HT4589 final cut pro x 10.0.6 and 10.0.7 Bugs with neat video

In Final cut pro x 10.0.6 and 10.0.7 (unlike 10.0.5) have a bug, which produces corrupted frames (incorrect colors,inverted,mirrored,uppside down...etc.) when certain types of plug-ins are used. one of them that i have bye is neat video. If you think of bye final cut pro x, dont bye it!!! Stay away from it because it has TO MUCH BUG!!! What was apple thinking (Sorry they dont think) when they uppgrade from FCPX 10.0.5 to 10.0.6 and then to 10.0.7 without fix the bug???

I did so but it did not change things. I checked fpr disc issues and found error and repaired the disk, but that also did not work. I think my issues is not enough ram, I'm only have 2G ram. Final cut did not do this initially but yet I have sevearl spots or projects now total 6 but thay are all short videos. surely 2G would let you edit sevearl short videos. There is not a full length motion picture on it, but soon will be if I can get the final cut to work properly. I did get rid of a lot of videos butr thern again it maybe because I have my hard drive partitioned due to error in harddrive. but sense I repaired onle the partition that the final cut was on. Perhaps I should repair the other partition yet it only has storage of videos etc. I'm kinda lost unless maybe I get all new hard disc and use an external drive. I see issues aboutr Final cut a lotr on interrnet, what up with that, maybe I need something larger then an Imac with a heck of a lot disc space and RAM RAM RAM. u can reply here or to [email protected]

Similar Messages

  • I just updated to new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. when it comes back to tcp x it's black.

    I just updated to the new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. When i send a sample to MBL and color grade it , it comes back to final cut pro x all black even after render. By the way on the MBL i am using the GPU rendering, I used before like 4months ago and it was fine. And i don't like to use the CPU because it very slow.

    What is the frame rate of the project? At what frame rate was the media recorded? What frame size?
    What are the audio settings?
    What are the specs of the machine, in particular how much RAM, how is the hard drive connected, etc.?
    If possible, post screenshots of the inspector for the project.
    It could be related to the audio frequency?

  • I just purchased Final Cut Pro from the App Store and it will not download to my computer.  I try and install it from my purchases file but nothing happens.  Any suggestions?

    I just purchased Final Cut Pro from the App Store and it will not download to my computer.  I try and install it from my purchases file but nothing happens.  Any suggestions?

    If it's in the purchased page and doesn't download, you should contact Apple.

  • After editing in lightroom, i transferred the photo to final cut pro. However the photo that shows in final cut pro is the unedited version and a bit blurry. Any ideas?

    after editing in lightroom, i transferred the photo to final cut pro. However the photo that shows in final cut pro is the unedited version and a bit blurry. Any ideas?

    IIs there an export function from Lightroom? Did you export? Does the exported file contain your edit?
    THe hard drive file size doesn't matter. What matters is the image size, it's dimensions in pixels.
    IN FCP press Cmd-J to see the project properties.

  • I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.'  Where exactly is it located?

    I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.'  Where exactly is it located?  Here is the link which gives the instructions but doesn't seem to say where the 'Modify Settings Button' is located: http://support.apple.com/kb/PH12526?viewlocale=en_US

    You have to choose – one settigf or another.
    The thing is.your HD clips will look better in an SD project than your SD clips will in an HD project.
    WIthout knowing much more about your project and the kind of content, it's really hard to be specific. But generally I'd let my project settings be guided by what fraction of my timeline will be made up of HD clips and how much SD clips. If it's 75% HD, I'd probably do an HD project…and so on,
    Good luck.
    Russ

  • FINAL CUT PRO X (the latest version). I'm trying to upload my video to Youtube, I am getting flashing and orange bar in the frame timeline. How to make it STOP!?

    FINAL CUT PRO X (the latest version). I'm trying to upload my video to Youtube, I am getting flashing and orange bar in the frame timeline. How to make it STOP!? It looks like it's rendering somthng but I just want it to stop flashing. I hope it didn't mess up the video...

    You're in totally the wrong place...  this is the Mac Pro (no Book) forum for hardware.  You want
    Final Cut Pro X: Professional Applications: Apple Support Communities
    Hopefully, FCP X has an autosave feature Like Final Cut Pro Studio so that you may already have a recent copy.  If I were in your shoes, I'd try an ESC or something similar before going to a Forced Quit.
    Good luck

  • Final Cut Pro Studio 5.1.1 and Final Cut Express HD 3.5

    Hi,
    I have a client with both of these installed on the same machine (running 10.4.6).
    When they try and launch either application, the splash screen comes up, loading various filters, etc. then they get an error message:
    "File Error: A file of this name already exists" "OK"
    Clicking "OK" closes the app.
    Any idea:
    1. What the file in question is?
    2. Can it be deleted to let the app run?
    3. Can Final Cut Pro Studio 5.1.1 and Final Cut Express HD 3.5 be used on the same machine?
    I'll post this on the Final Cut Express HD 3.5 thread too (but with the order reversed).

    What you did was not enough to delete the preferences properly.
    This article tells you how. It is for FCE2 but works the same for FCE3 so I assume it is also OK for FCE 3.5:-
    http://docs.info.apple.com/article.html?artnum=93690
    It's simple to do so try it before reinstalling etc. - You should completely uninstall before reinstalling:-
    http://docs.info.apple.com/article.html?artnum=301182
    Ian.

  • I am thing of using Final Cut Pro but when I try and download I get the message "Your computer's video card does not meet the minimum system requirements." Can I do anything about this?

    I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.

    Geoff2T wrote:
    I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.
    It is just as the message says. Your video card is not compatible.
    You can add a compatible graphics card and use FCP X with your mac.  I can't suggest which one, but maybe other people on this forum can guide.
    And you may also get good suggestions in the Mac Pro forum.

  • HT4589 Final Cut Pro wont launch anymore

    I updated to the latest version of Final Cut Pro and now it wont launch.  the window comes up and all I get is a spinning colourful wheel as a cursor and no way to operate the software.

    Could be a problem within one or more of your Events or Projects.
    Move your Events and Projects to new (temporary) folders so that FCP X doesn't find them on launch.
    If it launches OK, then quit the app and move the Projects back one by one (re-launching each time). The media will be offline (red clips) but if it launches OK, quit again, and move the Events back one by one - re-launching each time you move an Event.
    This should isolate the offending Event - you can then use a similar technique to track down the individual file.
    Andy

  • Hi, i've made a video in final cut pro, the problem is that when i export it not the entire video is played, just the first 3 seconds

    i made a video in final cut pro x. The entire thing isn't that long, however when it comes to sharing it only the very first few seconds are playe.
    Thanks,
    Jamie

    see where the clip ends and then the timeline becomes black? when i add on an extra clip that line thing with the arrow does not move and if i try to export the video not all of it is played, just till that arrow.

  • I have a fairly new iMac wI now have iMovie events and Final Cut pro events that are duplicates.  Does that mean that all my video is copied onto my hard dive twice?

    If I have video in imovie and final cut pro X, does that mean there are two copies of the video, one for each piece of SW?  If so, how do I get rid of the imovie events and keep only the Final Cut Pro X events (video)?  I don't want multiple copies of the same video stored on the hard drive.

    If you import to FCP directly from the Camera or from a camera archive, you would likely import choosing Optimized Files which would go to a FCP event that is in ProRes 422 codec. This would be in addition to your iMovie Event which would import using the Apple Intermediate Codec. So you would have two copies of the same information. An AIC copy and a larger ProRes copy.
    However, if you use FILE/IMPORT/iMOVIE EVENT LIBRARY, FCP will not duplicate the event files from iMovie. It will treat them as referenced files, and will point to the iMovie Event files in the reference. So there is no duplication. You will be editing Apple Intermediate Codec files in FCP.
    However, FCP will create Event folders. In addition to the reference information, these will contain thumbnail files that are compatible with FCP, stabilization and analysis files that are compatible with FCP, as well as any intermediate render files that are associated with the Event.
    So in this case, there is no duplication of the large event files, but there is some duplication of the small thumbnail files.
    I have several terabytes of iMovie Events, which are now all available in FCP. Believe me, I would know if they were duplicated because all my disks would be full.

  • SOS my final cut pro x window is grey and nothing happens

    When I turn on my fcpx it seems it loads all events etc...and when it finish loading the frame is grey...no browser...no libraryes..
    please,
    I need help
    I'm working for a TV channel anb I'm really upset with this (kind of beta) program
    SOS

    salvaLosAngeles wrote:
    When I turn on my fcpx it seems it loads all events etc...and when it finish loading the frame is grey...no browser...no libraryes..
    please,
    I need help
    I'm working for a TV channel anb I'm really upset with this (kind of beta) program
    SOS
    I have a suggestion for you, salvaLosAngeles by submitting a feedback, within Final Cut Pro X feedback pull down menu, be sure to include this link to this discussion forum, so that Apple Final Cut Pro X software engineering team look into this.
    Also try to provide Apple detailed steps that led to what you are seeing.
    Hope this helps.
    Brian

  • Final Cut Pro crashes as insert text and go to control tab

    Hello All
    I just installed Final Cut Studio 2.0. when i go on to insert a text and move into control tab to edit the text, the program crashes. have anyone had any problem like this before? and if yes how did you manage to fix it?
    i must mention that i am on my way of cleaning out 2900 fonts (i do a lot of graphic works so need a lot of fonts, for different types of work) off my computer, could that be the problem?

    Did you ever get a solution to your problem that worked? I'm having the same problem. I've tried deleting FCP preferences and doing a reinstall, but I'm still having the same problem. The font conflict suggestion doesn't seem right. Even if I insert a new lower third video generated segment and then select the control tab, it still crashes even though I have inserted no text.
    Please let me know if you found a solution are not.

  • Final Cut Pro won't load anything and keeps crashing.. help!

    Just got FCP today  with my new MBP. It was working fine and it crashed. Now I open and it doesn't load the clips and the timeline doesn't show the preview. I've attached a screenshot. It opens for about 30 seconds then crashes. I tried reparing permissions but got nothing. Any ideas?
    As you can see dark blue areas shouldn't obviously have images but they aren't loading FCP is crashing

    What are the specs if your computer? What are the specs of your media?
    Trash your preferences. Trash event and project render files.

  • Can't Install: Final Cut Pro GREYED OUT... and no ProMediaIO.pkg file. ??

    Yes, I already have Logic Installed. And, yes, I've read ALL the other posts I can find... but I don't HAVE a ProMediaIO.pkg file ANY WHERE in my system. And I KNOW how to find these things
    This is maddening, and absolutely embarrassing that Apple hasn't provided a fix for this. It seems that a TON of people are having this exact same issue, but nothing I can find to solve this.
    And NO, using Pacifist to hack into the file doesn't count... although I guess I'll do it if I have to :P
    Any hints? Help?
    tx,
    e

    What Tom said.
    Alternatively, you may control-click the application and choose "Open" - this should present a dialog warning but allow you to proceed.
    This should only be necessary each time you start a given application *for the first time*. In the future, a mere double-click or any other standard method of starting the application will work.

Maybe you are looking for

  • Is there a way to share icloud storage plan with family members?

    I have set-up my icloud storage plan to 200G and i want to share the plan with my husband that only has the default, can i do that? I already have family sharing of photos, apps, etc.. but i want to share storage space. Thanks in advance.

  • How do I install Cs3 from disk, after trashing the trial version?

    I've made the mistake of trashing the trial version of Cs3 that I had on my imac a few years ago. Now I'd like to install photoshop cs3 on my imac as my other computer is out dated and I get the error message that CS3 is conflicting with CS3 on the c

  • Mac OS X 10.5 Leopard Features

    Is anyone willing to take a guess at what features we micht be able to find in Mac OS X Leopard? For me, I think these features would be great (and quite reasonable). - Finder built entirely on Spotlight metadata. The whole file structure would rely

  • Command button does not commit unless hit twice

    I'm using ADF/BC, 10.1.3.2 jdev. I have the following code in my backing bean:     public String cardLost() {         inputText12.setValue("1");          BindingContainer bindings = getBindings();         OperationBinding operationBinding =          

  • Is it possible to manage firefox security settings centrally for a network of windows clients?

    We want to add the Firefox browser to our network client build and managing the various settings (locking down?) centrally or setting defaults that suit our environment would be really useful. Internet Explorer can be managed using Group Policies in