HT4061 Lightning connector is missing when I unpacked IPhone 5 Box!

A freind of mined ordered a Iphone online recently on my behalf and it was delivered earlier than the actual date promised wthich is good, but when I unpacked it Lightning connector is missing and I'm unable to use the phone.
Please can any one let me know what shuold I need to do further in order to get Lightning connector to my I phone.

You'll need to contact the retailer you purchased from and ask them.

Similar Messages

  • HU traceability is missing when HU unpacked(Transaction LM22).

    Hi SAP Gurus,
    I have a requirement to know details of Handling unit  like HU unpacked, material, batch ,qty when unpack using LM22 and packing using LM19.
    Firstly, Warehouse Operators will use only LM22 and LM19 transactions for Unpacking/Packing of Handling units.
    When I unpack Qty the Qty unpacked is moving to Partner SLOC for HU SLOC and material Document is created.
    Hence identify for HU is loosing(No traceability).
    When I pack the qty and I am not able to find  Identify for HU from which Hu the qty is unpacked from.
    hich iAs per client requirement..need to find an Original Handling unit from New handling unit is created  and send the same information  to Legacy system.
    Your inputs like Userexits, BADI'S in through which i can establish HU traceability using Mobile transactions LM22,LM19 is most helpful.
    Thanks in advance.

    Hi Hari Challa!
    Thaks a lot for your help, but I need to use this transaction becouse I am working with a warehouse that is management with RF system and in this case they need to use this transaction.
    I Know how to unpack in an Outbound delivery, and Inbound delivery and using the HU02 transaction. But I need this one.
    Thanks a lot!
    Does any one know any think about this transaction? LM22?

  • SVG connector lines missing when opened in Illustrator CS5

    It has taken a while to jiggle SVG files saved in Inkscape and get them to open in Illustrator CS5. The files are basically a flow chart with some text and connecting lines between the rectangular boxes.
    Now we are getting  text and rectangular boxes to show when the SVG file is opened in Illustrator.  However, the paths (or connector lines) that show the flow between boxes are not shown.
    The file we are opening has about 10 layers and initially, it looked like just a blank document.  We had to click the top layer in the layer group "on", to see all the layers.  I guess the default is having the top layer "off".
    When opened in a browser, the  connector lines are showing up fine (although the arrow heads are turned sideways).
    Suggestions for getting connector lines to show up in Illustrator?
    Thanks!

    I suppose Inkscapes equivalent of AI's Expand function would be advisable. I'd have to revisit inkscape one of these days, but I believe they are using styles to descripe the conenctors, not genuine objects, hence nothing shows up in programs that don't understand the Inkscape lingo...
    Mylenium

  • Random photos missing when I sync iPhone to MacBook Pro

    I have had this issue for at least the last few months: when I sync my iPhone 5 with my MacBook Pro in order to import all the photos I have recently taken on my phone into iPhoto, only a portion of the photos I have recently taken are available to import.
    Right now I have 160 new photos on my camera roll. When I plugged it in 20 mins ago, iPhoto offers me to 'import 45 photos'. I unplugged it and plugged it in again. Now it's only asking if I want to import 21 photos. I've tried turning it off and on again.
    All photos appear in my photo stream, but only a portion will import as a new event. It's very boring because I don't want to have to go through photo stream to find my photos, I'd much prefer them to come through as events that I can now sort.
    I am using iPhoto version 9.6, and my iPhone 5 is on version 8.1.3
    I cannot find a solution to this on the internet, I'm really hoping someone out there can help!

    The first test indicates that the original library is the culprit and needs to be repaired. Do the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
    2 - run Option #4, Rebuild Database.
    Redo the second test and see if you can upload all photos to a folder on then Desktop first.  If that's successful you can import them into the library.  iPhoto should detect any duplicates
    and prevent their import.

  • HT4061 error 17 keeps appearing when restoring. my iphone 5s is stuck.

    My iphone is stuck on itunes and apple logo. When trying to restore error 17 appears and stops.

    Hello jraff21,
    I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support
    You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
    The iPhone [device name] could not be restored. An unknown error occurred (4005).
    The iPhone [device name] could not be restored. An unknown error occurred (4013).
    The iPhone [device name] could not be restored. An unknown error occurred (4014).
    Try these steps to resolve the issue:
    Install the latest version of iTunes.
    Restart your computer.
    Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
    Restore using another USB cable.
    Learn more about updating OS X.
    Learn more about updating Windows.
    Restore your device on another computer.
    If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
    Learn more about other update and restore errors.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Error message "libobjc.i386.A.dll missing" when syncing both iPhone and iPad. I have uninstalled and then reinstalled iTunes and the problem remains.

    Error message "libobjc.i386.A.dll missing." After reviewing similar problems from others users, I uninstalled and then reinstalled iTunes and the problem continues. Any suggestions how to fix the issue?

    Well, more testing and I'm up against another wall.  Sorry folks, no silver bullet.

  • Contact missing when sync to Iphone

    I added one new contact in my Address Book (OS LION) and edited another one. Neither transferred to my IPHONE 4S (OS) after SYNC.. Restored IPHONE etc. No success.

    You aren't talking to Apple service here. This is a user-to-user help forum. There are only users here.
    To find out how to contact support go to: http://www.apple.com/support/contact/

  • I have difficulty charging my iphone 5. The nearest service center said that there are missing pins in my lightning connector.

    My phone is still under warranty but the service center said that it is voided due to the missing pins inside the lightning connector.  What do i do with this? My phone can charge but you need to press on the cord a little for it to click.  My cord is not the issue because I just bought it and it is brand new.

    Well, your service is handled by an Authorized Apple Service Center. If they refuse to handle the claim, that is well within their rights. Apple as well could void a claim under the same circumstances. I'm not saying that you did or did not modify the device, but you could try and talk to a supervisor there and make another request. You can also try and contact Apple by obtaining a number with this support document and describe your problem. http://support.apple.com/kb/HE57

  • A gold connector is missing on lightning charger cable. Is it still safe to use?

    One of the little gold connectors on the lightning charging cable is missing. Is it still safe to use?

    If a connector is missing then the cable is damaged and will no longer work as expected or at all. Get a new cable.

  • HT4101 Purchased new lightning connector camera kit for new mini I pad. When connecting sad card? Nothing happens unable to import any photographs ? Have already tried re booting , connecting and disconnecting card reader but nothing?

    Brand new I pad mini doesn't recognize sad camera accessory in lightning connector trying to upload photos from sad card but when connected? Nothing happens? Have already done the basics? Reboot, unplug and reconnect. Nothing? Help needed.

    All photos in DCIM folder but still no imports photo option ? When connecting card and apple accessory !
    I have older I pad 3! and older type adaptor works fine !

  • IPhone 5 won't charge when plugged into lightning connector one way but if it flips then it works

    My iPhone 5 won't charge when it's plugged into the lightning connector one way but if I flip it then it works. It's not my charger because it's the same way with other chargers. What's wrong with my phone?

    Yes I've tried multiple ones and none work. My boyfriend's iPhone 5 and my brother's all work either way the charger is turned.

  • Will Apple make a 30-pin to lightning connector that will work with a case?

    Why did Apple make the 30-pin to lightning connector useless when you have a case on your iPhone 5/5s? The lightning connector part isn't long enough to fit inside when using Apple's own cases (i.e. the new leather cases for the 5s). Does anyone know if there are plans to correct this mistake and lengthen the connector?

    From the reviews on Apple's site, the cabled adaptor does NOT work with Apple's own case - the lightning plug is too fat :-(

  • Lightning connector problem

    I picked up my iPhone 5 yesterday and after getting it home and starting the long task of tranfering my thousands of songs onto the device, I noticed that there seems to a problem witht the Lightning connector. Most times when inserting the connector into the phone, there is no connection ie. no pluged in tone and unable to sync. I have found that by placing a slight downward pressure to the plug I can get it to start syncing, then after releasing the pressure it disconnects itself. I repeat, that this happens most, but not all of the time. Is anyone else noticing this or maybe I just need to try a new cable (which are not available in the HK apple store)
    Cheers
    Rhys

    I have gone through about 3 lightning connector cables over the last year.  They initially work, but later they go bad. 
    They start having the same symptoms described above where the cable will sometimes charge if you reverse it or press down on the cable.  Over time, they just stop working.  When connected via USB to my computer, I started getting an error message indicating that the device was not working properly and the computer stopped recognizing the device as an iPhone.
    Replacing the cable fixed the problem, but I'm wondering if there is a way to get the non-functional cables to work again or maintain them so they last longer.
    One thing I noticed is that over time the center gold connection wire turns black in color, as if it was burnt as the phone was charging.  I tried using an eraser to get the black stuff off to no avail.  I will try a Q-tip with alcohol next.  Wish there was a documented quick fix or maintenance plan for keeping the cables functional.

  • Ipad mini lightning connector- replacement under warranty?

    my lightning connector suddenly heated up and later i discover it wasnt charging my ipad mini already.
    When i looked on the lightning connector tip, it is slightly bent
    COuld i ask for a replacement for this one, my warranty is still valid.

    All accessories are covered within the warranty of the device
    as long there is not physical damage to the cable itself
    Book an Apple Retail Store appointment and they'll be able to exchange the cable for you
    > only if your device is still within its warranty period

  • Lightning Connector won't dock with 32 g Touch

    5th Gen Ipod Touch, never dropped. Lightning connector won't dock with Ipod. I tried three different cables.

    What do you mean by "won't dock"?
    Maybe:
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

Maybe you are looking for