HT4437 I'm using an ATV2 and an ipad successfully for with airplay. Now I added a brand new ipod touch to the setup. However, for some reason airplay for music doesn't work if my projector connected via HDMI2DVI connector is turned off.

If I turn on the projector it works fine. Interesting fact is, that this is exactly the same behavior that I have when playing videos from the iPad. Worth to mention is that the ATV2 is connected to the speakers via optical cabIe. Is there a setting that I'm missing? I can't imagine that Airplay for music from the iPod requires a turned on Video device connected to the ATV2. Thanks.

Hy Alley_Cat, that was the last bit on information that I wanted to add to the question. All devices say they are up to date. Which means that iPad and iPod run 5.0.1 and ATV 2 4.4.4(3330).

Similar Messages

I have a brand new ipod touch and it wont connect to itunes or my computer!!??

I have a brand new ipod touch however when I connect it to my computer, itunes does not recognise it and neither does my computer. The drivers have downloaded and are showing working. I have tried uninstalling and re-installing itunes as discussed in support centre however nothing seems to work. The ipod itself just has the connect to the computer on the screen, is fully charged and when plugged in a little lock sign comes up for a second or two above the itunes icon!!! Let me know if you have any further suggestions please.

Thanx for you suggestions, I used my old xp laptop...update software and my ipod connected however the memory is not large enough to hold my itunes library so I could see it was not the cable or the ipod at fault.
I have tried to connect to my vista laptop again and have tried all of the suggestions in troubleshooting again...I have even upgraded to windows 7 to see if that cleared the problem....and....my computer has located my ipod but is only recognising it as a digital camera so back to the drawing board...
Please have you any other suggestions???

HT1212 my daughter has a brand new ipod touch - never used - she entered a passcode then immediately forgot it and now she has tried to enter one too many times and ipod is locked for 1 hour - she has never synced with itunes HELP

my daughter has a brand new ipod touch - latest one - she started to input a passcode then didn't finish the process then turned off ipod. she turned it back on and it is asking for a passcode - she doesn't remember what she typed. Ipod is now disabled for one hour. Can we override the disable. How do we reset passcode when we don't klnow the original. It has never been synced to Itunes. I am completely lost.

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup. If you do not have a
          backup to restore, then restore as New.

I have just recieved a brand new ipod touch 8GB, it wont turn on and it wont either charge or recognise connection through ITunes. I have tried the hold down home and the power button together but no luck. Its absolutely dead, any ideas please ????

I have just received a brand new IPOD Touch ,it will not turn on, i have connected it to my cmputer, it does not show that its charging and is not recognised in Itunes. I have tried the holding down the power and home buttons which also didnt work. Any Ideas Please ????

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT1918 I cannot access files I uploaded from an old computer. The email account to which some tracks are connected is deleted. For some reason my birth date doesn't work either. Is there some way to transfer the files to my current address?

I cannot access files I uploaded from an old computer. The email account to which some tracks are connected is deleted. For some reason my birth date doesn't work either. Is there some way to transfer the files to my current address and username?

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

The app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new.

the app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new for christmas.

See the following to purchase earlier, compatible version for iOS 6
App Store: Downloading Older Versions of Apps on iOS - Apple Club

My brand-new iPod touch (5th Gen) battery takes a very long time to fully charge, even while not in use. Why is this and what should I do?

Just recently bought a brand-new iPod touch, 5th generation. To be exact, got it two days ago, this past Saturday, on 12/13/2014. Initially, when I first turned it on, it had a fully charge and I didn't need to charge it. I also didn't see anything in the very small and limited start-up guide you receive with it to charge it for a certain amount of time before use, or to use it until the battery dies, then charge all the way, like a lot of electronic devices have you do when you first purchase them.
So I was assuming I didn't need to do anything like that. First question, should I have charged it for a period of time before use? Should I have used it until the battery died, then plugged it in and charged it fully before use? Or is none of this necessary initially and iPod batteries are good to go from the start?
Please excuse me if this is an obvious question, as this is my first ever iPod. Anyways,like I said, nothing in the "instructions" said anything about that, so I didn't do it, I just used it until it got below 20% battery left, then I plugged it in.
Now for the battery itself, it takes literally a day or so to fully charge, even while not in use. Even if I use it for a while, turn off the iPod to make sure it shuts off all background data and apps, and then plug it in to charge, it still charges extremely slowly. I've never seen a device take this long to charge. As for the battery life itself, I'd say at full charge it lasts about 4-5 hrs, maybe 6, and then I have to charge it again. Meanwhile it takes around 24 hours, without me using it, to fully charge. If I use it while its charging, the battery decreases faster than it charges, and eventually I'll get the typical "20% battery remaining" message pop up.
I know it is charging, as the lightning symbol is next to the battery symbol. Specifically, right now, I plugged it in about 1 hr 30 minutes ago, and it has barely gone up. Also, whenever I press the home button to check the battery, I can see it jump down from about 50% to somewhere around 25%-30%. What is that about?
This is really frustrating, and I'm seriously contemplating either taking it back and trying my luck with a different iPod, or just taking it back and getting my money back. Any help and clarification on this matter would be greatly appreciated, and I'll answer any questions I can to shed more light on this.

It will take longer to charge the 5G's battery than either the 3G or 4G's battery.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source like a computer's USB port
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Itunes asks to update my brand new ipod touch.. I do and now it wont work at all!!!

just got my brand new ipod touch ... working good then itunes wants to update so I do now my ipod doesnt work at all! all I get is the apple and a line on face and wont even turn off!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Brand New Ipod touch can't connect to windows.

I bought a brand new ipod touch today and when I connected it to my laptop windows comes up with a message saying that the usb device is not recognised. I have the latest update for itunes and all of the correct drivers are installed. I have tried resetting the iPod but nothing works. Anyone got any ideas? I'm running vista if this makes any difference.

A Vista
B Apple services are not well tuned for Windows
C USB ports on some computers (don't use a hub, use direct to MB connections)
iOS Device not recognized in iTunes for Windows
iPhone, iPad, iPod touch How to restart the Apple Mobile Device Service (AMDS) on Windows
I have to go into Services with iTunes closed, and restart the three Apple items, Apple Mobile, Bonjour, iPod.
Safari 5.1 Apple Common software support 2.x also seemed to muck around a bit. All Apple software leaves behind reinstall caches of all verions too.
AppData - clean out so that starts fresh
Upgrade to 7 SP1. (I assume you are on SP2+ now for Vista)

Brand new ipod touch not working like it should??

I have a brand new ipod touch that i got last tuesday.and every downloaded app will stop working after i have had it for about a day..like it starts to load the app then just goes back to homescreen..all pre-installed apps work fine.
but i have tryed restoring my ipod and it doesnt really fix it because all the apps stop working just like before..and i have also tryed deleting and re-installing the apps but is still doing the same thing.
Is there a way to fix this or should i get it replaced??
(i have a 2 year warrenty)

Maybe your using too much Virtual Memory. Try holding the sleep/wake button and the home button until you see the silver apple.

The head phone jack on my brand new iPod touch 5th generation is not working properly

The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

I have a brand new Ipod touch and it will not sync.

I have a brand new ipod touch and I cannot get it to synch with my itunes. I have two other Ipod Nano's that will synch up just fine. The computer has windows XP with the latest service pack on it. It does not recognize it as a device in windows, but sees my other two ipods. I have the latest itunes software on it. I even uninstalled it and reinstalled per the apple web site. I connected the ipod touch to another cpmputer and the usb port sees it as a device just fine. What do I need to do to this thing to get this computer to see it?

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
The iOS devices use differnt drivers than a Nano and other simple iPods

Brand new ipod Touch (8GB) does not work with DHCP

I have a brand new iPod Touch (8GB) that will not work using DHCP. No matter what I do (reset router, reset ipod) the DHCP still doesn't work. I can manually setup an IP/Gateway/netmask/etc. and it works but I really need the DHCP to work if at all possible. I'm using a Linksys WRT54G. I was able to use an old Linksys wireless router and the touch gets an IP, etc. with no problems but I can not get my Touch to work with the WRT54G. Any ideas?

its possible to have a bad power supply that has too much AC ripple on the output which can make the screen do weird things
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

HT201442 Just bought a brand new ipod touch a month ago and went in to iTunes. There was an update for me so I downloaded it to my ipod and then it went into recovery mode. Tried to restore it in itunes but was told this device isn't eligible. Help!!

Just bought a new ipod touch a month ago. Went into itunes to burn music and had an update to download which I did. Then I get a message that my ipod has gone into recovery mode. It's locked up with a black screen with iTunes logo and picture of a plugin on the screen. Tried to restore it as recommended but itunes said this device isn't eligible for the requested build. Error codes 3194 and 17. This is very frustrating considering the cost of the ipod and how new it is. Now what do I do? Buy another one? Can anybody fix these types of things? Is this a common occurance or am I just unlucky?

Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Then...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Brand new ipod touch screen not working properly

My sons brand new ipod touch 32gb (well bought april 14) only occasionally will respond to the touch sceen, and when he does get into it the next screens dont work properly. Any suggestions?

Try #2 and 3 in link below. If neither help, it's most likely a hardware issue then. Contact Apple and get it serviced.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

HT4437 I'm using an ATV2 and an ipad successfully for with airplay. Now I added a brand new ipod touch to the setup. However, for some reason airplay for music doesn't work if my projector connected via HDMI2DVI connector is turned off.

Similar Messages

Maybe you are looking for