HT4367 i restored my apple tv 3 and it still doesnt work
I restored my apple TV3 with itunes and says it was restored successfully, but it still doesnt work.
Welcome to the Apple Community.
What exactly doesn't work.
Similar Messages
-
my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work, my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work
Hello there, LaruaGalliers.
The following Knowledge Base article provides some great troubleshooting steps for your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
Battery does not charge
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
iPhone or iPod touch displays the low-battery image and is unresponsive
If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.
You should see this image when iPhone or iPod touch begins to charge:
If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
If the issue persists, follow these troubleshooting steps.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
when i plug my ipod shuffle 4th generation in a box pops up and says the right files for this ipod isnt on the system?? sooo i re downloaded itunes and it still doesnt work soo i deleted it all and eredownloaded itunes all up to date and it still doesnt ! any help please
What was the exact error message you received? When you removed and re-installed iTunes, did you use the precise instructions in this Apple support document to walk you through the process?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
B-rock -
on my macbook my one button delete botton sound buttons and escape doesnt work i updated everything and it still doesnt work what do i do
Unless somebody else has a micracle workaround I don't know. Probably get the phone in for repair since it has been living on borrowed time so far and now you absolutely must have a working button.
-
My contacts on my iphone haven't synchronised with my address book on my MAc. Have done every remedy listed and it still doesnt work. Any ideas?
The way iCloud works is that it isn't actually 'syncing', though this is how it's often referred to. The data lives on the iCloud server and is read from there by the various devices (just like webmail). Therefore when you make a change on your iPhone you are actually changing the iCloud website (there is an internal procedure to allow you to make the changes while you are offline, and they are then changed on the site when you next connect).
Therefore any device whose changes appear on the iCloud site, and who can read changes on the site made by other devices, is working: and any device whose changes do not appear, and which cannot receive changes made by other devices which have appeared on the site, is failing to connect. This appears to be the issue with your Mac.
When this happens, sometimes signing out and in again resets the whole setup and corrects the problem. If another device such as your iPhone is connecting to the iCloud server correctly then nothing you do on it will affect your Mac. (In fact even if it isn't connecting it has no effect on your Mac, only on its own ability to transmit changes to the iCloud server). -
I dont know why this doesnt work now. I updated to 11.1.3 on my windows laptop. I followed all the steps on other posts but it still doesnt work... HELP!
Welcome to the Verizon family irishlass82! I know how important it is to stay in touch and we'll make sure that you don't regret your decision! Before trading in your device, did you turn off iMessage? In effort to correct this issue, text the word STOP to 48369.
AshleyS_VZW
Follow us on Twitter @VZWSupport -
every time i try to update my iPhone to IOS 7 it wont because of "Unknown error (3199) Any1 have any ideas? i have done that Drivers thing and it still doesnt work
Ios has not been released. It is available in test version only to registered developers.
If you are a developer then you nkow better thatn to post this here. You should use your credentials to log into the developers forum.
If you are not a developer then you are illegally downloading the software. -
I went in to apple, they couldnt figure it out, I am on AT&T so I was figuring on going into their store today and seeing if its something with the network, if not I am going back to apple, but this is literally a brand new phone i bought yesterday, not refurbished or anything, brand new, does anyone know why this isnt working? Everything else works fine, the mics both work, its just when I make calls or someone calls me the mic doesnt work.
When you see the same issue on more than one hardware device, it means that the problem is likely to exist outside of the hardware. Two things to investigate would be the software/firmware on the backup and issues with the cellular network. It's probably safe to rule out the cellular network as well.
First, make sure that you have imported copies of all the information (pictures, videos, documents) on the device. Do this thorough itunes, and the applications (photographic and document processing) on your computer. Perform a firmware update then restore the device as new. If the problem persists, then you may actually have the worst luck and discovered two devices with an identical issue.
Read each of the steps before initiating the DFU.
!. Connect the iPhone to any computer running a fully updated version of iTunes.
2. Press and hold both "home" and "sleep/wake" buttons
3. After eight seconds let go of only the sleep/wake button.
4. Keep holding the home button until you see a popup mesage in iTunes.
5. Read all all the popups, then use iTunes to update the iPhone's software.
If the popup fails to show, repeat steps 2 through 4 -
I've downloaded iTunes 12.0.1.26 3 times after the update and it still doesn't work! Every time i start it up it comes up not responding, why is this happening? how can it be fixed? I currently cannot use iTunes!!!!!!
Hey High Socks,
Thanks for the question. If I understand correctly, iTunes isn't working when you try to launch it. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
please help me
Hello cyliss69, try a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
Please report back to see if this helped you!
Thank you. -
PLease help!
Did you ever got this resolve? I have your same problem phone type and all.
-
Idvd #8 and widescreen still doesnt work!?
ok, i shot some HDV 1080i, downconverted it as sd widescreen, edited in imovie as widescreen, exported using quicktime as 16X9 853X480 dv video, imported that into idvd widescreen, and the preview shows 4X3. HOW HARD IS IT FOR THIS TO WORK CORRECTLY? Does apple actually expect us to all just buy apple tv's instead?
come on now...
thanks for any help.I just updated to iDVD 08
I have anamorphic 16x9 QuickTime .MOV files I created from my Final Cut Pro project file. These do not appear as widescreen in a WS iDVD project. That started all of this.
I've created a new copy of the video using Anamorphicizer -- no luck
When I run idvd-ws-fix from terminal,
I created an image file from iDVD and mounted the image file as TEST_DVD. In terminal I ran the script:
/Applications/idvd-ws-fix-1.1/idvd-ws-fix --output=my-new-disc.img "/Volumes/TEST_DVD"
Copying VTS files to temporary directory.
/Applications/idvd-ws-fix-1.1/mkisofs: Warning: -follow-links does not always work correctly; be careful.
2.95% done, estimate finish Sat Jan 19 11:11:00 2008
5.90% done, estimate finish Sat Jan 19 11:10:43 2008
The script ran fine and created my-newl-disc.img in the applications folder where I had stored the script folder.
HOWEVER, when I mounted the new image and played it in the MAC DVD player, my anamorphic video was still crushed to 4x3. Very frustrating.
I then opened a .IFO file form the new image TS_VIDEOS directory in HexEdit. When I look at 00000200 all I see is a row of zeros.
Next, I mounted the image again and copied both TS directories into a test directory. I changed permissions in both AUDIO_TS and VIDEO_TS directories to read & write, apply to everything (requires your user password to confirm).
I opened the VVIDEO_TS directory in myDVDEdit. I edited: VMG Menu; VTS Menu 1; and VTS 1. In each case, using the VMG or VTS menu tab, I changed Aspect from Auto pan Pan&Scan Letterbox to 16x9 for both VMG Menu and VTS Menu; and from 4x3 to 16x9 for VTS 1. myDVDEdit stated that the video aspect ratio is not the sasme as the stream one. Do you want to correct the VOB files? I hit CORRECT.
When I opened the VIDEO_TS folder in DVD player, my anamorphic video finally played wide screen.
I ran this test again from a new disk image created from iDVD. I mounted the image, copied the TS directories in to a second test folder, changed permissions on both TS directories, then opened the new test directory in myDVDEdit. I made all the changes noted above and hit SAVE.
I opened the new test VIDEO_TS directory in DVD player and my anamorpohic video played wide screen.
I believe I had tried this before with no luck because I failed to change VTS 1 to 16x9.
Next I burned a DVD from the image file using Disk Utility.
When I played it with DVD player -- back to square one! The anamorpohic video played squished as 4x3. Did the same when I played it on my setup DVD player attached to a 4x3 crt TV.
I opened the VTS01O.IF, in HexEdit, scrolled down to 00000200 and found the first entry was 4F. I changed this to 4E and saved the file. Did the same for BTS010.BUP. I left the VIDEO_TS.IFO file set to 00
I then burned a new DVD. No luck.
Please add your findings to this thread. -
plaese answer this.
Hello princessgirly123,
Thanks for the question. I understand you are having issues with your iPod displaying a connect to iTunes graphic. I have included two resources (one for iPod touch, the other for all other models) that may provide assistance in troubleshooting this issue:
If you have an iPod touch:
Apple - Support - iPod touch - Restore Troubleshooting Assistant
http://www.apple.com/support/ipodtouch/assistant/restore/
If you have another iPod model:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks,
Matt M. -
I used to have at&t internet, dont know what this has to do with it but it's weird that as soon as I switched over to comcast internet my firefox completely stopped working -__- I try to open it and it loads but the page never comes up. Someone please help me, I dont want to lose my bookmarks and passwords..
Another way to start into Safe Mode is to hold the Shift key when double-clicking the Firefox icon.
If you have tried to start multiple times, you might have a frozen Firefox process in memory. To terminate that (I'm assuming Windows) open the Task Manager using Ctrl+Shift+Esc, click into the Processes tab, and look for firefox.exe. If you find it, highlight it and click End Process to kill it. Alternately, restarting Windows will clear it.
Any luck starting in Safe Mode?
Did you install any software from Comcast? -
My iphonte will not activate and i have plugged it into the computer and it still doesnt work
someone help?
Im pretty sure that its because there are millions of people doing this at the same time
Just give it some time and then try later.
Maybe you are looking for
-
Problem with getting current date and time using oracle.jbo.domain.Date
I`d like to get current date and time using oracle.jbo.domain.Date method getCurrentDate(), but it always return current date and 12:00:00. I also need to get the current time.
-
When I am using a chat client in Safari the input audio in my display is not recognized. The microphone works in other programs, I can record and be heard, etc., but never when I use it in Safari. Any help would be much appreciated!
-
How to display 2 level folder names in the application navigator?
We have our source code in the following structure. C:\somefolder\project\java\all_the_java_code_under_this_folder C:\somefolder\project\sample\java\all_the_sample_java_code_under_this_folder In the project content, I select C:\somefolder\project fol
-
Internet Explorer 7 Users Just Hangin'
My website created in Dreamweaver CS3 works fine in Internet Explorer 6. However, when users who have IE7 click the link to the home page of the site, it just "hangs" and never connects or displays the Home page. What is going on? Our server team say
-
Hi, i would like to access and query my cube. Is it possible to do it without building a view? Can I do it just using OLAP DML? Where can I find an example? thank you