HT4061 I downloaded an iTunes update on my HP. PC and restarted the computer for the hangers to take effect. Now my pc is locked up. It gives me a client Mac address and no boot file name received. What happened, and how do I get my pc back?
I downloaded an iTunes update and when ashen I restarted my pc it locked up. It says client Mac address 001320bead25, PXE E53 No boot file name received. PXE MOF. Exiting Broadcom pie rom. How do I get my pc back!
When you installed iTunes on your work computer, then connected your iPad to that computer, it wiped what was on the iPad, then put the iTunes library (nothing) from the work computer onto the iPad. You can try copying the iTunes folder from your home computer over to your work computer, but since the apps were bought with a different account, they may not load or update properly.
Similar Messages
-
I went thru upgrade to ios7, then a few days later there was an alert in settings, so I clicked on the update to THAT upgrade... then my phone went black... no turning off or on. So I plugged into my PC and it will only show an iTunes logo a small white arrow up and then a pic of hte cord attached.... computers won't recognize phone, but sometimes show a 'device' there, but no opening anything... and it shows NO device driver for apple iphone. what's happened??? HOW dod I get my phone back! This is a work phone... need asap! thanks!
Restore the backup from your computer
-
jute way pc locked up after iTunes update. It says client Mac address 001320 be ad 25 . PXE E53 No boot file name received
pXE MOF. Exiting Broadcom PXE. ROM . How do I unlock my pc?jute way pc locked up after iTunes update. It says client Mac address 001320 be ad 25 . PXE E53 No boot file name received
pXE MOF. Exiting Broadcom PXE. ROM . How do I unlock my pc? -
Gateway pc locked up when updated I tunes. Only have message no boot file name received . How do I get this resolved?
Gateway pc locked up when updated I tunes. Only have message no boot file name received . How do I get this resolved?
-
Since installing 10.7.3 my downloads say that I do not have enough space on my computer for the download. These downloads are never more that 200 megs or so and I have 270 gigs left on my hard drive. Somehow the remaining space on my hard drive is not being correctly read. What can I do to fix this? I have run permissions repair several times, but to no avail.
Th downloads do not finish. I am dowloading to a file on my desktop called MUSIC, but it first starts to download to my desktop and then I move it to the MUSIC file also on my desktop and I have been doing this without incident using 10.7.2 as well as 10.7.1 and 10.7.
-
I have just downloaded all of my music into the new itues, however; all of my music has an "!" but it and I get an error that says " original file can not be found".
How do I get my music back?Ok, I had a glitch, forced to restart, and lost my train of thought.
Reinstalling iTunes should fix the major issue that might have gone wrong, perhaps your explaination points will disappear and everything will be peachy again.
But if they don't, you can open the XML file in iTunes Folder using a Text edit program to see what the common pathname is to the iTunes Music folder or where your content is located.
If you moved the itunes folder, it needs to go back.
I can't download iTunes to my Vista virtual machine to test it out right now because iTunes is down, so I can't verify the pathname, perhaps your issue and the iTunes being down are related somehow?
You don't want to import all your music again, but it's a option, but you lose all your playlists, that's what I'm trying to recover.
If oyu don't have a whole lot of playlists, then simply select all the explaimation point music and delete, select File from the menu and import your itunes folder again. -
I downloaded the new version of iTunes and now over 100 songs have an exclamation mark beside them and won't play. The message says: "The song ... could not be used because the original file could not be found." How do I get these songs back?
Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.
-
When downloading, previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once. Now that isn't happening. How do I get that feature back?
When downloading, previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once. Now that isn't happening. How do I get that feature back?
-
When I purchased my Mac six months ago, I transferred my Quicken files to Quicken Essentials. That worked fine until yesterday. Now I'm getting messages that there is not application to open the files, or that it just plain can't open the file. What gives here? What happened? How can I get back in?
Launch the Quicken application and try to open the file from there, if you haven't already. If that fails, and a simple restart of the computer doesn't help, try reinstalling the application. If that doesn't cure the problem, I would suggest you take this up in the Quicken Community:
https://qlc.intuit.com/app/full_page
or with Quicken support:
https://quicken.custhelp.com/app/contact/plvl1/win
You'll be most likely to get further help with your issue there.
Regards. -
i plugged my ipad 2 into the computer for the first time and all the music from the itunes converted on however now it wont delete it comes up with 'ping' next to the song
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
i lost my itunes dat my system is updated.now wen i conncted iphone to my pc i did backup from "on this phone"tab i lost music wen i syncd how can i get my music back.ive nt dne back up to ny othr extrnl devices.
Rebooting computers does not cause files to disappear.
Goofy fonts do not encourage others to read or respond. -
When I plug my device into the computer for the first time the setup process doesn't begin. What do I do?
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
Since syncing with iCloud all my photos in my photo app are much lower resolution than they were before. Can anyone explain what happened an how I might get back my high resolution photos?
Thanks again.
Unfortunately I don't have iPhoto (running Windows).
I did, however, figure out a work-around.
I created an empty directory on my computer, and told iTunes to "Sync Photos from..." that empty directory. This deleted all the photos from the iPod (go figure).
I then set the "Sync Photos from..." dropdown back to directory that actually contained all my photos, and sync'd again.
And, yes, they all loaded onto the iPod at their better, higher resolution.
Thanks for all your help. Photos (and wallpaper) are perfect, again -
When I plugged my iphone into the computer for the first time i lost all my music and ringtones. Is there a way to get them back without buying them again, or will I have to buy them again.
Download the free app My Contacts Backup and use it to back up the contacts on your device now (it will back them up as an attachment to an email that you send to yourself). Then restore your device to your most recent backup to see if it will recover your contacts. If not, if necessary you can open the email and tap the attachment to re-import the contacts you have now back to your device.
If you need to restore to an iCloud backup this has to be done in the initial setup process, which requires you to first erase your device. If you have any more recent data on your device now that is not in the backup that you want to save you'll need to do that first. Then go to Settings>General>Reset and tap Erase All Content and Settings. You will then go through the setup screens on your device, and when given the option, choose Restore from iCloud Backup (see image below). Be sure you are connected to wifi and your charger as this will take some time to finish. -
When I open "mail" all that opens is the gray ribbon on the top.I have to go to "Mailboxes/inbox" to get it to aspen. What happened? How do I get the full screen to open when I click my "mail" icon like it used to?
Move your cursor way over to the right side of the window. There should be a thin bar. when you hover over the left side of the thin bar, the cursor will change to a vertical bar with an arrow sticking out the left. Click and drag to the left.
Maybe you are looking for
-
Problems with permissions on file-repositories
Hello Forum, i'm getting confused while i'm testing the differences between the acl/w2k security managers. My Konfig: Networkpath filehost\ep6 user domain\j2ee (this user has full-access to all docs) then i
-
Error When updating LM-TOOLS ot 7.0 SP 23 from SP 18
#1.5 #001F29CCB5200072000000020000031C000499A3E6D73229#1294829138269#com.sap.engine.services.webdynpro.WebDynproContainer##com.sap.engine.services.webdynpro.WebDynproContainer#J2EE_ADMIN#7285##n/a##179860551e3911e086ec00000079d47a#SAPEngine_Applicati
-
Hi, I just bought the Audigy value soundcard, but when I installed it using the drivers provided in the CD. My windows volume control is displaying chinese characters instead of english, also the creative surround mixer display ? instead of the prope
-
Upgrading ECC 5.0 to ERP 6.0 EHP5
Hi - We are planning to upgrade our ECC5.0(our present ECC 5.0 is on support pack stack 19) to ERP 6.0 EHP5.We are going to give a try in our Sandbox system first.So I have the following questions 1)Can we upgrade our ECC 5.0 directly to ERP 6.0 EHP5
-
Another Develop Module Crash...
Yep, once again, doing some crops on 100 images. Faulting application lightroom.exe, version 2.1.0.1, faulting module ui.dll, version 2.1.0.0, fault address 0x000deb91. Faulting application lightroom.exe, version 2.1.0.1, faulting module ntdll.dll, v