HT4095 I have been gradually purchasing TV episodes on iTunes reducing the overall cost to complete it. On the eve of the cost reduced to $0.14-15 to complete the series the price for the total series went back up to full price.

I was wondering if something flipped in iTunes code where it just would not allow a episode under the normal price which read back into the complete price of the season. I have quite a few episodes left but I want to wait until this issue was resolved to continue and not pay the full price for each subsequent episode when the rest of the season should cost under a quarter.

I was wondering if something flipped in iTunes code where it just would not allow a episode under the normal price which read back into the complete price of the season. I have quite a few episodes left but I want to wait until this issue was resolved to continue and not pay the full price for each subsequent episode when the rest of the season should cost under a quarter.

Similar Messages

  • HT1491 If I purchase one song from an albumn in iTunes, but later want to purchase the entire albumn, does iTunes give credit for the single song purchased, or will I be charged once for the single song, and then the regular full price for the albumn?

    If I purchase one song from an albumn in iTunes, but later want to purchase the entire albumn, does iTunes give credit for the single song purchased, or will I be charged once for the single song, and then the regular full price for the albumn?

    Welcome to the Apple Support Communities
    You'll purchase the rest of the album, so you'll pay the same as the cost of the album but without the cost of the previously purchased song

  • I got logic pro and i was wondering if possible paying a little less for an upgrade!! or do i have to pay the full price for the pro x?!!!

    I got logic pro and i was wondering if possible paying a little less for an upgrade!! or do i have to pay the full price for the pro x?!!!
    Or if apple would work around this some way or another?

    If you bought Logic 9 less than a month ago then Apple will most likely refund you so that you can buy Logic X instead.
    The full (only) price of Logic X is as staed on the App Store. This price (whether people agree or disagree, like it or not like it) is still less than any upgrade price for any other DAW.
    A lot of people here are saying they bought Logic 9 6 months or a year ago and want a cheaper price. For me, I started on Logic 5.5. Logic 6, you could pay an upgrade price that was way over what the full app is now but you had to add costs as things like Space Designer were extra. Their serial numbers, once purchased, got added to you XS Key, which was a dongle that never got hacked in 6 and a half years.
    Apple, on acquiring Emagic, dropped the price from $1000 to $499, included all the things you had to pay extra for then dropped the price to what it is now once they went over to the App Store. They also dropped the un-cracked dongle.
    So myself and a lot of other people here went 5.5 to 6 (added the goodies that were extra) to 7 to 8 and to 9. When there was an upgrade price, the price was around what the app is now.
    I'm amazed at how many people see this as a full price and want money off whereas in reality a complete piece of softwaser is being offered for an upgrade price.
    My first paragraph will answer your question and you probably won't care about the rest of the post. $199 or £139 IS an upgrade price.

  • Error msg: ZFI999:Maintain price for the material 254600254 in plant 1000

    Hi gurus
    18.02.2009 i created one STO PO. but material price in the accounting view the price was "Zero" in plant 1000. In plant 2000 the price has already maintained.
    But today i updated the material price like Rs 200/- through MR21 for plant 1000.
    After that while i transport the material through MB1B (351 mvt type) plant 1000 to 2000, i got the following error msg.
    "ZFI999:Maintain price for the material 254600254 in plant 1000".
    Regards
    Amsi

    Hi Amsi
    the message no is not standard i think there has been a new message created. please check with your ABAPer about the message.
    just want some clarification. you are doing STO from plant 1000 to 2000. the price should be picked for that material maintained in plant 2000.
    in case of queries please revert back
    Adwait Bachuwar

  • Val.Price for the requisition on the sales order

    Hi,
    I am creating automatically purchase requisition on the sales order with NLAG material type.
    My problem is system asking Val.Price for the requisition on the sales order. I don't want the this screen when sales order create.
    My Purchase Req. Doc Type = NB
    Field Selection key = NBB for the NB
    NBB Field Label >> Quantity and Price >> Price and price unit = Optional Entry
    Thank you
    Gulay Celik

    Hi Gulay,
    The error is coming because you have not maintained Accouting view of this material for teh plant, from where you want to procure/ship the material.
    Or even after you have maintained the Accouting view, Material price (Moving avegare price when price control is V must be Zero)
    Kindly check the master data records.
    This will resolve your issue.
    Regards,
    Dnyandeo H. Ainarkar

  • HT4436 I have now downloaded all of my CD's to my itunes library and have since only purchased new music using itunes Store.  This itunes library is stored on an old Dell Desktop that I am getting ready to replace with an iMac; how can I move the music? 8

    I have now downloaded all of my CD's to my itunes library and have since only purchased new music using itunes Store.  This itunes library is stored on an old Dell Desktop that I am getting ready to replace with an iMac; how can I move the music? 86GB
    Is the music I downloaded from my CD's already in the iCloud or only the music I purchased on itunes?

    This might help: http://www.macworld.com/article/1146958/move_itunes_windows_mac.html.

  • Hello everyone, I have a problem when I sync my apple device. I plug it in and a message comes up saying, this device could not be synced because this computer is not authorized for the purchased items on this phone. I already tried to authorize again.

    Hello everyone, I have a problem when I sync my apple device. I plug it in and a message comes up saying, this device could not be synced because this computer is not authorized for the purchased items on this phone. I already tried to authorize again, after deautherizing it. HELP ME PLEASE

    Hi applerinneedforhelp,
    Thanks for visiting Apple Support Communities.
    If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    Jeremy

  • Enter the price for the service item

    Dear Experts,
    We are implementing SRM 7.0 and we have upgraded our system with Service pack 7.Created a limit SC and approved at all levels. After approving SC system created PO in SRM but did not replicate to backend ECC system. When I looked PO in edit PO mode and system throws an error message "Enter the price for the service item".
    Have any body faced this issue? If yes please guide me how to fix this issue or Suggest me any useful link or OSS messages.
    Thanks in advance.
    Thanks
    Umakanth

    Hello,
    I assume you are using a Product category configured for Extended Classic scenario.
    In this case a limit item in SC creates limit item in PO(in SRM). But when this PO is replicated to R/3, it always creates item with type 'D' for limit item in PO.
    Now with respect to error message you get, can you check if you have specified all LImits (Overall value, Expected value etc)?
    You can also try creating a PO directly in SRM with limit item (use same Product category as above) and see if it replicates.
    If you get the same error, please raise a OSS message for SAP.
    Thanks,
    Sushil

  • I have CDs, legally purchased and uploaded to iTunes (v9.1.0.79)...they were on a harddrive and now I tried to play on my new computer (iTunes v11.0.2.26), but whilst the files appear intact they skip through each song in seconds...why?  and how to fix?

    I have CDs, legally purchased and uploaded to iTunes (v9.1.0.79)...they were on a harddrive and now I tried to play on my new computer (iTunes v11.0.2.26), but whilst the files appear intact they skip through each song in seconds...why?  and how to fix?

    I don't recognise the symptoms as such, but here are a couple of things to try.
    Check all tracks
    Unchecked tracks are skipped during normal track to track playback. Go to the Songs view and CTRL-click on an empty checkbox, or CTRL-click on a filled one twice. This will ensure all tracks are checked.
    Repair permissions
    To make sure that your iTunes folder (or media folder if located separately) has the correct permissions, right-click on the folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but later versions of Windows shouldn't be too different.
    You can also clear the Read-Only flag for the entire library from the Properties dialog.
    tt2

  • BAPI_PO_CHANGE to update the Price for the line item not updating the Price

    Hi,
    I am using BAPI_PO_CHANGE to update the Price for the line item. This BAPI is not updating the Price. I am using external cummit also, but the BAPI is not updating price.
    I am passing following data to the BAPI.
    Plant: CQ11
    PO                   Material                Price
    4500002142     TEST_BATCH     12
    Please provide suggestion.
    Regards,
    Jubin.

    Hi,
    check this link...this has sample code
    [http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm]
    Regards,
    Surinder

  • Material Ledger  - release actual price as the standard price for the next-

    Hi Gurus, Sap Library /documentation about Material Ledger says:
    "At the end of the period, an actual price is calculated for each material based on the actual costs of the period. This actual price is called the periodic unit price and can be used to revaluate the inventory for the period to be closed. In addition, you can use this actual price as the standard price for the next period."
    How Can I do that?  i've calculated the new actual price but i could release it as a new standar costo.
    Kind Regards
    André

    Hi Both,
    I think there is something else to add to this, the new PUP price can only be applicable in the period N+2 where N=Period of closing. This is something that is not specifically mentions in SAP documents.(not that I know of ) but I found it the hard way!
    Cheers

  • Material has more than one plant, only show the price for the first on

    Hi:
    I am having the standard price for the material with the different plants ,I am seeing only one Material and Standard price(if a material has more than one plant, only show the price for the first one In the report ):
    plant :de87 Material: 60020601 Standard price: 1237.00
    plant:PT01 Material :60020601 Standard price: 634.00
    In the report I am seeing DE87 with the standard price :1237.00 .
    I am extracting from the 0MATERIAL_ATTR
    Please help me how can I display all plants with the material and std price. In my data source there is no PLANT
    rgrds
    Kumar

    Hi:
    Report is running on 0MATERIAL(Transactional master data),Data sourc: 0MATERIAL_ATTR,
    We are having the standard price in the 0MATERIAL ,(Standard price is combination of plant and Material) .Plant is not available in the material,so in the report its displaying only first result
    plant :de87 Material: 60020601 Standard price: 1237.00 --->Displaying this
    plant:PT01 Material :60020601 Standard price: 634.00
    In the above we are having the same material but different plant and different standard price. so I need to display the both in the report.
    Rgrds
    kumar

  • Where to Configure the Price for the UoM Conversion

    Hi All,
    I have a requirment from my client here that he wants to change the UoM of the material at the billin document level. The UoM can be changed but I realized once it is changed the price has gone all wrong. Where can I configure the price for the UoM conversion because I cannot find it anywhere in SD itself.
    Appreciate all of your inputs.
    Thanks a lot!

    Hi Prashant,
    I am trying to maintain the same material with different UoM but when I do so it says that the current condition is being processed at the current session. I guessed it meant that the conditiont record for that material type already exists?
    How do I rectify this problem because when I enter the new line of material with the new UoM disappears.
    Appreciate your input in this,
    Thanks a lot!
    Edited by: Yvonne Lee Sook Fun on Jun 16, 2009 4:32 AM

  • HT1390 Why do I get a different movie price for the same movie on my iPad and iPhone. And 1 device says I can rent it but the other doesn't ,.?

    Why do I get a different movie price for the same movie on my iPad and iPhone. And 1 device says I can rent it but the other doesn't ,.?

    Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
    http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
    and here:
    http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
    Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
    http://support.apple.com/kb/TS2296

  • CProject, task based costing, strat. 10, plan price for the role in ctr acc

    Hello all.
    According to the costing logic described in R/3 library the following strategies are available for costs when using task based controlling. 
    Costs for task
    4.      Different costs which you entered for the task
    5.      Costs per activity unit for the task in Customizing
    Costs for roles
    8.      Different costs which you entered for the project role
    9.      Costs per activity unit for the role in Customizing
    10.      Plan price for the role in cost center accounting
    Do anyone have experience with using strategy 10?  If so, please elaborate. 
    Thanks for your help / Anders

    Hi Sejo,
    Thanks for your reply, Standalone cProjects works, but obviuosly it has to be integrated with ECC and configuration related to accounting in ERP has to be done.
    Scenario is that I have created a Project and before transferring it to ECC(creation of internal order) I should be able to calculate the cost from cProjects, as these are just rough cost based on cost/revenue rate.Later when I calculate cost using internal order from ECC it should overwite.
    Additionally as per the link I have already done the required configuration.
    1.     Activate Integration
    2.     Define Object Links for Accounting Integration
            Default entry: 0FIN_INT_SOC_R3
             defined RFC destination . Is webserver to be defined - required ?
    3.     Make General Settings
    4.     Define Cost/Revenue Rates
            Cost revenue rates are defined here.
            I havent maintained Organisation unit as it takes default 'zero'.
    5.     Replicate Cost/Revenue Rates
            To replicate cost revenue rates from Cprojects to ERP.
    6.     Replicate Accounting-Relevant Characteristics
    7.     Make Settings in ERP System
            Make settings in ERP system related to controlling
            Create and Change Controlling Scenario
            Define Controlling Scenario
            Settings for Easy Cost Planning
    Assign Cost Elements and Activity Types > Activity type must be open for period and must have proper cost element. (can be maintained in tcode: KP26).
    Then also for Task based costing is not calculating and for role based it is showing Negative.
    Please guide me where it is going wrong.Is it related to Organisational Mapping?
    Regards,
    Nitin Ghadge

Maybe you are looking for

  • Pages doesn't open (iCloud) documents

    Pages on my iMac doesn't open my documents stored in iCloud. However, I can drag documents from iCloud to my desktop, then open them with Pages and save them in iCloud. Then I can't open them again.. My Macbook Air doesn't have any problems, it just

  • Right-click Google search - put in new tab or window??

    Safari has a feature that allows one to right-click on some text and then Google that text. When using that feature, it Googles the text, but the new webpage of the Google search for that text appears in the same browser window that one was originall

  • Disk almost full

    How do I fix this? I have this message that keeps popping up that says, "Start up disk almost full." I have reset my cache in safari, deleted as many photos as I could, but it still says the same thing. What should I do? Thanks so much! Also, I looke

  • Table Name which stores Vendor e-mail id

    Hi Team,   Please let me know in which table the e-mail ids of vendors would be stored. I have gon ethrough the t.code XKO3.iN E-MAIL id field it is directing to structure and field <b>SZA1_D0100-SMTP_ADDR</b>. Regards Badari Talanki

  • Difference between workbench request and customizing request in transport

    Hi Experts, I am new to SAP BI7 work. i am having basic doubt in Transort request creations ususally we create  the requests to transport the objects from Development  system to further systems. can anyone please clarify me,  what is the main deffere