HT4356 Has anyone tried AirPrint with a HP LaserJet Pro 400 Color MFP M475dn ?

The HP site here<\a> claims AirPrint is not supported for this model but the Apple site here<\a> claims other wise.

So, i tested it out already. AirPrint works for this particular HP Printer. I had to connect a wireless router to the printer thru the network port. Hope this helps anyone facing the same problem.

Similar Messages

Cannot connect to HP ePRINT Web site with LaserJet Pro 400 colour MFP M475dw

LaserJet Pro 400 color MFP m475dw- Just installed. Scan, print ,copy ,fax all working fine! using WiFi
Using IMAC OS 10.8.2 with all updates
Using Netgear router DGN2200v3
Printer will not connect to HP ePrint Website
Printer connects to the Hp Support and Profile for fax set up etc. But the "HP Web Services" Section when entered and hit the Enable Button-- It does not connect to the site --- it just seems to just refresh.
if i try to connect thro the printer not the imac and try enable web services it says" Connecting " on the screen BUT after a few minutes of trying -------- then says " CONNECTION ERROR-- the printer is unable to connect to the service. Check the internet connection
ANY IDEAS-- AM I MISSING SOMETHING ???
MANY THANKS
This question was solved.
View Solution.

I would try pulling up the embedded web server (EWS) by entering the IP address for the printer in to a browser and set a static IP address & DNS.
The information for the default gateway, subnet mask and that IP address can be accessed from the Setup menu on the front panel, go to Setup>> Reports>> Network summary and that will print it off.
Once you have entered the IP in to a Browser and have the EWS pulled up, navigate to the tab at the top labeled “Networking”. Then click on IPv4 in the left column; that will bring up the Address configuration page. Set the radio button to manual and fill out the IP address, Default gateway and Subnet mask with the information from the report. Do not worry about filling out the portion titled WINS server, that can be left alone.
You will then want to fill out the DNS portion of the page, The Preferred should be set to 8.8.8.8 and the alternative/secondary should be set to 8.8.4.4. Then click “apply”
Power cycle the printer. Turn it off, wait 30 seconds and then turn it back on. Once it is completely up and running reattempt to connect to web services.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Has anyone tried Kensington RAM in their Mac Pro?

Has anyone tried Kensington RAM in their Mac Pro? I found this ram and that is far cheaper than OWC or apple.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820139940
Please let me know what your experience has been with 3rd party ram.
Lester

NewEgg: " Memory returns allowed for 30 days, subject to 15 percent re-stocking fee. "
So YOU are the expert about which are the correct modules. a mistake costs you 15 percent plus shipping.
I prefer to do business with mac-centric vendor who lend me their expertise and tell me what memories work in my Mac, "Guaranteed or your money back."
OWC is one that does business that way.
Data Memory Systems does as well, and that is the outfit I use.
The last 1333 8GB module like these I bought from them came with a large flat heatsink installed. I put it in my Server. The price has fallen a bit since then, and now they are asking US$78, but "Guaranteed."
http://www.datamemorysystems.com/_apple_info/Apple_Mac_Pro_12-Core_Xeon_Westmere _2.93GHz_Memory_1632.asp

HP LaserJet Pro 100 color MFP M175nw unable to communicate with product

Hi guys,
I've had a HP LaserJet Pro 100 color MFP M175nw for 12months now and it has worked great over my wireless network. I recently upgraded from router from a 5 year old single band router to a late model dualband wireless N router.
Since i did this my HP LaserJet Pro 100 color MFP M175nw was unable to reconnect to my new network.
I have uninstalled the drivers and have tried reinstalling the drivers but each time (after I select Connect the Product/Coonect through wireless network, have tried both Yes retrieve the wirelss settings on my computer and No I will enter the wirelss settings manually) but no matter which I select the printer is installed successfully but then gets stuck at 15% and says cannont communicate with the product.
I have disabled my firewall during the installation and have only used the USB cable when the installation has asked me to do so.
The printer is visible in control panel but each time I do a test print or send something to the printer in the sys tray the print job is shown but nothing ever happens.
The installation will work fine if I install it via the directly connect to the computer using USB option.
If I do a test print fromt he printer itself by going into the network setting, network test it prints a page that says:
Wireless On Pass
Wirelss Working Pass
Network Name SSID Found Fail
Security Fail
Your HP printer cannot find your wirelss router. The WPA authentification method on your HP has changed fromt he default setting.
Is there anyway I can edit the SSID network name and password without having to do this install process?
This is really frustrating. Just spent 3 hours with HP support which got me know where (they were reading the script the supplied me) and then when I rebooted and went to go back to online chat support the website tells me their support is only available during business hours!
Any help would be great

OK time to back up totally. I need to make sure you are following the instructions in the user guide to install this printer. Please start from scratch by uninstalling all software from your computer and outline every step to make sure it is correct.
You have to use the USB cable to set up the wireless connection.
Go here for the User Guide and all installation info. Get your drivers and troubleshooting info here too.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=5076465
The reason we have to start over is that you started the software installation when you changed your router. You don't have to do this, but now we do.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP LaserJet Pro 300 color MFP runs cleaning and Mis Prints Error with Printing above 5 pages

I have an HP Pro 300 Printer with New genuine cartridges. But when I print or make copies of multi page jobs it always comes up with a message on the screen which says "cleaning" and then give a "Mis Printer Error".The printer is out of warranty. The Print quality is excellent but the error it gives all the time is a major problem. Has anyone solution for this? Please help! Thanks

Restoring the defaults doesnt usually purge out the memory of a printer. You need a cold reset to complete that proceedure. Cold Reset steps:http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-Cold-reset/td-p/5060955 The video at the bottom of the first page is very helpful.

HP LaserJet Pro 200 Color MFP M276nw scan to mail with google.

hello,
i got a HP LaserJet Pro 200 Color MFP M276nw printer. and i want to use the scan to mail feature.
But when i am setting up my google account as head account where the printer should send the mails from it doesn't work. i don't get the scan's into my mail. does somebody got a user guide for me how it is done and with the settings i have to use?

Hi @dennieboy96 ,
I see by your post that you would like to setup the scan to email. I would like to help.
Are you trying to setup the scan to email from the printer or from the HP Software?
I have included both documents.
Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 Color MFP M276n issue with the software

Dear Members,
When i'm trying to install the drivers for the printer HP LaserJet Pro 200 Color MFP M276n, on Windows Xp the issue is specific on windows xp only i tried on two machines its the same and its fine when i try to intall on windows 7.
Error Message:
A problem occured while preparing to install software to your system please restart your computer, and run this installer agian.
Please assist me for the above issue and thanks.
Regards
mbsiddiqui

Hi mbsiddiqui,
When a printer is connected by USB, the computer recognizes it and it will show up in the device manager, if it didn't fully install it will still be listed in the device manager and will not find it again when the printer is reconnected. We have to remove the old entry first.
Leave the printer connected by the USB cable.
Check the device manager to see if the printer is listed.
Go to start, right click my computer, left click properties, click on the hardware tab, then device manager.
Look for the printer entry, it might be listed as other devices, unknown device, delete the entry by right clicking it and select uninstall, it might show up under universal serial bus controllers as USB printing support, if USB composite device is listed then also delete it, delete the entry by right clicking it and select uninstall.
Since the software is already installed for the Ethernet connection, from device manager, click on Action and select scan for new hardware.
If it doesn't find the printer then it might have a ghost key in the registry causing the printer not to be detected again.
Let me know the results.
How is the printer listed?
Were you able to find new hardware?
What is the printer entry showing now in the device manager?
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet Pro 200 color MFP m276nw no network connection with Linksys HUB

Hello
I've setup my LaserJet Pro 200 color MFP m276nw to connect to my home network using a wired connction.
When connected directly to my router the connection initializes and successfully recieves an ip address. I've been able to access all the network function connected to my router directly either wired or wirelessly.
I also have an old Linksys hub and when the printer is connected to the hub, it does not initialize the network connection. The hub works with every other sevice in my network, including a few game consoles and a Mac Mini.
Is there an advance network setting I should be looking at?
Thank you
This question was solved.
View Solution.

Hi,
Remove any wired connection before attempting to connect via wireless.
Print off the printers network configuration and check the settings against your routers settings.
Ensure that router and printer are using the same frequency.
Review this HP posted information once you have the above information in hand.
This information might also be helpful.
Review page the wireless setup information starting on page 115.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Has anyone tried Thunderbird with Mavericks?

Given that Mail is so completely useless at the moment, has anyone tried Thunderbird under Mavericks?

Hi mmollo22. I use an external monitor with my iMac - Dell U2412 connected via RGB
Mail window on Dell - Reply window appears then almost immediately disappears UNLESS
                                        1) Full screen mode
                                        2) Pre-existing Reply window exists and is visible
Mail window on iMac - Reply window appears on Dell regardless of pre-existing windows. Full screen mode reply
window appears on the iMac.
Others are having Gmail difficulties. I haven't tested mine thoroughly yet, but it seems unaffected, which would also be strange.

Windows 7 32 bit with no support for HP Laserjet Pro 400 color M451dn help.

I live in a mac / PC house, I have to admit that the apple movement is growing here.
My problem Is getting my small little PC netbook Windows 7 32 bit to be able to print to my new HP Laserjet Pro 400 M451dn printer which is plugged into my 2 TB Time Capsul.
I have been successfull connecting the mac computer, and my old Windows XP computer and they work perfectly.
Everything is connected throught an etheir net corded network in the house.
I used Bonjour to connect the Windows XP computer and it worked like a charm.
When I used Bonjour to connect with my Windows 7 computer the pinter HP Laserjet Pro 400 M451dn is not listed. I have a disk with the drivers that came with the printer but it is a setup disk which is not able to provide the necessary drivers.
If any one has some suggestions I am open to give them a try. I have a portable CD / DVD player burner that I can hook to the net book as it does not have a CD drive.
Thanks

Okay, so I'm feeling slightly stupid right now. I decided I would shut the printer down for about an hour to see if that was it and what do you know- it was! I had shut it off a few times before but I guess it just wasn't long enough. What a pain!
Thank you to anyone who took the time to read this! Sorry to waste anyone's time!!

Has anyone tried the GSP covers for MacBook Pro?

I am about to buy a 15" MacBook Pro & 3G iPhone and want to protect my babies Has anyone bought the clear skin from the SGP store? Any reviews? They also have a keyboard cover that's half the price of the Moshi one and looks identical to me. The SGP store address: www.sgpstore.com

Congrats !
Here's some information from research done in the past few days. BEST Keyboard protection:
Keyboard cover that is thin & fits the keys is called u-cover from a company called uniea. Also, youtube: "marware protection" or youtube: "macbook pro protection", you'll find the marware product which i liked, it covers the track pad and wrist area.
There are many choices out there, I like to find the youtube reviews and/or thorough articles that review the product over several months of usage.

Can x-fi work with sp1 / has anyone tried it with

hello, was wondering if it's possible to use the x-fi card
with windows xp sp. i have sp2 BUT found that it's like a wobbly jelly ( jello ) very unstable, thats why i would prefer sp instead.
would be grateful for any info.
john

Sp2 works fine. Just keep it.Message Edited by Kyle20 on 08-3-2005 0:05 AM

Has anyone had issues with the new Mac Pro computers and the Adobe Application Manager?

We just purchased a new Mac Pro and transferred everything from the old computer to the new one. Now we are getting Adobe Application Manager errors and it wants us to download Application Manager. That leads us to the Adobe Installer that encounters the following issues
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem. But that doesn't work either.
Anyone run into this?

Yep, half of my tracks are coming up displaying an error -69 ( http://docs.info.apple.com/article.html?artnum=302684 ) and every time I remove a track from the shuffle or update the shuffle, Itunes opens a window displaying the contents of J:\ (obviously the ipod) and hidden folder \iPod_Control.... I'm really irked with this. Been mucking around with the stupid thing for hours now.
Nothing was wrong with it until it suddenly decided to stop working, it wouldn't play tracks and Itunes wouldn't recognise it, hadn't missed a beat up till now. Sifted through the Support site for an answer and getting told I needed to update Itunes and update the Ipod software, ***?? It was working fine before. Me thinks Apple have inserted software in ipod to force users to update to newer version of Itunes. Anyway, ever since updating to the latest Itunes, the Ipod is back in action, but it is trying to tell me that half of my mp3s are corrupt (see error -69), rofl, um no, it's your stupid software Apple, I'm off to by myself a decent MP3 player without the bloat software.

LaserJet Pro 300 color MFP automatic document feeder - page stops feeding with 1" to go

Scan page won't finish feeding when using the automatic document feeder. Leaves approximately the last 1 to 2 inches of paper in the scanner. The Scan ADF Paper Jam error message pops up. Seems like the page hangs/gets stuck once the page passes through the document feeder roller assembly. Haven't been able to find any information on what moves the paper through the scanner once it gets past this roller assembly.

@Debbie-M
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

HP LaserJet Pro 200 color MFP M276nw - Printing problems with HPeprint App on Ipad mini

Hi,
my name is Domenico and I have the following problem:
I have setup my HP LaserJet Pro 200 color MFP M276nw in HPePrint App on my Ipad mini, but I am able to print directly.
When I send a page to print through my tablet, on the printer screen I can see the following message:
"Manual feed.
Plain, A4
Or press [OK] to use available media"
So, I have to press OK on the printer screen to print the page.
How can I avoid this problem?
Thanks,
Domenico

solved!!!
Domenico

HT4356 Has anyone tried AirPrint with a HP LaserJet Pro 400 Color MFP M475dn ?

Similar Messages

Maybe you are looking for