HT4528 My iPhone 5 does not connect to my bluetooth headset
My iPhone 5 does not find my bluetooth headset. I have my bluetooth setting ON and the headset right next to the iPhone.
First you say both paired, then you cannot pair them. Were they ever paired together, or do you mean they both paired with something else?
If the headset shows in the list of bluetooth devices on the phone, remove it and reset the phone by holding the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, put the headset in pairing/discovery mode. The turn on bluetooth on the phone. See if they link then.
See this support document about bluetooth pairing. http://support.apple.com/kb/HT1664
Similar Messages
-
HT4972 The Wi-fi on my iPhone 4 does not connect to my home network or other networks
The Wi-fi on my iPhone 4 does not connect to my home network or other networks that I have used in the past. I noticed this after I updated to version 6. I have tried to reset network settings ;turn off and on wi-fi; reset home network and it's still not working. Is there a fix for this problem?
Try resetting your network settings. Go to General\Reset\Reset Netork Settings. Sometimes this will fix things. If not, what type of router do you have, what network are you running (B, G, N, etc.).,
Good luck! -
Since upgrading to iOS 6 my iPhone now does not connect to my 2013 elantras Bluetooth set up where as with the previous version of iOS it connected seamlessly. Please let me know if you have any solutions. Thanks
Have you checked to see if Elentra has a firmware update since the new iOS release?
-
when i am out of wi fi area (disconnected), my iPhone 5S does not connect to cellular. Everytime i need to manually do the setting.
Hello, Arkh_tyi.
Thank you for visiting Apple Support Communities.
Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting regarding iOS device connection. The second article cover the recommended settings for current Wi-Fi access points.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H. -
MY IPHONE 5 does not connect with 3g only wifi
MY IPHONE 5 does not connect with 3g only wifi
Has it ever connected to 3g?
If this is a recent problem perhaps you've reached your Mb limit: if it never has connected are you sure you're paying your carrier for cellular Internet. -
Apple iPhone 4 does not connect to home wifi
Can someone help? We had a new home wifi and my iPhone 4 does not connects and
Shows a message "unable to connect" when I enter password of wifi. Any way it
Shows my home wifi available. I tried reset all setting but it is still not working.
Anyway my iPhone have iOS 6:3:1.Here's a great troubleshooting article for you:
http://support.apple.com/kb/TS1398 -
My iPhone sometimes does not connect to 3g
my iphone sometimes does not connect to 3g. sometimes safari and everything that does need wifi goes down sometimes only the games that need wifi dont work HELP what do i do
are you located in a place with poor 3g cover when it happens?
-
My iphone 4 doesn not connect with charger and mac book. however it does charges when it is powered off and connected with charger. Any clue ?
I hope you are having a great and sorry to learn that you are having this issue;
Since I could not check what version of the laterst firmware, I hope you don't mind doing the following in your printer:
Updating the All-in-OneFollow these steps to enable automated Web Services updates, and to update the product firmware.
Important : The HP product must connect to a wireless network with an active Internet connection to receive updates. However, the product does not need to be connected to a computer.
On the upper left side of the HP product control panel, touch the Web Services icon ( ). The product control panel displays the Web Services screen.
Touch Settings . The product control panel displays the Settings menu.
Touch Product Updates .
Touch Check for Product Updates Now .
Wait for any updates to download and run.
If you using Win XP or later please run this tool to see if you get any errrors Click here
Is your printer on warranty? if you do not know you can use this tool; GO HERE.
Hope this helps and let me know if I can assist you any further I will do my best to provide you assistance;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance! -
Ich still shows the 3G symbol but I cant connect to the internet anymore. Since ios 5.1 it disconnected every 30 minutes untill i restarted. De- and reactivating the mobile internet never helped. Now i dont get a connection. It quite not works.
I never had problems untill ios 5.1
of course apn, username and passwort for the carrier are correct.
My carrier is simyo
(im in germany)
Thank you for helping meHi Damien,
Thanks for your reply.
I had not created 2 separated wireless network. The airport extreme has had create wireless allowing it to be extended and the airport express has had it to extend since day 1.
The only device that does not connect to the airport express when it is far from the airport extreme here is the iPhone 4. I've tested 2 Windows based computers, 2 Macs, 1 Samsung TV and 1 Android phone and they all are able to connect to the airport express when the signal from the airport extreme is weak (please take a look on the screen shots on the original post).
The screenshots of the 2 devices' wireless set up can be found below:
Airport Extreme
Airport Express
I have seen other people here on the Apple discussions complaining about the same issue with their iPhone 4 and iPad: would it be a iOs problem?
Regards
Gilson -
TS1398 iPhone 4 does not connect automatically and does not remember wifi password
After being idle for a while, my iPhone 4 goes off wifi and when I am connecting manully, the phone does not remember the wifi password. I have a iPhone 3 and 5 where this is not a problem. Can this be linkes to the phone company you use? The iPhone 4 has a different phone company than the other phones. Can anyone help please?
Hi Damien,
Thanks for your reply.
I had not created 2 separated wireless network. The airport extreme has had create wireless allowing it to be extended and the airport express has had it to extend since day 1.
The only device that does not connect to the airport express when it is far from the airport extreme here is the iPhone 4. I've tested 2 Windows based computers, 2 Macs, 1 Samsung TV and 1 Android phone and they all are able to connect to the airport express when the signal from the airport extreme is weak (please take a look on the screen shots on the original post).
The screenshots of the 2 devices' wireless set up can be found below:
Airport Extreme
Airport Express
I have seen other people here on the Apple discussions complaining about the same issue with their iPhone 4 and iPad: would it be a iOs problem?
Regards
Gilson -
My iPhone 4s will not connect to any Bluetooth including car its turned on but cannot find anything
My iPhone 4s will not connect to anybluetooth tooth including car .its on and renamed ??
Apple devices cannot connect to all bluetooth enabled headsets.
You may need to buy a headset that specifically details that it is compatible with Apple products. For example the headset I use for my PS3 is not compatible with my iPhone. -
I replaced both of my iPhone 4S/7.x with iPhone 5S/7.x and neither was qable to connect to any WiFi unless I was within 20' of the WiFi router. So I took both to the Apple store and they replaced both iPhone 5S.
Now one works perfectly, however the other does not. I went to the Apple store again, and they replaced the replacement iPhone 5S with another 5S. Same problem.
I went back to the Apple store again and they replaced replacement #2 with another replacement, so this is the 3rd time! They recommended I take the replacement iPhone 5S and not restore,but start as a new iPhone. Before I did anything, I checked to see if the WiFi worked "out of the box"....it did not!! Thus, there wasn't any reason to do a new install, since it did not appear to be my software load.
By the way, all 3 of my MacBook Pro's and iPad work perfectly over WiFi.
Also, all my iPhones and iPad are on v 7.04
It doesn't appear to make sense to go back to the Apple store Genius Bar, as it appears all of their stock have this issue.
Any helpful suggestions would be appreciatedI replaced both of my iPhone 4S/7.x with iPhone 5S/7.x and neither was qable to connect to any WiFi unless I was within 20' of the WiFi router. So I took both to the Apple store and they replaced both iPhone 5S.
Now one works perfectly, however the other does not. I went to the Apple store again, and they replaced the replacement iPhone 5S with another 5S. Same problem.
I went back to the Apple store again and they replaced replacement #2 with another replacement, so this is the 3rd time! They recommended I take the replacement iPhone 5S and not restore,but start as a new iPhone. Before I did anything, I checked to see if the WiFi worked "out of the box"....it did not!! Thus, there wasn't any reason to do a new install, since it did not appear to be my software load.
By the way, all 3 of my MacBook Pro's and iPad work perfectly over WiFi.
Also, all my iPhones and iPad are on v 7.04
It doesn't appear to make sense to go back to the Apple store Genius Bar, as it appears all of their stock have this issue.
Any helpful suggestions would be appreciated -
Iphone 4 does not connect to itunes
anyone knows solution, my iphone does not appear on the itunes, reloaded everything twice, nothing... help
The following may help:
Windows computer: http://support.apple.com/kb/TS1538
Mac computer: http://support.apple.com/kb/TS1591 -
Iphone 5 does not connect to Wifi.
My Iphone will not connect to Wifi. My Macbook connects fine. I entered the password correctly, followed all the suggested steps, i.e. Forget this network and Reset the settings but nothing works. It worked for a bit, after I closed the page it failed to log back in.
I tried talking to Apple Support, they basically guided me through to restoring my phone as new backing all my data on my computer. Didn't work.
I didn't think to ask about this but it seemed like I wasn't the only person that came across this issue. It was working fine for me this morning at another wifi setup as home but now it is not. -
I have restarted my phone, uninstalled and reinstalled itunes to see if that was the problem, but it did not work. I want to know what else I can do to make them connect, my phone 4S does not even appear as a device on itunes.
Hello titicas,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Have a nice day,
Mario
Maybe you are looking for
-
How to find out who had deleted the function moldule? S O S
how to find out who had deleted the function moldule Thank you very much.
-
How to handle images stored /outside/ Aperture
I am coming from a PC environment where my images were stored all over my hard drive in various folders and subfolders. I am part-way through organizing all of this in Aperture but I OFTEN find myself exporting images to folders on my desktop in orde
-
Difficulties replacing some BC functionality with XI (refer to example)
<b>Difficulties replacing some BC functionality with XI (refer to example)</b> I am transferring all interface processing from BC to XI and am having difficulties replacing some of the current BC functionality. Please refer to my example below <b>Cu
-
Hello, We have just upgraded from 4.6c to ECC6. In several programs we used Import method with the following syntax in 4.6c: import (tname) to &1 from database zzhilan(zz) id zkey1(16) . However in ECC6 , since it didn't compile we changed it to :
-
Provision offline files in Windows 8.x
Hi there, I stumbled across a problem. I want to make certain folders offline available for all users. For this I am using the Group Policy setting "Administratively assigned offline files" under "Administrative Templates / Network / Offline Files".