HT4314 I have just got a new ipod touch but my game centre games are on the old one and i don't want to start them again, can I transfer the stage i'm at or anything?
I have just got a new ipod touch but my game centre games are on the old one and i don't want to start them again, can I transfer the stage i'm at or anything?
The progress for some games will transfer since some games synce progress to a cental server. For other games you will have to have the backup of the old iPod.
You can restore from backup or access the backup. See:
How to transfer game saves between iOS devices, without iTunes, and without jailbreaking | TUAW - The Unofficial Apple Weblog
If you have acces to the old iPod yu can make a backup by connecting the iPod to the computer and right click on the iPOd under Devices in iTunes and select Back Up. Then restore from that backup.
Similar Messages
-
i have just got a new ipod and wenever i try and make an in app purchase it says contact itunes store . wat do i need to do ??please hlp
Contaact iTunes like the message says:
Apple - Support - iTunes - Contact Us -
Just got a new iPod touch...turned it on and it automatically told us to plug it into iTunes...it never asked me for my password to connect to my network...Help!!
This one is really simple.
Just make sure that the "only sync checked songs" box is checked under the music tab. Then select the songs that you want synced. Once you then click "sync", it will remove any of the songs that were automatically put there and add or leave only the ones that you put check boxes next to.
Have fun! -
I just got a new ipod touch 4g yesterday and it is stuck on apple logo and loading screen
i just got a new ipod touch yesterday. i was uploading it today. when i was downloading the new software 5.1 it does the same thing it did to my old one which was a ipod touch 4g also. it goes to the apple logo then the loading screen then it turns white, then it does it all over again. i have done everything and and really getting annoyed. could it be the software? please someone help me.!
- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to computer and try to restore via iTunes.
- If the iPod continues to cycle like you describe, let the battery fully drain. It may take a while. After charging for an hour try the above again. -
i just got a new ipod touch 64 gb 4th generation after my old one got cracked. my mum backed up all my stuff on my laptop pc but i tried to sync everything back on to my ipod but there are non of the music files there + the pictures wont download
itunes content is not part of the backup as it should all be in itunes on your computer.
What pics won't download?
Please explain your issue. -
I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need advice.
What type network is yu router set up for? The 4G iPod can only connect and see 2.4 GHZ networl like B, G and the 2,4 GHz N. There is also a 5 GHz N but the iPod will not even seethat network.
See:
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Recommended settings for Wi-Fi routers and access points -
2 of my movies are no longer working in my iTunes or on my iPod Touch, One doesn't play at all and the other gets to about 29:00 than stops working and I don't want to buy them again. Then also when I added a non-iTunes movie and tried to have iTunes make an iPod/IPhone version it gave me error -4. What's happening to my movies?
I also have to add that the right earbud only doesn't work on my phone while i'm listening to music. If I'm face timing it's okay. what the heck.
-
I have just bought a new 32gb ipod touch I have been through the set up.
When connecting to my apple library on my computer it will let me put apps on to the new touch
but not any music or videos. can anyone help?What happens when you try to sync the music and videos to the iPod?
Was all media purchased wit the same Apple ID?
Did the music and videos sync to the old iPod? -
I just got a new iPod touch and I need the latest version of iTunes
to sync and manage it, so I used the updater and it gets all the way to the end of the installation process then comes up with an error- "your windows installer package encountered an error" and then it rerolls the process and closes. I uninstalled the version I had (version 10 of iTunes) and tried to install it after I downloaded from apple's website. but I'm still getting the same error. I'm running Windows 7 for 64 bit and everything is up to date with my system.
Repair your Apple Software Update
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you can find ASU in All Programs, go to Control Panel/Programs n Features/highlight ASU, click REPAIR -
I had an old ipod which I had downloaded songs from my pc..I bought a new Ipod touch and want to download songs onto my new ipod touch when I attach the ipod to my pc it reads "camera detected" I have a mac air as well but all my songs are on the pc. I want to download songs onto my ipod touch from the pc can any one help me?
LesThis may help you find your iTune account:
Frequently Asked Questions About Apple ID
Without knowing your old account info there is nothing you can do. -
OS is whatever OS ships with current IPOD Touch
I cannot understand why the APPLE engineers have designed this product so that it has SO MANY WIFI problems. This is supposed to be an easy-to-use product. We've had no problems connecting our new laptop, our ROKU box, etc, but it seems impossible to get the IPOD touch to work. NOTHING LIKE SPENDING XMAS MORNING DOING APPLE TECH SUPPORT TROUBLESHOOTING TO LEAVE YOU IN THE CHRISTMAS SPIRIT!!! Argh!
In fact, the only way we have been able to get this expensive brand new IPOD to work on our home network is to DISABLE SECURITY in the router settings. THIS IS ANYTHING BUT A GOOD IDEA.
DON"T KNOW WHY BUT MANY OTHER USERS ARE REPORTING THE SAME KIND OF PROBLEM SO APPLE ENGINEERING NEEDS TO GET BUSY AND FIX THIS PROBLEM SO THAT NEW USERS CAN CONNECT TO THE INTERNET WITHOUT HAVING TO BE TRAINED ROUTER ENGINEERS TO DO IT!!!!
Ok, sorry for the rant, but surely those of you who are experiencing this share my frustration. This is not why I bought an APPLE product.
IS THERE ANY POSSIBILITY THAT APPLE WILL NOT ALLOW A WIFI PASSWORD with more than one identical alphanumeric character? Any ideas? We also tried eliminating the 40 MHZ setting under Bandwidth settings in the router settings for our router, but it made no difference. The router has the latest firmware, too. Running out of ideas, and am ready to box this unit up and send it back!Thanks, Bob! You are correct. And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE). One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind. Only with the Security Mode set to DISABLED, could we gain access.
2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers. Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them! -
I just got a new iPod touch 4th generation and the latest iOS update (4.3.3) isnt installing
It says the software version is 4.2.1 amd that it's downloaded the iOS 4.3.3 version, but when I hit the update button it does the "extracting" bit and then when it gets to the "verifying update with Apple" it says
The iPod "Tanuj's iPod" could not be updated. An unknown error occured (3194)
I looked up that error and it said that that meant that my iTunes wasnt up to date. I checked, but it actually was up to date, but I re-installed the whole thing just to be sure, but it's still not updating.Yep, it say iTunes 10.3.1.55
I tried searching for 3194, and someone pointed to http://support.apple.com/kb/TS3694#error3194 and that says:
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
I'm sure I have the latest version of iTunes, but what's an updater log? -
I am trying to add another ipod device to my itunes account, but itunes does not pick up the device. I have 2 other ipods that work just fine. Only iphoto picks up the device.
What happens when you try to sync the music and videos to the iPod?
Was all media purchased wit the same Apple ID?
Did the music and videos sync to the old iPod? -
I just got a new ipod touch and I don't know how to connect it to iTunes. Help ?
I've plugged it in and everything but it won't come up , already updated iTunes and restarted computer
See:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later for iOS 6 (10.5.8 for iOS 5)
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download) for iOS 6 (10.5 for iOS 5) -
Why won't my brand-new iPod Touch connect via BlueTooth in my Volvo? My old one did!
Very interesting, but frustrating, too. The iPod shows (in Settings): Bluetooth On; devices--cell phone (not paired); MacBook (not paired). Nothing about the car. In the car, it wants me to punch in a four-digit code. HOW? Where?
This is crazy because my old iPod does this.
Anyone have a clue?The iPod will not pair with a computer. The iPod will only pair with yur car is your car supports one of the BT profiles that is supported by the iPod
iOS: Supported Bluetooth profiles
Does the manufacturer of the car system say it will work with your model iPod and its iOS?
http://wiki.answers.com/Q/How_do_you_use_bluetooth_on_ipod_touch?#slide=1
Maybe you are looking for
-
How do I redirect formula links in a duplicated table?
I am putting together an annual accounts spreadsheet in Numbers. I have several worksheets with a set of tables for the first month. The final worksheet contains a summary table which gathers data from across all the tables on the other sheets. No pr
-
Need to create a sales order that does not create demand
Hi, We need to create a no cost sales order - that does not create demand In our current set-up when we try to create a no cost sales order with a material ( It Cat = Norm) we see demand being created in MD04 What configuration settings will allow us
-
Importing templates & fonts from Microsoft Office into Pages
At Peggy's suggestion in the Appleworks discussion group, I saved templates and fonts from a Microsoft Office Test Drive, so I can install them into my newly acquired iWork Pages program. Pages is now installed, but I don't know where to put the temp
-
Hi Guys. We are in the process of using BTH add-on and Payment Engine add-on for Bank STatement Processing. While initialising the Set up in House Bank Accounts system is asking to import file name but i didnt find any file format there. Will u guys
-
Created a PDF in reader and now shows as blank after I send in an e-mail; I see other people have the same issue. Can this be rectified through the reader platform or do I need to purchase other adobe products to solve this issue?