is a small button - pull drive #4 and any controller in top slot #4 to see the SMC motherboard reset button but you don't need to.
Any PCIe cards can also play a role and factor into XP or Windows not working. -
Why does my cellphone keep saying that "estimating time remaining" when I try to upgrade the system?
Is there anyway to fix this situation?Hi Eric_Sun,
Thanks for visiting Apple Support Communities.
You may want to update your iPhone using iTunes on a computer if your device only shows "estimating time remaining" when you try to update wirelessly:
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you see an error message while updating your device, you can learn how to resolve iOS update errors in iTunes.
You can find these steps here:
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
If you are still not able to update, I recommend the steps in this article next:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Best Regards,
Jeremy -
Have a new computer with Win 7 and a new compatible motherboard and a WD 3 Terabyte HDD. itunes keeps saying that there is not enough room after 736mb??? the drive is formated and properties says it has the full 2789. Why won't itunes see it???
What specifically is being done/attempted when the message appears?
-
I just got an iPod 4th generation and Im trying to sync my iTunes songs and books from my dell laptop on to my iPod but it says I need iTunes 10.6.3. So I tryed to download it on the apple website but it keeps saying that there is an error. I have already tryed uninstalling all Apple Inc. programs on my laptop then trying to install iTunes again but that has had no success what so ever. I have started to get very frusterated with this . Hopefully someone can help. I would really appreciate it. Any suggestion?
So I tryed to download it on the apple website but it keeps saying that there is an error.
What does the error message say? (Precise text, please.) -
help!! i am trying to downgrade my ipod but it won't let me it keeps saying that there is an error.
That is because Apple does not support downgrading the iOS.
-
i do all this process but it keep saying thats there is an error (9) with the device
See this support document for help with restore errors. http://support.apple.com/kb/TS3694
-
I have the iphone 4 and i'm trying to update it but it keeps saying that there is a connection error. I have Windows and Itunes version 10.5.1. Please Help
If you're getting a network connection timeout error when downloading the iPhone's iOS update, then try temporarily turning off your firewall and antivirus software until the download has completed.
-
Hi, i have tried to update itunes in the normal way as when i opened it, it said that there was an update available. However it would not let me saying that the was a mobile device error. I have unistalled and reinsatlled it and I am still getting the same error. Does anyone know how I can fix this?
You need to do as provided. If no change after restoring as a new iPhone or not from the backup, the iPhone has a hardware problem.
-
Why does Boot Camp Assistant say...
"Boot Camp Assistant can not run until you upgrade your sytem software to the latest version."
I used DG3 to initialize the HD, which essentially erases the disk if I understand correctly. I haven't used Superduper before, so perhaps that's worth looking into.
I did mentioned the use of DG3 to ensure that I had a single disk partition. I guess the restore from a clone or Time Machine was implied...
;o)
Thanks for putting some effort into helping me. I'll look at Superduper and let you know if that gets me anywhere... -
My husband and I are divorcing and we have used his apple ID for our 2 apple tv's. He changed his password and now I no longer have access to the 300 or more movies, tv shows and music. He keeps telling me that , there is no way for us both to have it. So, since his Apple ID was the one programmed into our Apple TV's he has custody to everything. I know there has to be a solution for this, because I can't be the be the only person this has ever happened too!
Unfortunately the situation is thus...
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs
http://support.apple.com/kb/HE37
I know it doesn't help you in your current situation... but you can leave Feedback for Apple here...
http://www.apple.com/feedback/ -
I am trying to finalize a project in iMovie but it keeps telling me that there is an error (-108). Can anyone tell me what this is and how I could fix it?
r0b0c0pHi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W -
So I bought some new music on my iPhone. I put it on the computer so I could update my kids' iPods and while doing this I got a box that said it couldn't find some of my music. Then it took it off of the iPod and Phone. I also can't use some of the ringtones I bought. I don't understand. Now the things it can't find has a little exclamation mark by them.
I need help, I don't understand!!!!!I posted this about two years ago so can't quite remember how I solved it.
I've got a feeling I had to completely erase my iPhone (losing a load of notes and music playlists !) in order to fix this problem. It was a bit of a hassle if I can remember also.
Sorry. -
That happen everytime I close down iTunes, or sometimes when I add song... I'm on latest version on PC...
You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera.
iOS: Importing personal photos and videos from iOS devices to your computer -
I don't think I ever registered my 3rd gen iPod. I was never able to update it past its original software because iTunes could never recognize it. Unfortunately, my wife had installed data on it (old & recently purchased) so I've been very hesitant to "Restore" it. I recently plugged it into my laptop & it prompted me to install the iOS 5.0.1 software, but after multiple attempts to do so iTunes keeps giving me the same error message "update install failed. Connection to the update software server has timed out". How do I update the software without losing all my wife's data?
If you already have iOS5.0, Go to settings-general-software update, scroll to the bottom and hit download and install and this should update it without the computer. Then when you connect the iPod to iTunes, it should say 5.0.1. If this doesn't work, DON'T ERASE IT. Just bring it in to Apple. I had the same issue trying to update to 5.0. and eventually I got it to work after waiting for a little while. Good luck!
Maybe you are looking for
-
Hello. Just the other day I finally updated my iphone 3G so I could send MMS/ Picture messages but it doesnt seem to be working. Whenever I try to send an mms it starts to send (the sending bar comes up) but it can never fully send the message and th
-
Cannot resend messages in adapter engine
Hi all, I encountered thousand messages in adapter engine yesterday with error category: XI_J2EE_ADAPTER_ENGINE, error code: JMS_TRANSMISSION_ERROR. First I checked the affected communication channel, and there was an error in MQ side. Also, our data
-
Webservices support in weblogic 5.1?
I need to expose a functionality ( available in weblogic 5.1 ) as a webservice to non-J2ee clients.Since there is no support for webservices in WL 5.1 how can I do that ? Is weblogic ver 6 or 7 is mandatory for this?
-
I configure a managed bean TestBean which has a managed property List testList in the[b] faces-config.xml,but I get a wrong value in the program. For example: face-config.xml <managed-bean> <managed-bean-name>testBean</managed-bean-name>
-
Error when opening programm again
I open the file, start the programm.It opens DeviceNet. It's working properly. Then I stop the programm and close the file. Then I open the file again and start the programm again. After one second, the errormessage, which is shown in the picture app