HT4352 itunes not showing atv 1 connection

Itunes doesn't see appletv all of a sudden.  ATV 1

2 reasons why you might only have 2 tabs.
1) itunes is set to use "automatic syncing" as opposed to "custom sync"
2) you have linked itunes to the appletv as a secondary streaming only connection, thus no sync options are available.

Similar Messages

  • ITunes not showing ATV Content...can't sync...HELP!

    Just updated to Snow Leopard...linked the ATV and iTunes with the 5 digit code. It shows up under devices...but only the summary and photo tabs are available. In the summary tab (where you usually have all the info on how you want to manage syncing, etc.)...it is blank with no info/options.
    I have the most up to date software on ATV and MacBook Pro / iTunes.
    Any help would be greatly appreciated!!

    2 reasons why you might only have 2 tabs.
    1) itunes is set to use "automatic syncing" as opposed to "custom sync"
    2) you have linked itunes to the appletv as a secondary streaming only connection, thus no sync options are available.

  • ITunes not showing iPod as connected

    I have been trying to sync my iPod for several hours, but iTunes isn't showing that any devices are connected.
    I have tried every USB port on my computer, and am getting the same result. I also checked the 'My Computer' section of the computer and it does not show anything connected.
    And, if it helps, I have a Second Generation iPod Nano.
      Windows XP  

    If your computer meets all minimum system requirements, and you've done all the listed troubleshooting steps in the article, then you should go ahead and set up a dispatch for the iPod. You can do that at the following website.
    http://depot.info.apple.com/ipod/

  • Why does the iTunes not show "Photos"

    Why does the new iTunes not show "Photos" after it is synced, and why does iCloud not show Photos also?

    Ralph9430 offers a good suggestion.  But you may need to do this before taking his advice:
    Check in iPhoto's Preferences (which you can open from the iPhoto menu).  Look in General, and make sure "Connecting Camera Opens" is set to "Image Capture").
    If it is set to "iPhoto", you won't be able to get to Image Capture easily.

  • Add PDF to iTunes not showing up in print PDF pop up menu

    Add PDF to iTunes not showing up in print PDF pop up menu. I lost the print PDF to iTunes option. its no longer there. I still have web reciets and mail. also when i add in "edit menu" they don't get added.all this used to work fine

    i found the answear. go to library/PDF Services  or  ~/Library/PDF/Services and clean out this folder. you can also add scripts and automator scripts to add things

  • Wifi problem: I have a airport wifi the small one with one port for modem. My Problem is airport wifi works fine however when I power off my IMac then power it up later on It does not show a connection I then have to manual do it my self it's a pain and n

    I have a airport wifi the small one with one port for modem. My Problem is airport wifi works fine however when I power off my IMac then power it up later on It does not show a connection I then have to manual do it my self it's a pain and never happened before I have tried resetting the airport unit but still no luck please help.
    Thank you
    Roy from malden

    Hi Roy, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

  • HT201270 ITunes not Showing iPad and iPhone after IOS7 upgrade.

    ITunes not Showing iPad and iPhone after IOS7 upgrade. I have reinstalled iTuned. Repaired services...etc

    Hey Sliqueg,
    There are a few troubleshooting articles that can help resolve the issue. Check them out here:
    For Windows:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    For Mac OS X:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Sincerely,
    Delgadoh

  • Not showing ipod connection to itunes?

    Sorry i've had my ipod for about 5 months and i hadnt had this problem till about a week ago...whenever i plug my USB connection cord that came with the ipod into the computer with the ipod plugged in with it, it shows my ipod charging but doesnt show it connected to itunes, meaning it wont download any songs onto my ipod automatically because it shows that my ipod isnt plugged in when it is, if anyone can help me out that would be much appreciated! thanks!
    MA477LL   Windows XP   2GB memory version 1.1.2

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod shows up in Windows but not in iTunes
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

  • HT4235 my iphone does not show as connected on itunes menu

    suddenly my iphone will not show as a connected device in itunes even though my laptop recognzes that it is attached to my usb port
    I have synced this phone before but now it is not recognized by itunes.

    Hello wtcooper217,
    It sounds like your iPhone is not seen in iTunes but your computer does recognize it. I recommend the troubleshootings steps from the article named:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I just synced my 2 ipods but now my ipad does not show as connected when I try to sync it.  Had no problem syncing before.  Did troubleshooting but have not uninstalled itunes. Help!

    just synced my 2 ipods with no problem now trying to sync my ipad and itouch and they do not show on the screen as usual .  Help!

    You give very few details. If I stated that  .......
    "I started my Nissan today and it started fine - but my Chevrolet will not start today - but it started yesterday. Help!" - you would probably have no idea where to begin with doling out advice or troubleshooting steps. What troubleshooting did you do? Obviously not all of it - if you did not uninstall and reinstall iTunes.
    Quit iTunes, reboot your PC and then try again.
    If that does not work, you could post back with the OS that your actually running on your computer - I am assuming that you are a Windows user and I could be wrong, but without some help from you .... Well we are just beating our heads against the wall.

  • ITunes not showing songs that are on the iPod Touch

    I have an iPod Touch 4th Generation.
    I use iTunes 11.0.
    I usually connect my iPod Touch to iTunes and play songs from there because I do not put songs in my itunes library.
    I was doing this as usual and today when I connected my iPod Touch to iTunes, songs did not show up on the music tab of "On This iPod".
    Just the previous day, I opened iTunes and there were all my songs.
    Today, iTunes does not show any of my downloaded songs that were not bought from the iTunes Store.
    The iTunes Capacity Bar shows that I have songs on my iPod Touch.
    But when clicking on the iPod and going under the music tab in "On This iPod", there is no music other than a few songs, which were purchased from the iTunes Store itself.
    I also tried third party software just today to check if I can get the songs off my iPod.
    I tried using SharePod and it did not detect any songs, not even the purchased songs from iTunes.
    There are songs on the iPod Touch only. I can play all the songs from the iPod Touch just fine.
    They are simply just not showing up on iTunes.
    How do I get iTunes to show the songs on my iPod Touch? The capacity bar says there are songs.
    I tried SharePod a few times long before this happened, and it showed the songs on the iPod Touch.
    I don't understand why all of a sudden the songs all disappeared from iTunes itself only.
    (I would say this is similar to other issues where iTunes DOES show songs while the iPod itself DOES NOT. Mine is the opposite.)
    Thank you for the help in advance.
    Message was edited by: j_leongg
    I tried backing up the iPod Touch.
    Now all the songs on the iPod Touch (except for the purchased ones) are turned to blank names and are skipped.
    There is no name for each song or artwork, they all are called 'unknown'.
    Only the purchased songs are left unharmed. Everything else is corrupted now.

    SOLUTION: Some Music Won't Play After Upgrading Your iPhone To iOS7
    Red square in red circle cannot play songs
    My iPod isn't playing certain songs. Help?

  • Movies in Itunes not showing up on Apple TV

    I am finding that some movies which I have added to Itunes and play fine on my Mac, do not appear on my Apple TV.  They are mpeg4 with the H.264 codec, which is what all my videos are.  I have tried rebooting the ATV and also restarting Itunes on my Mac, but still the same thing.  I have a category which contains 7 items, but only 5 of them appear on the ATV.  It's driving me a bit crazy!  Hope someone has an idea about what to do.
    Thanks!

    RogerOut makes some good points and this feels to me like a ham fisted attempt by Apple to take control of my media in a way that I don't want.  The stuff it is choosing to call "home movie" is 100% legit movies, but not ones I bought through the itunes store.  So I load a movie and then it mysteriously does not show up in my Apple TV because it has defaulted to "home movie".
    What I still fail to understand is what the heck is the purpose of this apart from annoying users who's stuff now does not appear on ATV without explanation or warning.  So glad to have this forum to help me, but why should I have to do this to figure out how to overcome a stupid thing that Itunes is doing to my movie (it is a movie!)?
    As I say though, what possible benefit is it for a users media to be labelled in this way and anyway, why does calling it a home movie make it unreadable in ATV?

  • IPod Classic no music, freezing iTunes, not showing up, HELP????

    I have a used iPod Classic 120GB. I bought it off my friend. I took it home and added my files (about 5,000 songs and 13 videos) to his stuff (about 6,000 songs) and ended up with it being about half full. I let it sync, then ejected and disconnected. But it said there was nothing on it. I went back and reconnected it to my iTunes. The iTunes froze, and I couldnt access the iPod in anyway. I disconnected it, and when I did it unfroze everything, and popped up in iTunes, saying that the iPod was missing.
    I checked the iPod's "About" section and it said that it had 56GB of "Other". I took it back to my friend and he said he deleted the folder with everything in it. It is empty now except for 1.2 GB of who knows what, but still freezing my system and not showing up.
    I have tried restarting it, and putting it into disk mode. Nothing worked.
    HELP
    Version: 2.0.1 PC
    Message was edited by: black-belt-boy

    jartis wrote:
    HI, i am having the same issue with my ipod. Can you please tell me what you mean by putting on "disk mode" and deleting the files? Thanks
    First let's make sure the drive is physically OK...
    *Check your iPod with Diagnostics Mode*
    It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
    Retracts: 889
    Reallocs: 12
    Pending Sectors: 0
    PowerOn Hours: 2202
    Start/Stops: 894
    Temp: Current 24c
    Temp: Min 10c
    Temp: Max 50c
    Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
    With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
    Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
    *Reallocated Sectors Count*
    Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
    *Pending sector count*
    Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
    Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
    <hr>
    Assuming you've ruled out a physical problem with the iPod's drive we can now move on to check for logical problems...
    *Check iPod hard-drive for errors*
    Hold Select+Menu on the iPod for about 6 seconds until it resets, then hold Select+Play as soon as the Apple logo appears, again for about 6 seconds to put the machine in disk mode. Open iTunes and in the Sync tab of the preferences menu check *Disable automatic syncing of all iPhones & iPods*. Now connect your iPod to the computer, wait until it connects, then close iTunes. Browse *My Computer* and right-click on the drive for the iPod, click Properties, then click Tools. Under Error-checking, click *Check Now*. Under Check disk options, select *Scan for and attempt recovery of bad sectors* (Optional - takes ages but a good idea if you've reason to suspect physical damage). Click Start. Mac users should run *Disk Utility / Repair Disk* for the equivalent process. This should find and correct any errors in the logical & physical structures of your iPod's hard drive. Once these have been fixed you can reset the iPod (hold Menu+Select ) and should stand a better chance of a successful restore. It might also pay to check the status of the source drive containing your media, particularly if no errors were found on the iPod.
    And if that still doesn't help try Erase your iPod - The Super Fix for most iPod Problems. Basically a low level format of the iPod’s hard drive to get around whatever problems are stopping iTunes from restoring it.
    Once you've restored your iPod don't rush to dump all the data back exactly as it was before. I have found that lots of large or complex smart playlists can sometimes trigger constant reboots or dumping of the iPod's library. In addition, larger transfers can fail leaving data in an inconsistent state. Try this technique for populating the iPod in stages.
    *Break up large transfers*
    In iTunes select the menu item *File... New Smart Playlist*. Change the first drop-down box to Playlist, the next to is and the next to Music. Tick against *Limit to*, type in say 10, then change the drop-down to GB, and set the last drop-down to artist. When you click OK you can enter a name for the playlist, e.g. Transfer. Now sync this playlist to your iPod rather than your entire library. When the sync is complete modify the rule ( *File... Edit playlist* ) to increase the size by your chosen amount, then sync and repeat. You can experiment with different size increments, if it doesn't work just choose something a bit smaller until it works each time. Before long you should have all your music on your iPod. Once that's done you can move on to other media such as podcasts, videos, photos, playlists etc.
    tt2

  • My apple tv is not showing or connecting to my 8 month old Imac

    I can not get my apple tv to connect to my Imac. was working fine last time I used it a week ago. Now it's not showing on my computer and will not connect. Went through entire troubleshooting guide, everything is proper, but still does not work...

    Welcome to the Apple community.
    A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
    Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
    You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
    Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

  • ITunes not showing app updates from iPhone

    I did some searches and found some people that have had similar, but not exactly the same problem.
    My iPhone 3GS shows that I have four apps that need updating. I don't like to use my data plan for updates if I don't have to, so I prefer to update via iTunes. The Problem is that when I go to iTunes, it does not show that these updates are available.
    Phone Software Version 4.3.3
    iTunes Version 10.3.1.55
    All the apps that have updates (according to the iPhone) are set to sync when connected to iTunes, but syncing them does not get the updates to show up in iTunes.
    If i go to the iTunes store through iTunes to try and re-download them, it already says "downloaded" and so I can't re-download them to get the newer version.
    If anyone knows where I can find the answer to this, please provide a link. I'm don't mind reading...I just had no success when I was searching myself.

    I have exactly the same problem.  I think it started some time ago (perhaps a couple of month).  Prior to that, I'll go to iTunes and get the apps again.   Now it says 'downloaded' but WHERE??????

Maybe you are looking for

  • How can I stop Firefox from blocking content on certain websites?

    I have a website that I use for school, and everytime I log on there is content on a page that is blocked. To unblock it, I have to click on the shield drop down menu and click allow so it can display the content. But this is time consuming because i

  • Retention field is missing on Payment Processing Tab - Purchase order

    Dear Experts, I have configured retention and also activated the switch LOG_MMFI_P2P ..Payment processing tab is now appeared in PO but Retention field is missing. Please check below screen shot. There are many posts related to Retention config, i ha

  • PSA to Multiple Data Targets in process chain

    Hello All, I am trying to create a process chain that loads data from an already loaded PSA to further targets. (Note that the infopackage to load from R/3 to PSA is in another process chain). I am using the "Read PSA and Update Data Target" process

  • My Safari browser is not working properly. Any suggestions?

    When I access my online banking site. I can no longer view and pay bills. Each time I click on that option, the browser goes right back to the opening login screen. I have tried a different account and the same thing occurs. This started after I clic

  • Auto increment for file names

    Does anybody know if it is possible to have the 'Open/Create/Replace.vi to search for exsisting files with a specific pattern, like data001.txt, and automatically increment the name so a new file is created called data002.txt Thanks Ed Ed Dickens - C