HT4060 I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual

I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged  my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.

Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout

Similar Messages

  • HT201177 I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram

    I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.

    The latest version of Adobe FlashPlayer can be obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
    You can check here what version of Flash player you actually have installed:  http://kb2.adobe.com/cps/155/tn_15507.html
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • My ipod touch will not switch on and is no longer recognised by itunes.  Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.

    My ipod touch will not switch on and is no longer recognized by itunes.  Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.
    I tried to restore it and I got error code 2009, so I closed it tried again got error code 1659, now it wont do anything and it's not recognized by my pc /itunes please help x

    For the restore error messages try:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

    Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got  extra money to spend..

    Just what happens when the restore does not complete?
    Error message?
    Does it freeze? Is so what is listed in the status bar of iTunes?

  • Having some problems with my c6-01

    Hello there, I have recently bought a nokia c6-01 but I am having some problems with it. Such as, sometimes it freeze and it restart itself then it continues as nothing happened(dont ask me my pin code) my other problem is when I assign ringtone to my contacts it does not bell the tone normally , it plays the music in weird tone (btw my phone play that ringtone normally in music player ) what can I do against these problems ? Is this a software or hardware problem? Should I take it to the provider? Thanks.

    random reboots are quite common
    try updating the software before you do anything else.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Can someone please tell me the cause of the msg-The song could not be used because the original file could not be found- and how I might correct that problem?

    Can anyone please tell me the cause of the msg-The song"    " could no be used
    because the original file could not be found-and how I might correct that problem?  Lou

    I stupidly tried to copy my music files to an external drive so I could transfer them to my new iMac (old Macbook Pro is being retired). I now know I should've tried home sharing or something to transfer the music.
    Anyway, the situation I am in is that I have not managed to transfer anything and I now cannot access the music on my old Macbook Pro either! I have the message "the song 'xyz' could not be used because the original file could not be found. Would you like to locate it?". I understand that this is because iTunes cannot locate the files. When I try to locate the files I find nothing.
    I have tried searching my whole Macbook Pro for mp3 files and m4a files and Spotlight cant find any! The tracks are all still listed in iTunes. I also searched the external hard drive. I definitely haven't deleted anything. So where could they have gone and is there anything else I can do to search for them? I have a feeling I am just not searching for them in the right way because I have not deleted anything.
    Old computer is Macbook Pro OS X 10.6.8 with iTunes 10.4.1
    New computer is iMac OS X 10.7.2 with iTunes 10.5
    All I want to do is to set everything back to how it was so I can try the transfer a better way.
    Please help. Thanks, Dashford.

  • I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can

    I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.

    Read this: iOS 4: Updating your device to iOS 5 or later
    ... oh I think it is a 3gs or a 3
    This makes a difference. What does it say in Settings > General > About?

  • Having some problems with apps froms the app store

    Hello. Since I got my iTouch I've been having some problems with some apps. Some work perfectly fine, but some others are just crashing after a few seconds. I've tried everything I found, but it seems like my problem is different from the one related by lots of others iPod users. Here's a video a friend of mine who's having the same problems I am did showing it:
    http://www.youtube.com/watch?v=MI-gBhP_cgU
    It's really annoying us. Does anyone know how to fix it? Does it look like a firmware problem? Thanks in advance.

    Have youy tried:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - iOS: Troubleshooting applications purchased from the App Store
    - Restoring the iPod from backup
    - Restoring the iPod to factory defaults/new iPod.

  • Hi, guys. I have some problems with my ipad. It has been switched off and it does nor respond on any actions

    hi, guys. I have some problems with my ipad. It has been switched off and it does not respond on any my actions

    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Having a problem with my ipad... I tried to install ios and the ipad has frozen

    I am having a problem with my Ipad air.  tried to install ios and my ipad has frozen

    Click here and follow the instructions.
    (124611)

  • I've updated all my software and iTunes on my Macbook Pro but when I went to open iTunes it tells me it's either corrupted or not installed correctly and to reinstall it. Is there anyway to fix it without reinstalling the whole program?

    I've updated all my software and Itunes on my Macbook Pro but when I went to open iTunes it tells me it's either corrupted or not installed correctly and to reinstall it. Is there anyway to fix it without reinstalling the whole program?

    Here's a previous discussions that seems to have solved a similar issue in the past:
    https://discussions.apple.com/message/12209861#12209861

  • Just bought a new 5s but when i take a picture it doesn't appear in the camera roll

    Just bought a new 5s but when i take a picture it doesn't appear in the camera roll

    Is your camera restricted?  Check Settings > General > Restrictions

  • I´m having some problems with dates intervals. It´s not working well. I inserted the correct date between the right interval but the system refers to incorrect date? What shoul I do?

    Mensagem editada por: Mauricio Galletti
    It seens that there´s some problem with the specific date of 19/10/2014? Don´t know why? I just remove this date from the interval and the problem gone.
    What´s wrong with 19/10/2014?

    Hello Galdr,
    Welcome to the HP Forums.
    I see that after doing some updates, you've lost the use of switchable graphics in your Notebook. I will do my best to help you with this.
    You can try is to use the HP Recovery Manager. This will allow you to "recover" the Notebook and reinstall the original drivers. This document: Using Recovery Manager to Restore Software and Drivers (Windows 7), can assist you with that.
    Once the drivers are "reverted", then if you wish you can attempt updating.
    This first thing I will provide you in regards to updating is this document: Switchable Graphics on Notebooks Configured with Dual AMD GPUs. There is more general information than anything, but you may find it useful.
    When going to update you will want to use the website or the HP Support Assistant. These are the recommend ways to update. When using AMD's (or other OEM utilities) they will look for compatible drivers for the component, but not necessarily ones that work with your Notebook. What most likely happened, only one of the two drivers were actually updated.
    Here is a link to the newest driver provided by HP: AMD High-Definition (HD) Graphics Driver. Also, here's a link to using the HP Support Assistant: Using HP Support Assistant (Windows 7). (in case you wanted to learn more/use this method).
    I hope this is able to help you get back to "state 1", so that you may be able to update correctly and have full functionality of your switchable graphics again. Please let me know how this goes for you. Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • I am having some problem with my battery, always at 99%, led light not work

    Hi,
    I just purchased my macbook 2 weeks ago. The battery was perfectly fine on the first 2 week. After fully charge, led light turn from amber to green as what it suppose to be.
    But since today, when I plug in my charger to my laptop, the led light wasn't on at all but based on the battery icon shown on mylaptop, it is charging slowly.
    I tried to unplug the charger and replug it in again. It turns to green ( while the icon shown 60%) and 3 sec later, the light off again.
    unplug-replug again, it turns to amber, a few sec the light turns off again. and it just keep on and off.
    I am a bit confused. I rang up apple helpline, they suggested me to reset the PRAM which seems work.
    restart my macbook. the charger turns to amber and charging till 99% and not turning green anymore.
    is that normal?

    This is a quote from the page I bookmarked for you to read. "The System Management Controller is an integrated circuit (computer chip) that is on the logic board of the MacBook or MacBook Pro. As the name implies, it is responsible for power management of the computer. It controls backlighting, hard disk spin down, sleep and wake, some charging aspects, trackpad control, and some input/output as it relates to the computer sleeping."
    The SMC used to be called the Power Managment Unit. I am surprised that apple did not have you reset this also.
    If the battery fall below 96% it will start a charge cycle. Have you callibrated the battery.
    It is hard to diagnose the problem till you try all the steps. Let us know how it turns out.
    Mort

Maybe you are looking for

  • Refreshing All Clients  when an Event Happens at Server

    I have web application in which some pages/entities should be viewed by only one user at a time. when a user moves to a new page that event should be broadcasted to all other clients , giving access to that page for all other users. i have developed

  • Link between CRMD_ORERADM_H and SA01PHIO

    Hello experts, I have an issue in relating the CRM header Table CRMD_ORDERADM_H with Solution manager table SA01PHIO(which holds the details of Documents attached in Solution manager Document Assignment block on WEB-UI.) Can you all kindly help on sa

  • New Toshiba Laptop!

    I want to buy a new gaming laptop and i really love the qosmio series but its VGA is a bit outdated if we consider the new DX 11 cards... will Toshiba release a new gaming latop anytime soon? I heard about the new 3D laptop but i don't want a 3D lapt

  • I just recently got a pop up message "Your Apple ID

    I just recently got a pop up message "Your Apple ID & phone # are now being used for a iCloud on a new Mac"  Didn't get a new Mac; but did just do the new update that I received today.  Anyone else get this?  Thanks in advance!

  • Manual tile with bleeds doesn't print all crop marks

    When I try to print out a manually-tiled print with bleeds, the top of the page doesn't print a bleed and not all the crops print. How do I resolve this? Michael