HT4527 the new computer does not see the media library, nor does it recognize my playlists and settings.

The new computer is authorized and if I go to the medial library and double click on a song it launches, however itunes does not see my tunes or show my playlists

Follow the steps given here
https://discussions.apple.com/docs/DOC-3141

Similar Messages

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem)

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks

sgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for.

Wiped our old iPad 1 clean, now can't install iOS from iTunes. iTunes does not "see" the devise. Tried uninstalling and installing iTunes on laptop. Also bought new USB cable. The iPad is charging, but that's all it does.

Wiped our old iPad 1 clean, now can't install iOS from iTunes using laptop PC (W Vista). iTunes does not "see" the device. Tried uninstalling and installing iTunes on laptop. Also bought new USB cable. The iPad is charging, but that's all it does. Just want to get it operating again for browsing and e-reading.

OK. You merely erased the content and settings. The IOS is still there.
If it has NEVER been jailbroke, here are some standard repair procedures. From what you've already stated, my guess is that you'll end up with Recovery Mode described in the last paragraph.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

My iMac does not see the new Toshiba external drive in Finder or Disk Utility. How can I get it to see the drive?

My iMac does not see the new Toshiba external drive in Finder or Disk Utility. How can I get it to see the drive?

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive is malfunctioning.

I bought Ebey NEW Boxed (NEVER OPENED) 16GB Black Iphone 5 Virgin Mobile (USA) NO CONTRACT, want to use it in Europe, particularly in Ukraine, but for some reason now my phone does not see the Ukrainian GSM sim card.

I bought Ebey NEW Boxed (NEVER OPENED) 16GB Black Iphone 5 Virgin Mobile (USA) NO CONTRACT, want to use it in Europe, particularly in Ukraine, but for some reason now my phone does not see the Ukrainian GSM sim card. Please help to solve this problem.

Return it and get your money back. Virgin does not offer official unlocking, thus there's no way to get the phone officially unlocked for you to use it.
Sorry, but you wasted your money.

I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.

I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.
Here is the information I have. The external hard drive is a 120GB Acomdata. It has both USB and Firewire. When I go to plug in to the mac mini through USB, it is not being recognized. When I switch to Firewire on the old computer I can see it, however when I go to USB it is not being recognized (even on the old computer).
I'm at a loss as to what to do. Any advice would be helpful.

Shalese wrote:
Have you ever tried the FW 400 to 800 adapter?
I have used them on multiple occasions and they work just fine.
Try this (maybe you already have):
-Boot Mini with drive disconnected.
-Do not connect drive but turn it on
-wait a few seconds for drive to spin up
-plug cable into the Mini then into drive.
This is an old drive and may have some timing
issues.
I had an Acomdata drive a long time ago. It
worked fine with FW but USB was flakey.

HT1329 I just downloaded iTunes to a new computer. It's been a while since I used iTunes on my old computer. I don't see any of my playlists on the new computer. What is the easiest way to transfer my playlists without having to recreate each one?

I just downloaded iTunes to a new computer. It's been a while since I used iTunes on my old computer, so the new one has a totally different user interface. I signed on to my account and saw my music but I have no playlists on the new computer. What's the easiest way to replicate or restore my playlists as I had them in the old computer and in my iPod?

OK, thanks for the response. I'm copying it onto a memory stick to transfer it to the new computer. Still have two questions:
1. Since there is already an iTunes folder on the new computer, created when iTunes was downloaded, where exactly do I copy the old folder onto the computer so that iTunes can find it? In the old interface, there used to be a field where one could designate the path to find music and I don't see that in the new interface.
Assuming the above takes care of putting my playlists onto the new computer...
2. How do I add music that is currently stored in a back up file but was not on my old computer's drive? I'm worried that I would have to add these one by one somehow, and there are a lot of songs.
Thanks again.

I copied my itunes library via an external hard drive. now when i connect my ipod to the new computer i can see my music but my apps are disabled

i copied my itunes library via an external hard drive. now when i connect
my ipod to the new computer i can see my music but my apps are disabled

Here are the official Apple Support instructions:
http://support.apple.com/kb/HT4527
Ciao.

IPhoto does not see the camera

iPhoto does not see the camera, although it worked really well for two years. Computer has been regularly updated. Please help, thank You.

Image Capture doesn't see the camera. I have tried with two different Sony cameras, that I have been using for a long time on this computer. It is iMac 27''. Both of these cameras work normaly in MacBook Air, that means that the problem is not in the camera, or the cards. Those are the things I have tried so far. Only difference I created on the computer is that I have, two or three days ago, installed external hard drive WD My Book Studio which is connected to the computer by FireWire 800.

TS2662 I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac, but it does not see the numeric pad. Any advice?

I am trying to connect a wireless keyboard with a numeric pad to my (recent) iMac running Mountain Lion. I followed all recommendations in article http://support.apple.com/kb/TS3048#1. My computer recognises the alpha part, but it does not see the numeric pad. Any advice?

Hello:
I would try resetting the PRAM and SMC.
Barry

My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless i select the list in the sub file. How do I get backto the old method of seeing and using iTunes??

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless I select the list in the sub file. How do I get back to the old method of seeing and using iTunes??

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

Audition CC does not see the CD in the drive when I try to burn

Audition CC does not see the CD in the drive when I try to burn CD - says no media found
Windows 8 sees it OK

What folders are you talking about? Photos folders? Email folders?

I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand.

I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand, thanks.

What edition of LR 5? What edition of ACR does PSCS 6 contain. If they are not parallel (same edition number x in [5 or 8].x ), is LR making a tiff or psd rendition of the image?

I am trying to update my iphone 3GS software but itunes just says that this is the current version of itunes, it does not see the phone update - anyone know how to get the phone updated?

I am trying to update my iphone 3GS software but itunes just says that this is the current version of itunes, it does not see the phone update - anyone know how to get the phone updated?

Mike
I have done that and it is through pressing that update, which tells me that there is anew version of iphone software, that the prompt comes telling me that this is the current itunes?

HT4527 the new computer does not see the media library, nor does it recognize my playlists and settings.

Similar Messages

Maybe you are looking for