HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?
Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?
So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.
Similar Messages
-
I have a late 2006 iMac with new Ram installed in late 2011or early2012 . I am currently running lion. Did/ hit something while half asleep and was asked for my recovery password, I didn't know it & not sure what I did after that but it wont boot up just searches with a light grey whit -ish screen. Cant get it to clear. Any advice?
Charlies Secret Angel-Try to boot in Safe mode, see if you are able: Hold down shift and then power on. For wireless keyboards, hold down shift after the chime.
Safe Boot
Resolve startup issues and perform disk maintenance with Disk -
Not sure what I did but all of a sudden everything I touch has a voice attached to it. For instance, if I touch an icon it tells me out loud what the icon is and tells me to double click it. ***??? Help!
Connect your iPhone to your computer via its USB cable and select it in the left column of iTunes.
Select the "Summary" tab, scroll to the bottom and click the "Configure Universal Access" button.
Disable "VoiceOver" and click the "OK" button.
Click the "Sync" button at the bottom-right. -
Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?
See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help. -
When I look at the storage, most of what is taking up the space is "other". I am not sure what these application or documents are but would like to reduce this so that I can store more pictures to edit. Any advice on how to find out what takes up this much space so that I can clear some off?
Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
What is "Other" and What Can I Do About It?- Apple Support Communities -
I have been reading many FAQS recent ly about this same promotion regarding the upgrade to the iphone 5c 32g and it appears so many of you have been having countless issues with it.... I feel horrible for everyone who has been dealing with this headache. Makes me wonder what i did right because i have had no problems at all, Simply called Verizon over the phone and the rep was super nice and patience and very helpful. All i had to do was call in the next day in the very early AM so they could stop the wrong phone i origanlly ordered before it wasshipped( which was thru The Edge Program) and they stopped it in time luckily before it was shipped and than the same rep canceled out the Edge option and redid everything under the new early upgrade option instead for the 5c 32 gig blue and i got it two days later with no cost whatsoever other than activation fee of 30 bucks billed to next billing cycle. Got phone and all is good from the looks. Honestly no idea what i did that worked for me but it worked. Maybe i just caught the promotion before it was immeaditatly taken off website.
Hi there,
I've just joined google for my email and like you wanted to sync my contacts and calendar.
I had a couple of problems but have ironed them out below.
First....Google have a 'google sync' program that is advertised as syncing both your contacts and calendar. This has not worked for me. I can sync my calendar no problem at all, but it hasn't worked for my contacts. On looking across the google firums I am by no means alone and indeed google employees who post there have acknowledged the problem too,
So how to get round it and sync your calendar and contacts?
For calendar go to this link
http://www.google.com/mobile/products/sync.html#p=nokia_smart
Follow the instructions and tell the Mail for Exchange program NOT to sync your contacts. Like I said, although it's supposed to I couldn't get it to work despite a reformat of the device twice! A google employee on the forums even went out and bought the 5800 and tried to get it to work as he has noted that people are having problems. Hopefully it'll be addressed in the future.
For syncing your contacts, go to this page
http://www.google.com/support/mobile/bin/answer.py?answer=98230&topic=15015
All the details for contacts sync are laid out for the pages of setup you have for a S60 3rd edition device. If, like me you have a S60 5th edition device, the details are all there but are requested in a different order. Have a good scan of the pages and you WILL find all the info you need.
Both methods work great for me and I'm delighted.
Hope this maybe helps
If my post has helped you in anyway, please press the 'kudos' button.
Thanks -
My computer asked to what I want the ipod to do. Now it only looks for videos and photos, which it does not find. I can't sync my podcasts or music to the device. Not sure how to fix it. It is an ipod touch.
Connect your iPod to the computer (and iTunes) and look on the Device/Music pane, as below:
You need to have Sync Music ticked, as shown.
If you have Entire Music Library checked, then all your music should go back onto yuor iPod.
If you have chosen Selected playlists, artists, albums and genres, you will see additional options for choosing which of those choices you want.
If you make any changes here, you may need to click on the Sync, or Apply, button to make the changes happen. -
Help i clicked something and now my big wont show up big.. its there but black.. you can see the names that are tagged but no pic.. ive tried view ect but nothing
There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
Im not sure how to get his phone to come back on. Ive never seen an iphone do this. He updated to the latest version and it came up with a plug in on the screen with an arrow pointing to an itunes app looking thing. I'm sorry if this is confusing but I'm not really sure how to explain what it looks like.
UNABLE TO RESTORE (connect to iTunes with cable logo)
If you are trying to restore and you device shows an image of a USB cable and connect to iTunes then carefully follow the steps in this article. You may need to do is several times http://support.apple.com/kb/ht1808 -
Mismatch query not working. Not sure what I did wrong.
In my query, I have created two CTE's. One pulls in the records of all people who are assigned to an audience. The other pulls in all people who are assigned to the same audience AND completed a certain course.
What I wanted to do from there, was to do a mismatch query, not to find the PEOPLE, but just the departments that were represented in the audience, but had no people in the list of those who completed the course. (In other words, say the HR Department had
three people in the audience... two completed the course, one did not. The HR Department should NOT show up in my mismatch query because some of their people completed the course. Then, say the IT Department had five people in the audience, and none of them
have completed the course. The IT Department SHOULD show up in my mismatch query. For this case, I don't care about the people who didn't complete it, just the departments where nobody did yet.)
I thought I was doing the mismatch query correctly, but I guess I must not. I will share the relevant parts of my query below (there is more to my query, but I don't think you necessarily need to see it to assist with this particular problem). (Side note:
Yes, I know the way I am doing the fiscal calendar is not ideal, but I've looked up other ways to do it, and do not understand it. Given time, I can break it down and understand it, but I am in a rush to finish this report.)
gm101certtbl
AS
select
dimUser.EmpFK MeasureEmpFK,
RIGHT(OrgCode2, LEN(OrgCode2) - 2) MeasurePC,
audusersName MeasureAudName,
dimActivity.ActivityName MeasureActName,
dimActivity.Code MeasureActCode,
CASE
WHEN OrgCode2 LIKE 'US%' then 'US'
WHEN OrgCode2 LIKE 'CA%' then 'CA' END
CountryCode,
'ACTUALS_GM101' SOURCESYSTEMID,
Null CURRENCYCODE,
'GM101CERT' MEASUREID,
Null MEASUREDOLLARS,
CASE
WHEN GETDATE() Between '20131001 00:00:00' AND '20140930 11:59:59' THEN '2014'
WHEN GETDATE() Between '20141001 00:00:00' AND '20150930 11:59:59' THEN '2015'
WHEN GETDATE() Between '20151001 00:00:00' AND '20160930 11:59:59' THEN '2016'
WHEN GETDATE() Between '20161001 00:00:00' AND '20170930 11:59:59' THEN '2017' END
FiscalYear,
CASE
WHEN MONTH(GETDATE()) = '10' THEN '1'
WHEN MONTH(GETDATE()) = '11' THEN '2'
WHEN MONTH(GETDATE()) = '12' THEN '3'
WHEN MONTH(GETDATE()) = '1' THEN '4'
WHEN MONTH(GETDATE()) = '2' THEN '5'
WHEN MONTH(GETDATE()) = '3' THEN '6'
WHEN MONTH(GETDATE()) = '4' THEN '7'
WHEN MONTH(GETDATE()) = '5' THEN '8'
WHEN MONTH(GETDATE()) = '6' THEN '9'
WHEN MONTH(GETDATE()) = '7' THEN '10'
WHEN MONTH(GETDATE()) = '8' THEN '11'
WHEN MONTH(GETDATE()) = '9' THEN '12' END
FiscalMonthNbr
from
dimUser INNER JOIN
audusers ON audusers.DataSetUsers_EmpFK = dimUser.EmpFK INNER JOIN
Org ON dimUser.PrimaryDomFK = Org.Org_PK INNER JOIN
factUserRequiredActivity ON factUserRequiredActivity.UserID = dimUser.ID INNER JOIN
dimActivity ON dimActivity.ID = factUserRequiredActivity.ActivityID INNER JOIN
dimRequirementStatus ON factUserRequiredActivity.ReqStatusID = dimRequirementStatus.ID LEFT OUTER JOIN
UsrOrgs ON dimUser.ID = UsrOrgs.UserID LEFT OUTER JOIN
UsrDoms ON dimUser.ID = UsrDoms.UserID
WHERE
dimActivity.ActivityName = 'GM101 Program Completion'
AND
dimRequirementStatus.name = 'Satisfied'
AND
(audusersName = @audparam)
gm101availtbl
AS
select
dimUser.EmpFK MeasureEmpFK,
RIGHT(OrgCode2, LEN(OrgCode2) - 2) MeasurePC,
audusersName MeasureAudName,
Null MeasureActName,
Null MeasureActCode,
CASE
WHEN OrgCode2 LIKE 'US%' then 'US'
WHEN OrgCode2 LIKE 'CA%' then 'CA' END
CountryCode,
'ACTUALS_GM101' SOURCESYSTEMID,
Null CURRENCYCODE,
'GM101AVAIL' MEASUREID,
Null MEASUREDOLLARS,
CASE
WHEN GETDATE() Between '20131001 00:00:00' AND '20140930 11:59:59' THEN '2014'
WHEN GETDATE() Between '20141001 00:00:00' AND '20150930 11:59:59' THEN '2015'
WHEN GETDATE() Between '20151001 00:00:00' AND '20160930 11:59:59' THEN '2016'
WHEN GETDATE() Between '20161001 00:00:00' AND '20170930 11:59:59' THEN '2017' END
FiscalYear,
CASE
WHEN MONTH(GETDATE()) = '10' THEN '1'
WHEN MONTH(GETDATE()) = '11' THEN '2'
WHEN MONTH(GETDATE()) = '12' THEN '3'
WHEN MONTH(GETDATE()) = '1' THEN '4'
WHEN MONTH(GETDATE()) = '2' THEN '5'
WHEN MONTH(GETDATE()) = '3' THEN '6'
WHEN MONTH(GETDATE()) = '4' THEN '7'
WHEN MONTH(GETDATE()) = '5' THEN '8'
WHEN MONTH(GETDATE()) = '6' THEN '9'
WHEN MONTH(GETDATE()) = '7' THEN '10'
WHEN MONTH(GETDATE()) = '8' THEN '11'
WHEN MONTH(GETDATE()) = '9' THEN '12' END
FiscalMonthNbr
from
dimUser INNER JOIN
audusers ON audusers.DataSetUsers_EmpFK = dimUser.EmpFK INNER JOIN
Org ON dimUser.PrimaryDomFK = Org.Org_PK LEFT OUTER JOIN
UsrOrgs ON dimUser.ID = UsrOrgs.UserID LEFT OUTER JOIN
UsrDoms ON dimUser.ID = UsrDoms.UserID
WHERE
audusersName = @audparam
missingPC
AS
select distinct
NULL MeasureEmpFK,
gm101availtbl.MeasurePC,
gm101availtbl.MeasureAudName,
gm101availtbl.MeasureActName,
gm101availtbl.MeasureActCode,
gm101availtbl.CountryCode,
gm101availtbl.SOURCESYSTEMID,
gm101availtbl.CURRENCYCODE,
'GM101CERT' MEASUREID,
gm101availtbl.MEASUREDOLLARS,
gm101availtbl.FiscalYear,
gm101availtbl.FiscalMonthNbr
from
gm101availtbl LEFT OUTER JOIN
gm101certtbl on gm101certtbl.MeasurePC = gm101availtbl.MeasurePC
WHERE gm101certtbl.MeasurePC IS NULL
If anybody can help, I would greatly appreciate it. I'm trying to do this so I can pull these records into a final table to count the records from the other two, but then include these as a 0 count where these departments have nobody certified.
To test if this was working, I created a query using this Mismatch query instead as the main query. Instead, it seemed to give me the exact opposite. It seemed to be giving me all of the Departments (MeasurePC) where the records were represented.Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums. We have no sample data, so we cannot even guess.
>> In my query, I have created two CTE's. One pulls in the records [sic] of all people who are assigned to an audience. The other pulls in all people who are assigned to the same audience AND completed a certain course. <<
Please, please learn the basic terms. Rows are not records. And THEN learn what “redundancy” means so you will not write two CTEs in the future.
>> What I wanted to do from there, was to do a mismatch query, not to find the PEOPLE, but just the departments that were represented in the audience, but had no people in the list of those who completed the course. (In other words, say the HR Department
had three people in the audience... two completed the course, one did not. The HR Department should NOT show up in my mismatch query because some of their people completed the course. THEN, say the IT Department had five people in the audience, and none of
them have completed the course. The IT Department SHOULD show up in my mismatch query. For this case, I don't care about the people who didn't complete it, just the departments where nobody did yet.) <<
This is a Relational Division. It is one of Dr. Codd's original 8 operations.
We do not use the Sybase CURRENT_TIMESTAMP any more. We have DATE data types tody, rtoo. We never tibble in good code; it is a design flaw that used meta-data affixes like “tbl” in schema object _names, PK in column _names, etc. We do not have repeated groups
like “org_code_2”; we do not use arrays in RDBMS. Why is your data so screwed up you have use
CASE
WHEN org_code2 LIKE 'US%' THEN 'US'
WHEN org_code2 LIKE 'CA%' THEN 'CA' END
to clean it up in a query; the DDL should have prevented this problem.
Why are you doing calendar computing in your query? Where is the Calendar table?
“Users.id = UsrOrgs.user_id” says that you have magic, generic “id” that can change its name from table to table. Likewise, a generic, magic “code”, etc. What might be even worse is that totally different data elements have the same name! “Automobiles, squids
and Lady Gaga” programming is not RDBMS.
You have never heard of ISO-11179 and data modeling?
Here is a skeleton for fiscal calendar table to replace your current row by row temporal math:
CREATE TABLE Calendar
(cal_date DATE NOT NULL PRIMARY KEY,
fiscal_month CHAR(10) NOT NULL,
INSERT INTO Calendar
VALUES
('2014-10-01', '2015-01-00', ..),
('2014-09-30', '2015-12-00', ..),
You can use a spread sheet and a text edit to fill in the table for 50 or 100 years.
I like the MySQL convention of using double zeroes for months and years, That is 'yyyy-mm-00' for a month within a year and 'yyyy-00-00' for the whole year. The advantages are that it will sort with the ISO-8601 data format required by Standard SQL and it is
language independent. The pattern for validation is '[12][0-9][0-9][0-9]-00-00' and '[12][0-9][0-9][0-9]-[01][0-9]-00'
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
Not sure what I did, I need to find previous info on partitioned drive
I had 2 external hard drives. I had the smaller one full, but I had just recently purchased a TB, I have both plugged into my Imac. I had some photos and so forth on my TB drive from my other PC. I plugged it and did a partition. I was told at the store I purchased my apple from that I did not have to remove anything from it.
Well the question is, How do I find the information on the Hard drive now. I click on it and it only shows backed up information. Or did I really mess up things bad and delete them when I partitioned it. I am very new to apple and am learning slowly. This has me stumped and cant figure out what I did. I look back on time machine and believe that time machine was activated after drive was partitioned. Does apple have a number to call for support? Just for future reference,
Thanks for info you help with.
JaniceHi Janice
If you partitioned it correctly the 10.5 Disk Utility will save the existing data on the first partition and only the first partition, anything else and all the existing data will be erased.
Question, when the External HD is mounted do you see two icons on the Desktop, in Finder and Disk Utility?
Dennis -
3rd generation iPod touch with iOS 5.1.1. This is now my daughter's iPod and apparently it had been set up to automatically sync new purchases, but the iTunes store and Match were turned off, so when I removed restrictions tonight to update some apps and reconfigure some stuff, a bunch of albums purchased in the last few months tried to syncrhonize to the device. Somehow I eneded up removing the download option yet the album titles and songs appear in the music app. How can I remove these "files"? According to iTunes, they aren't on the device. They do not play. There are no pending downloads in iTunes store.
I am hopeful there is a solution short of restoring the device. Since it's my daughter's iPod now (handed down) and she has her games with progress saved, any restore will erase her progress.
Thanks in advance.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music (This delete all may not be applicale to iOS 5)
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
How do I get my iTunes back? I am new to iPad and hit something wrong.
The default apps cannot be removed.
Check all homescreens and folders to ensure it has not been moved.
Check Settings > General > Restrictions to ensure that the iTunes store has not been restricted.
If neither of those resolves, select Settings > General > Reset > Reset Home Screen Layout. -
I bought a new computer and did not have this problem with the old one. Anytime I minimized any page I was viewing, it would put a little box down at the bottom on the line with the start and other buttons but on the right size of the screen. I could just click on it and it would open it right back up. Now if I try to close something to maybe work on it later, it closes it out.
How is that related to Firefox? <br />
Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail".
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39] -
Not sure what I did or how to correct this...
My iMac is taking a screen pic of every website I go to. These pics are now showing up on a slideshow on my apple tv . Has anyone had this problem?
Try using a browser other than Safari, like Firefox.
In Sharing, what all do you have enabled?
Maybe you are looking for
-
Excel Pivot (molap) will not refresh from an SSAS box that is not part of the Farm
I have spent hours trying to get this working going through many links. One of the best ones is this. http://whitepages.unlimitedviz.com/2010/12/connecting-to-cubes-and-external-data-with-excel-in-sharepoint/ However even after doing all of this it
-
Sending Idocs from SAP-R/3 to XI, bundle and map them to one XML-file
Hi All, We need to send IDoc's (DEBMAS06) from R/3 to XI and bundle and map them to a single xml-file. Please help us with your suggestions on how to proceed using a simple solution (probably need of BPM). Regards, Theo
-
External Storage units to be entered in the Creation of Transfer Order
Hi Experts, We have a scenerio where the business creates the Storage units in advance, creates the PO and assigns ithe SU's to the Purchase Order in the custom table. Then creates the Goods reciept using a BAPI which creates a Transfer requirement.
-
Wont open my photoshop cc app, why ?
I am downloading the Photoshop CC but then it wont let me open it. also i got a brand new Mac book air for x mas and i dont understand why it wont work on my new laptop. can anyone help me?
-
Modify INITIAL in partitioned table
Dear all, Facts: oracle 10.1 aix 5.3 i have a table with the INITIAL value 1M: partition PARTITION_83 values less than (201103) tablespace D_DML pctfree 0 pctused 40 initrans 1 maxtrans 255 storage initial 1M minextents 1 maxextents unlimited and i w