HT4061 I have upgraded my iPhone 4 to OS 7.0. I am going thru the setup, but cannot get past the Terms and Agreement page after pressing the Agree button
I have upgraded my iPhone 4 to OS 7.0. During the setup I pressed the "Agree" button for the Terms and Conditions. I would not take me to the next stage in the setup. Everytime I apress the "Agree" buttion it pops up a dialog with the "Cancel" or "Agree" buttons.
Reset the device and try again.
Similar Messages
-
HT4623 Can not get pass Term and Conditions page after upgrade?
Can not get pass the Terms and Conditions page after upgrade?
Restart your phone and if that doesn't help, reboot the device.
Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up. -
can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected. what do I do
I have been looking for over a week now and even chatted with the USA but cannot get it to work.
I am really strugglingThanks
someone named Eloisa she gave me a phone no. or visit hp.com/uk
cannot make head nor tale of it all. I am old. and find everything hard to undertstand -
I HAVE SUBSCRIBED TO ACROBAT PRO, BUT CANNOT GET IT TO WORK ON MY PC AFTER THE DOWNLOAD
i HAVE SUBSCRIBED TO ACROBAT PRO, BUT CANNOT GET IT TO WORK ON MY PC AFTER THE DOWNLOAD
Windows 7 operating system....constantly pops up with a window that says I am not on the internet and can't register my product....obviously I am on the internet at this moment because I am posting on an online forum. I downloaded the software four times now, after uninstalling it three times. I downloaded XI Pro.
-
after updating my iphone 3gs from os 4 to os 5.1.1, it left with activating the phone but i've been trying since and is still not activating, the notification given is ''activition server temporarly unavilable". can somebody help me out?
First use JPanel not Panel.
Panel panels[]=new Panel[4];becomes
JPanel panels[]=new JPanel[4];Then refactor your code so that you use arrays correctly:
panels=new Panel();
panels.setLayout(new FlowLayout(FlowLayout.LEFT));becomes
panels=new JPanel();
panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
I did the above changes to your code and it worked fine.
Dave -
I have just successfully updated my iphone 4 with the latest ios update but lost all my apps. I can find them on my itunes a/c but cannot get them to transfer back onto phone without downloading all again, what I am I missing?
Is "Sync Apps" in the apps tab checked? If it is and they still won't sync, uncheck it then run a sync, then recheck it and run the sync again. If that doesn't help, on the phone itself, go to your app store, tap on updates, then go to purchased, and tap the cloud button next to them to redownload.
-
Frozen on terms and condition page after software upgrade, can't go any further. Please help.
after upgrading my ipad2 operating system from my computer, then unplugging went through unlocking and welcome to new OS then at terms and condition page screen has frozen and will not allow any selections of blue text or procedures to future screens. we have rebooted ipad and went back to exact same screen. Is there any chance a restore can be done from icloud?
Hi bullcell,
Welcome to the Support Communities!
Here are a couple things to try:
Restart and / or reset your device
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Check your settings for Safari -- enable cookies and turn off private browsing
Safari settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPadabb26b71
Cheers,
- Judy -
I have an update for an app which I cannot update as it requires ios6 which I cannot get on my iPad - how do I get rid of the little red number? It is really annoying
Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support -
I have an Apple iPad Mini With Wi-Fi 16GB and a Rock Bluetooth keyboard that was previously used by my daughter. Her information was erased from the ipad and I have set it up as a new user under my account. All went well until I tried to set up the keyboard. When I go to Settings and turn on Bluetooth the ipad does not detect any device. I know they were paired and working when she was using them. Could it be because the ipad/keyboard were operating with her account and know won't connect to mine? We do not live in the same city so how would I clear the keyboard so that I could connect it to a 'new' ipad?
Hi sugaliko,
You may need to set up your BlueTooth connection to the keyboard again. Use the steps in this article for guidance -
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
Thanks for using Apple Support Communities.
Best,
Brett L -
I have recently started using iCloud on my laptop syncing it with my iPad. When the syncing process starts it stops and gives me a message something like: You do not have permission to sync this folder. Then it wants me to unlock and gives other suggestions. I have done them all and still cannot get the syncing process past this folder. I is a folder in my documents. Anyone have any solutions?
If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback -
I have been to the bottom of the application site where you can hit either save and return later or apply. but now it stops before the end of the application and won't let me move any further down the webpage.
Samaia wrote:
Recently switched to Mac and I was a IBM keyboard shortcut maniac I love them.
So far I haven't been able to get my Cmd+Down or Cmd+Up working as described (e.g. move cursor to end or beginning of document) when using Word 2008.
So . . . I updated to Word 2011 - and it still isn't working . . . please tell me there is another short key that I haven't found yet. The Cmd+Down and/or Cmd+Up only take me up or down a paragraph and Fn+Up or Down seem to be the equivalent of clicking the scroll bar up and/or down one page worth.
Is it difficult to trigger the menu item entitled "Keyboard Shortcuts" in the Pages Help menu ?
Yvan KOENIG (VALLAURIS, France) mardi 22 mars 2011 19:38:46 -
I upgraded Thunderbird a few minutes ago, but now I see there are messages in my Inbox, but I can only see the folder, the emails are not accessible. Nor can I seem to send messages, read messages, get to my Address book. I have normal menu bar at the top, the left panel is the normal list of folders, but on the right where I should see emails, as I have clicked on the Inbox, I see
Thunderbird Mail - Inbox
EMAIL
Read messages
Write a new message
Accounts
View settings for this account
Create a new account
Email Chat Newsgroups Feeds
and so on, These are listed in groupings, which I can't effectively show, but I can't do any of these things.''realfire [[#answer-666634|said]]''
<blockquote>
''realfire [[#question-1037151|said]]''
<blockquote>
I upgraded Thunderbird a few minutes ago, but now I see there are messages in my Inbox, but I can only see the folder, the emails are not accessible. Nor can I seem to send messages, read messages, get to my Address book. I have normal menu bar at the top, the left panel is the normal list of folders, but on the right where I should see emails, as I have clicked on the Inbox, I see
Thunderbird Mail - Inbox
EMAIL
Read messages
Write a new message
Accounts
View settings for this account
Create a new account
Email Chat Newsgroups Feeds
and so on, These are listed in groupings, which I can't effectively show, but I can't do any of these things.
</blockquote>
I even uninstalled Mozilla and then reinstalled it, but apparently, that didn't work, as it found my account settings, instead of my having to reset them and I was right back where I was before.
</blockquote>
Actually it did not answer my question, I still need resolution. -
I do not know how to go past typing my password during configure to select SELECT to enter what I have typed. This is using a silver remote.
Just keep navigating in the direction of the button.
-
After recent update, cannot find my ringtones. Tried syncing and they don't come back. Only 1 list in the contacts to be selected. Tried to sync the ringtones by themselves and it still won't sync them back to the phone.
These are iTune purchased ringtones.
-
i have tried to create a photo book and made the mistake of trying auto fill I got a number of pages and many pics i do not want I found a way to eliminate the pics but cannot get rid of the pages unfortunately the inside back page and the back page are also there ANY IDEAS
At the bottom of the photo tray at the right click on the Clear Placed Photos button. This will remove the photos from the pages but not from the book.
Click to view full size
OT
Maybe you are looking for
-
Run CLEAN_REQREQ_UP withou logical system
Dear Experts, 1) I created some POs from the SOCO. 2) I deleted the POs and the SC items didn't come back to the SOCO. 3) I run the CLEAN_REQREQ_UP report with a logical sysem and nothing happened. 4) I run the CLEAN_REQREQ_UP report without a logica
-
IMac 24" core 2 duo - sudden video + startup issue
Hi I have a 24" intel core 2 duo 3.06 ghz from 2009 running snow leopard latest version Last night the screen froze with a bizarre array of colours and video weirdness. I had to restart. Since then there is a weird black pattern over the whole screen
-
Is there something wrong with the following applet declaration? <applet code = "Sheep2.class" archive="Sheep2.jar" width = 500 height = 300 ALT="If you could run this applet, you'd see a sky, a field, and a moon."> Your browser is completely ignoring
-
Attributes with junk data using ldapsearch utility
Hi, We have Enterprise Directory 5.1 V2 installed on HP-UX. We have a issue when viewing data through ldapsearch utility. 1. some attributes for employees have blank values(one space),this we can see from the console. This was added manually through
-
Customizing Reader 10.1 install
I recently downloaded the Reader 10.1 update. I use the Adobe X Customization tool to customize the initial install package for 10.01 to remove auto update, etc. However, when I install the 10.1 update, it removes all my customizations! How can I