HT4436 Just did a restore for a new 4S. I want to do a new iCloud account and discard the one that came with the restore. Any suggestions?
Just did a restore for a new 4S. I want to do a new iCloud account and discard the one that came with the restore. Any suggestions?
Welcome to the Apple community.
Settings > iCloud, scroll down and delete the account, sign back in by choosing the option to create a new Apple ID.
Similar Messages
-
When I plug my Ipad into a wall circut it will not fully charge, It only charges up to 66% does anyone no why?
I can't tell you why it is doing this but it should not take anywhere near that long to recharge.
Try another power adapter if you have access to one - borrow one from a friend, try another wall socket, another cable ... take it to an Apple Store and let them try to charge it for you.
You can try resetting the iPad and see if that helps but I have my doubts - but it will not hurt anything either.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Your battery gauge may be giving you an incorrect reading - but I think that would be a long shot as well. How many hours of use do you get at 66%?
You can read this about the iPad battery and how to maintain and care for the battery. .
http://www.apple.com/batteries/ipad.html
This copied from the site
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Message was edited by: Demo -
II'M a little confused on which cable I need for my car? I have the iphone5 and want to play my music in my car! Can someone please tell me which one to order??
Thanks!!
MaryThat would be this one.
http://store.apple.com/us/product/MD818ZM/A/lightning-to-usb-cable?fnode=45 -
I just purchased my first iPad (the new one) and a wireless keyboard. Is there a keyboard usage manual available anywhere that shows the functions of the keys? The info that came with the keyboard was very basic and my searches have been unsuccessful.
If you are using a Bluetooth keyboard on your iPad device, you should take advantage of the keyboard shortcuts for quicker access to copy, cut, paste, undo, redo, and other commands.
Command + C : Copy Selected Text
Command + V : Paste
Command + X: Cut Selected Text
Command + Z: Undo
Command + Shift + Z: Redo
Command + Delete: Delete everything to the left of the cursor on the current line
Option + Delete: Delete the word to the left of the cursor
Command + Up Arrow: Go to top of document
Command + Down Arrow: Go to bottom of document
Command + Left Arrow: Go to beginning of current line
Command + Right Arrow: Go to end of current line
F1: Dim screen
F2: Brighten screen
F7: Back one song
F8: Play/pause song
F9: Skip song
F10: Mute
F11: Decrease volume
F12: Increase volume
Eject button: Show or hide onscreen keyboard
Cheers, Tom -
Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid
Try a new post in the 10.5 Installation forum.
DALE -
I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even had upgraded to the Mavericks . I do not think it's fair to have to pay again and I would like to upgrade my operating system without having to pay again for the same system.
Hi anatuta,
Thanks for visiting Apple Support Communities.
It sounds like you are trying to upgrade your Mac to a newer version of OS X, after completing a fresh install of Snow Leopard.
If you have already purchased and downloaded OS X Lion and Mavericks, you should be able to find these items in the Purchased section of the Mac App Store.
You may find the steps in this article helpful with finding the items:
Mac App Store: Finding your purchased apps - Apple Support
If you do not see the items in the Purchased section, they may be hidden:
Hide and unhide purchases in the Mac App Store - Apple Support
All the best,
Jeremy -
Suddenly the apps I downloaded won't work. The screen "blinks" for a second as if the app is loading, and then returns to the home screen. All the apps that came with the iPod seem to be working fine. How to get them all working again?
First try a hard reset. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If still no luck, try downloading another free app from the App Store.
More troubleshooting here.
http://support.apple.com/kb/ts1702
Lastly, try to restore the iPod from a previous backup or restoring it to factory settings.
B-rock -
I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.
It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
The network password will appear in the box.
Quit Keychain Access. -
I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.
May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
http://www.logitech.com/en-us/support/gamepad-f310?crid=411
I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers. -
I want to clean the HDD back to as new but have lost the disks that came with the Macbook Any ideas please
You will need either the system DVD's that came with the MacBook or a retail Snow Leopard DVD...
....call Apple Customer Service to replace your original DVD's ( $ and a serial# required).....1-800-676-2775 -
What do you do if you have bought a used iPad and the apps won't update without the original id and password. Can't delete the apps that come with the iPad and reinstall them so what do I do?
Correct. An app can only be updated under the Apple ID that was used to orginally acquire the app. If that is a problem you can delete the app and download again under the new userid. If you paid for the app you will have to pay again. Your old Apple ID does not go away so there is no reason to not use it to download the apps.
You cannot delete the apps that came with IOS. If you want to "hide" the apps simply put the apps into an application folder by dragging one app onto another. You can do this to all the IOS apps. -
I purchased CS6 Design and Web Premium through the Department of Education Australia just over a year ago and now I can no longer access my software. It keeps asking me for my serial number, but when I enter the serial number that came with the product it tells me it is invalid???
Check with the school to make sure the licensing should still be valid. Some school make arrangements only for temporary licensing.
You can also try checking with Adobe Support thru chat.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
i plugged in my 18 month old iPhone to charge it, using the cable that came with it and that I have used regularly all along. I got a warning on my phone screen saying the cable is not certified and may not work properly with my iPhone. Why?
If you updated iPhone to iOS7, it now checks for real Apple Lightning Cable. Your cable may not be Apple, or someone swapped another cable with yours. Make sure the cable end is clean, take a clean dry toothbrush and carefully clean charging port on the iPhone.
-
How do I separate the iPad's own generic calendar app from a calendar app I purchased, so that the entries I put into the new app don't cross over to the generic app? Also, whenever changing over to a new calendar app, is it always possible to transfer all data from the old to the new or is there a limit on quantity or time frame ever? Does it depend on the app?
Cloning And Backup Tools
A bootable clone is an exact copy of your drive which is capable of booting your computer. Making a copy of your computer which is capable of actually starting the computer requires special copying procedures. Some people just back up data files but if you have problems you have to reinstall all your operating system and all your applications. With a bootable clone you just start up from the backup drive and clone back everything.
To copy files from one hard drive to another hard drive you can use:
[CarbonCopy Cloner|http://www.bombich.com/software/ccc.html] (donationware)
[SuperDuper|http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html] (shareware)
[IBackup|http://www.grapefruit.ch/iBackup/index.html] (free)
The Restore function of Disk Utility included in OS X. [Kappy's directions|http://discussions.apple.com/message.jspa?messageID=8799711#8799711]
[Tri-Backup (commercial)|http://www.tri-edre.com/english/tribackup.html] (payware)
[Silverkeeper|http://www.lacie.com/silverkeeper> (free) - version 2 has some issues (references: [1|http://www.macintouch.com/readerreports/backup/index.html#d12jan2009],
[2|http://www.macintouch.com/readerreports/backup/index.html#d13jan2009]) and it is recommended Tiger users stick with 1.1.4.
[Kappy's Backup Software Recommendations|http://discussions.apple.com/message.jspa?messageID=9065665#906 5665]
[Overview of Mac OS X Backup Programs|http://8help.osu.edu/1247.html] -
I just purchase an iMac and an HP LaserJet M1217nfw printer. I could not install with the installation disk that was furnished by HP. This is my first Mac product and I'm just not sure what I'm doing...help! I don't know if it's a mountain lion, a tiger, or a dog! The box says OS X. I really need help. Thanks for your time.
What Mac operating system are you running on your iMac?
Are you certain they're compatible?
Have you checked with HP to see if there's a newer driver?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4 075472
In addition, I haven't loaded on any software with my last 3 printers. They just work without them, IMHO.
But a current driver would be necessary.
Maybe you are looking for
-
File to IDoc Scenario: Idoc Status 50
Hello, I have a problem in doing a File to IDoc Scenario with a simple XML file mapped to IDoc "CREMAS.CREMAS03". In the beginning, I got a status 56:"IDoc with errors added". Then I added a logical system (LS name of my sender)manually in "Display
-
Can I force Quicktime to remain in fullscreen when it's out of focus
Hey, I've got a bit of a question. I recently got hold of a new LCD and hooked it up as my secondary display, and among other things, I like to keep work on one screen and video on the other. Trouble is, any time Quicktime loses focus, it drops back
-
Decoding Run Length Encoded String
I have a class that reads data from a server using a BufferedReader. The data is read into a char[]. This data has been Run Length Encoded by a seperate process. I loop through the char[] looking for a sentinal value. Once this value is found, I look
-
How to create a DLL for LabVIEW in MatLab
I want to use MatLab-Code from an M-file in LabView without MatLab. So i decide to use external code in a DLL. Can anybody give me some hints - how to do? (How to create, how to use?) Used System Windows 98, LabVIEW 6.1, MatLab 6.1 R12.1 Thanks
-
Desktop software links and menu does not work
Hi, i have a blackberry bold 9000 and installed the latest desktop software 4.6 from the blackberry website. my device manager says connected. but if i start desktop manager, i don't see the main header menu (there is just nothing, where the text men