HT4356 My Ipad prints to my airprinter that works OK but how do I set picture size/position etc

My Ipad prints to my airprinter that works OK but how do I set picture size/position etc. At the moment from the photos app it prints an A6 photo in top left corner. How do I change that to something different.

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
If you put photo paper in the printer it will print correctly on the paper. Also, some photo printers will adjust the size photo printed when you put different size photo paper in the tray.

Similar Messages

I am having trouble with the "numbers" app on my MacBook Air. I go to print my document and that works just fine. I cannot however return to the document after printing. What do I have to do?

I am having trouble with the "numbers" app on my MacBook Air. I go to print my document and that works just fine. I cannot however return to the document after printing. What do I have to do?

RR,
Not to worry, you're not the first to expect Print to finish by returning you to the edit mode. The thing is that Printing is so hit and miss with this version of the app, you will probably want to stay in the Print window for more than one attempt.
Jerry

I have a 2011 gen 2 iPad that works great but is it time to replace it?

I have a 2011 gen 2 iPad that works great but is it time to replace it?

Ditto with my iPad 2 - have used it heavily since the day I bought it and it works great. I've noticed the battery doesn't hold a charge as well and it takes quite a bit longer to recharge. If everything keeps working I don't plan on replacing it until it can't be updated with the latest IOS version - the situation the iPad 1 is in.

Could you help me with an app situation? We purchased several codes for Splashtop to install on our iPad 2's. It was working great but now that we upgraded the OS they have disappeared. The codes that we purchased are giving us an error that they have alr

Could you help me with an app situation? We purchased several codes for Splashtop to install on our iPad 2's. It was working great but now that we upgraded the OS they have disappeared. The codes that we purchased are giving us an error that they have already been used. So far it has only been 2 iPads.
Any solutions?

The compiler is highlighting the areas you got wrong, although the error messages are somewhat confusing.
Error 1: NSLog is a function and needs to be called as such, see e.g. the circleArea call on the line above. Functions are called using the function-name with its arguments in paratheses e.g. foo(12, 13).
Error 2: looks like a typo, defining a function is done as function-name(... <arguments> ...) { ... <body> ...}. In your code there is a ";" between the arguments and the body that should not be there, you probably copy pasted it from the forward declaration at the top of the source codde file.

Back in Dec I updated Itunes, with the new version, my IPHONE now I can no longer sync to Itunes. I have an IPOD that works fine but the IPHONE does not. What can I do?

Back in Dec I updated to the new version of Itunes. Since then, I can no longer sync my IPHONE. I have an IPOD that works fine, but the phone is not found on Itunes. I am abled to download pictures to my computer, but I can not sync my music. What can I do?

Click here and install the software.
(71121)

Updated to OS X Mavericks and my samsung printer CLP-315 doesn't work anymore. How do I fix this?

Updated to OS X Mavericks and my samsung printer CLP-315 doesn't work anymore. How do I fix this?

If the software doesn't install or doesn't work, you may be able to adapt the solution in this thread:
Has anyone installed a samsung SCX-4826 with mountain lion?

I have bought an additional iPad (mini) for my wife, but how do i set up her email address only without mine appearing on her iPad?

I have bought an additional iPad (mini) for my wife, but how do i set up her email address on her iPad only without my email accounts also appearing on her iPad?

It sounds like restored one of your own backup when you activated her iPad. If you just activated the device and you want to share an Apple ID for purchases, you should, either erase the device and start all over again and NOT restore your backup - or simply delete your email accounts and set up hers in the settings.
To erase the device and start all over again, go to Settings>General>Reset>Erase all content and settings. If you enabled Find My iPad, you will need to enter your Apple ID and password to erase the device.
You can delete your email accounts, in Settings>Mail, contacts, calendars>Account Name>Delete Account.

HT4356 New iPad print option

I need to print from my iPad and I can not do it. My printer is a HP office jet 6500 wireless e709n. Right now my printer is wireless and I be able to print from my iMac an laptop . Please how can I fix my problem with the iPad.bathe message that I get in my iPad is, no AirPrint found .

airprint is a generic protocol for ios devices because they dont have printer drivers like computers does
and for a printer to be able to be printed to the printer have to support the std airprint
otherwise you need to download a hp printing app from the app store

IPad printing to non AirPrint printer???

Is there a way to print from ipad to a non AirPrint printer?
I have a HP OfficeJet Pro L7680 which works fine with my PC but I don't want to buy a new printer.
Is there an app for this or adaptors which could work?
thank, peter

Hello Pedhed36,
I've included a link below with ePrint info. (eMail addy, etc.) Good Luck!
To find your HP ePrint email address:
Go to ePrintCenter and log into your account, you will see your email address in the ePrint panel.
Look for the ePrint icon:
For Photosmart: On the printer's front panel display, touch Wireless>Web Services>Display Email, or if available on your device, touch the ePrint icon on the printer front panel.
For Officejet: On the printer's front panel display, touch the ePrint icon (4.3” display only) to display the email address or Setup>Web Services Setup>Printer Email Address to reprint the information sheet.
Photosmart Only: If you register your printer at ePrintCenter.com, your email address displays on the ePrint panel.
For LaserJet: On the printer's front panel display, touch the ePrint icon or “How to Connect” to display the email address. For LaserJet printers with the small 2 line display, please print out the information sheet to see the email address.
https://h30495.www3.hp.com/help#eprint
I work for HP but my posts and replies are my own....Thank you!

HT1150 My question on printing is how do you make the print larger than it actually is on paper or is that possible? I know you can enlarge print on the screen, that is easy, but once it prints it's always to small. How can I make it bigger or is that p

my question is on printing. i know that you can make the print larger on the screen by adjusting it, but then when it comes out on paper it's just as small again. how do I set my actual printer or my iMac to print the actual paper print larger?

Hello, it depends what App & Document type, some say PDFs have the font stuck at a certain sise, but say in Text Edit, open a document, Highlight some text the CMD+a to Select All, then type CMD+t to get the Font/Text size menu, select a bigger size.

When i cropped a picture using the crop tool to 9x6" when it was printed everyone was stretched looking tall and thiner how can i crop pictures but keep the people looking as they do in real life?

oops put the while question in the wrong place!!! but I'm at a loss on how to do this every picture I took everyone looks stretched when I use the crop tool any help would be much appreciated,
I have PS6
thank you

suzukidi wrote:
I have been trying so hard to try and get my head round this since your last comment so what I think I know is with my Nikon d80 having 3:2 aspect ratio pictures that I wanted printed can only be the sizes you mentioned above which is fine as the pictures I got printed were 9x6" but it's from now I'm still bit lost when I use the crop tool and pre set the size to 9x6" with a resolution of 240 and crop out all the bits I don't want it comes back from printers stretched so i'm still lost as I don't know the point where I'm doing something that causes the stretching? thank you for your patience
Lets separate this into topics Aspect Ratio, resolution and size ... etc
Aspect Ratio is just the ratio of an image's two sides. Your camera captures an image with a 3:2 Aspect Ratio. If you want to print the whole image your camera captures it can be printed and image size that has sides the have a 3:2 ratio without distorting the image.
Images are re-sized two ways:
One way is to keep the pixels your camera captures and print them at different resolutions. Resolution is nothing more then pixel size. Pixels have no size till there is a resolution set. Pixels themselves may have a aspect ratio themselves. These days most devices use square pixel. Some video standards use non square pixels. So if you have square pixels and an image with 1800px by 1200px and set the resolution to 300DPI the print size will be 6" by 4" if you set the to 200DPI the print size will be 9" by 6". Its simple math. 300DPI means pixels are 1/300"x1/300" there are 90,000px/inch 200DPI 1/200"x1/200" 40,000px/inch 100DPI 1/100"x1/100" 10,000. Note how quickly the pixel count climes as resolution increase doubling an image resolution requires four times as many pixels not two timas as many.
The other way is to create a new image using the pixels you camera captures. Your Camera pixels are resampled(interpolated) into a totally new image not a single camera captured pixel remains intact the new image has a different numbers of pixels it a different image. There are different interpolation methods some work better then others depending on image content and the direction of the re-size. Any time you resample an image you loose some image quality. The pixels are generated they are not captured using optics and a sensor.
Normally I do not resample when printing I just set the DPI so the image prints the size I want. In the Image size Dialog I un-check resample and the set the print width or height I want to print. Photoshop will calculate the DPI and set the other side size. If you crop without setting a DPI resolution in the crop tool the crop tool will not resample the crop to a particular DPI it should just set the appropriate DPI.
I resample image for the web Cameras capture more pixels then can be display by displays. So in the image size dialog I check resample and constrain the width and height to the image current aspect ratio then I set the number of pixels I want the width or height to be. Photoshop will calculate the number of pixels the other side will be. The DPI is meaningless for web images for Web images are displayed on screens at the resolution a displays has. Your images will display large on a large Low DPI resolution HDTV screen and small on a high resolution cell phone display.
If you want to print you image a size that does not have a 3:2 aspect ratio without distortion you need to crop you image to the aspect ratio you want to print at. You need to discard part of your image. The Crop Tool does not distort it discards part of you image. It may or may not resample the crop selected. I do not use the crop tool but if I did I would not use it to resample the crop I would not set in a DPI resolution in the crop tool.
Photoshop can also resize an image from one aspect ratio to and other aspect ratio a non constrained resize. The resulting image will be distorted. However Photoshop does have have a content aware re-size that tries to maintain recognizable objects perspective during the distortion process. This process can also be aided by user masking.
Cropping:
A 3:2 aspect ratio image can in theory be cropped to an infinite number of smaller images that have any aspect ratios including an infinite number of images that have a 3:2 aspect ratio. All crops can be resampled to a particular DPI resolution. However digital pixels can not be sliced up so there are a finite numbers of crops you can hack form a digital image

Web page comes up in small print. I understand "cntl ++" but how due I adjust the size to make it larger when it 1st displays?

I open a web page and it is displayed in small print down the middle of the screen. How does one adjust the text size so it is larger print when it 1st comes up so I do not have to keep hitting "CNTL++" all the time?

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use one of these extensions to set a default font size and page zoom on web pages:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

My printer will not print the web pages using firefox...how do I set it up to print a web page?

I have an hp photosmart c4180 printer and it will not print the web pages in firefox...how exactly do I set up FF so I can print web pages? I will need step by step instruction also on exactly where to go to set it up.

Open System Preferences (gear icon on the dock), then open Print & Scan
Click the + button at the bottom of the printer list
If your printer appears....not all printers are supported....click on the name to highlight it
Click the Add button to install the printer at the AirPort Express location
Try to print. You must choose the correct printer at the AirPort Express location since the printer is "installed" at other locations on your network.
If you open Print & Scan again, and select the printer at the AirPort Express, there is an option to make the printer the "default" location, so you do not have to choose which location to select when you want to print.

I have a 2013 Buick Enclave with Pandora icon on the screen. I was told that to connect my iphone 5 with USB port and that worked. But as soon as I disconnected, Pandora went out on screen. Only works plugged in now. Should work without USB connected.

I have a 2013 Buick Enclave with Pandora and Stitcher on the nav screen. With my Samsung S3, Pandora automatically lit up and worked. with new iphone5, I was told I need to connect USB port to car and phone and start Pandora. That worked and the icon on screen lit up. but as soon as I removed the USB cord, Pandora and Stitcher greyed out and stopped working. I know it's supposed to work on the car's nav screen once I hardwire it (at least that's what I was told), but as soon as I disconnect, they stop working through the car. How can I install Pandora and Stitcher on my car WITHOUT having the usb cord attached? the idea is to be able to use the car's touch screen to control Pandora, but with the phone plugged into the USB port, I can only use the phone to control Pandora, which of course is dangerous when driving! And it worked correctly with the samsung, so I have to believe it can work with the iphone 5! Right? Thanks.

You cannot install the apps on the car.
The cars head unit is merely acting as an interface to the apps on the device.
If you want to use those apps in the car, plug the device in and leave it plugged in.

Can not connect the ipad 2 to wireless router. been working fine but some reason not working now being trying to solve this since 4pm today

Can anyone help can not get my ipad to connect to wireless today. has been working fine but all of a sudden will not connect to Router. I have a kindle and a mobile and both of these will connect to the router wireless but the ipad will not.
Been to my parents with the i pad and this will connect to their wireless router.
Can not think of anything else to try

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
 Cheers, Tom

HT4356 My Ipad prints to my airprinter that works OK but how do I set picture size/position etc

Similar Messages

Maybe you are looking for