HT4367 Anybody has a solution for network time and day set up for apple tv 3?I also have difficulty about my apple id and password with the apple tv. My password/apple id works fine with my other gadgets. Thanks. Ugur Erkmen
My problem started after the itunes update.i reset the apple tv.Now I cannot sign to itunes and i cannot reset the network time and day.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.
Similar Messages
-
The screen goes black 2 or 3 secs after lifting the lid, but comes back on if I disconnect the magnetic power lead, after that it works fine with or without lead. Anyone had this problem, and is it symptomatic of a serious fault?
It could be a software issue. I would reinstall the OS. You don't have to lose or reinstall any apps from archive and install. This way, your user folder remains intact but you get a fresh copy of the OS.
-
Trying to get to secure website (Login site for IRB at Ochsner). Worked fine with previous version of Firefox and continues to work with safari. I receive the following error code:
(Error code: ssl_error_renegotiation_not_allowed)
Any Thoughts?
Thanks,
M White New OrleansHere's one solution from last year: http://dotomaz.tumblr.com/post/786443743/firefox-4-0b1-and-ssl-renegotiation
-
I am having a problem importing my images into Aperture 3 from my Nikon D800E. The images appear as if red paint was splashed across the sky. The Nikon software used to transfer from the camera does not show this problem and Photoshop 6 is fine with the images exported as jpg from the Nikon software. Aperature does not even like the jpg images usable by Photoshop. I am suspecting that Aperture is not correctly using the camera raw file. Also, the histograms are radically different between the corrupted images and the Photoshop (good) versions. Aperture worked just fine for me in June with the same camera. All drivers and software are current as of this posting. Anyone else out there seen this before??
Are you sure you do not have Highlight Hot & Cold Areas turned on? (View->Highlight Hot & Cold Areas)?
The bug in Digital Camera raw only affected Raw images. In your first post you wrote:
Aperature does not even like the jpg images usable by Photoshop
If the JPG's have the same problem then it isn't this bug.
regards -
Thunderbird starting asking for my password. I know the password, just have not been asked for years.
After typing in password keep getting message
'Sending of password did not succeed. Mail server mail.intergate.com responded: dmanns logon failed '
however, I went to Webmail.intergate.com; was redirected to http://email.1dial.com/webmail/Login.aspx.
Can get email from webmail just fine (same password), just not via Thunderbird.
Have already run two anti-virus scans. Have deleted the saved passwords and re-entered them as the program asked for them and renamed key.db & signons.sqlite (Read this in a forum on the web) and they rebuilt themselves. Still can not get email via Thunderbird.Did you contact your email provider? They may have server issues.
-
Current camera raw is 6.6.
Support for the 5D Mark III was added in ACR 6.7:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Benjamin -
Help anyone?
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
Upgraded to Firefox 4 yesterday. Have since had a problem logging into my bank. I enter all log in details, click the sign in button and nothing happens, the page just remains static, there are no error messages. No problem logging in with Internet Explorer or on a separate computer with Firefox 3 so it must be Firefox 4 that's causing the problem. It's just this one site, all other sites I use requiring log in work fine. It can't be a problem with the site because as I said it works fine with IE and Firefox 3?? Help!
Have now ditched Firefox 4 and reinstalled the previous version-the problem has disappeared, doesn't say much for the new version!
-
After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones. The headphones work fine with other bluetooth devices. I haven't moved to iOS7 yet. Any ideas?
What user troubleshooting have you done on the phone? The steps are restart, reset, restore from backup, restore as new. Understand that a restore will put the latest iOS on your device. It is also possible there is a hardware fault on the device and the Bluetooth is failing. Anything is possible given the scenario you describe.
And as far as iOS 7.x is concerned, we have 5 different iPhones here at home, all with the latest iOS, a 4, 4s, 5c, and 2-5s and all are working just fine. So, a blanket statement such as the one provided by the other poster is not completely true. Others are not having any issues at all either. -
My apple extreme wireless network is working fine with two Macs but ios devices (iPhone & iPad) will not connect. I can see the network and it's telling me I'm connected but Safari says I'm not connected to the internet. Everything was working until the ISP went down. Any suggestions?
Thank you, I've tried the support tips (resetting the network, checking security settings, etc.) and rebooting the network devices several times to no avail. I've actually been working on this for several days (when I can afford to have the network down).
What I have to determine is what has changed in the setup...from when it WAS working just fine with all devices. -
So far I have pulled the system configuration file, I have reset safari, I deleted all old passwords from the wifi network in Keychain I restarted both devices. I am at the end here and I cannot get it to work I have an iMac that works fine with my network but for some reason this computer will not connect. It is system wide specifically to my personal hotspot. I can connect fine to any other network (wifi) but just not mine. I have not changed any wifi settings. I have been trying to figure this out. I have a MacBook Pro Late 2006 model running Lion (10.7.5) So any ideas anyone? Please help!
12. At a WiFi hotspot, you can't get connected. The most frequent reason is the login screen for the WiFi hotspot is only able to be connected with a single type of browser. If Safari doesn't work, try Firefox, Chrome, Omniweb, or Opera.
From my tip:
https://discussions.apple.com/docs/DOC-6411 -
With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.
From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked. -
My iPad2 is set up with my Apple ID and works fine with iTunes. But when I try to use the app store, my wife's apple ID appears in the password window, not mine. How can I get my apple ID to show up?
Sign her out and sign yourself in!
-
Apple TV 2 is asking for network time before I can purchase a movie? Even restarted it and still did the same thing.
How do you fix this? My wifi is operating 100% connected and I can access the Itunes Movies etc. How do I get it to work again?Welcome to the Apple Community.
If you've had it working previously, try restarting the Apple TV by removing ALL the cables for a 30 seconds, or a restore if the problem persists. -
I have NEVER been able to activate my iMessage on iPad with Retina Display - My Apple ID/Password works fine on all other programs. iSO is up to date. No troubleshooting has worked so far. Any tips please?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.
Maybe you are looking for
-
just a summary... i have a iphone 3G which i have been using for a long time and now i got an iphone 5s.. troubleshooting this kind of stuff is not new to me from computers to smartphones.. the internet has a vast majority of information and all you
-
I just installed 11.0.5.5 and I can no longer sync with my iPhone 4 or my iPhone 5. Any thoughts? It went from accurately displaying my content to showing most of the content as "Other" and now says it can't sync because it can't determine the apps t
-
it will not let me redownload my free apps and it says its is no longer available but it still is what should i do?
-
Issues with iFrame elements in Illustrator
Currently I'm having issues with adding an iFrame element to an extension run in Illustrator. I'm using Eclipse 4.3 to run extension build 3, release 3. I've created the basic project, and I get the extension to function correctly when there's just
-
How to define user status that forbids editing the document
Hi All, Im working on CRM 7.0 I need to define a user status say " ON HOLD" . when this user status is set the document should not be edited or changed by anyone. However as soon as we move to next status document should be editable. I configured a