HT4623 I can not get my Ipad to update the latest software rendering my Ipad useless. It keeps saying software update unavailable.

I can not get my IPAD to update the latest software the update says it is unavailable at this time try later I have been trying for 5 hours  any suggestions as this renders my IPAD useless

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Similar Messages

  • I can not get my Skylanders Portal of Power to sync with my ipad. I turned on Blue Tooth in setting on the ipad and pushed the sync button on the bottom of the portal but it never finds the device. Help

    I can not get my Skylanders Portal of Power to sync with my iPad. Blue Tooth is on in the settings and I push the sync button on the bottom of portal but it never finds the device. HELP

    Has anyone found a fix to this?

  • HT4061 I am unable to load Adobe Flash player on my Apple Ipad are there any clues out there how to by pass this,I can not get certain programs without it ,so I am returning my IPAD,any other programs I can load to get my programs

    I am unable to load Adobe Flash player on my Apple Ipad are there any clues out there how to by pass this,I can not get certain programs without it ,so I am returning my IPAD,any other programs I can load to get my programs

    Apple's iOS platform (iPhone, iPad, and iPod Touch) has never, and will never support flash.
    First on this; Thoughts on Flash. This is from Steve Jobs regarding Apple's views on Flash (2010)
    Second; Adobe stops making Flash for mobile devices. This is from Adobe themselves last year stating that they would stop making Flash for mobile devices.
    If you can find the App equivalent of the programs you are looking for, then congratulations, however, if you require specific 'programs' requiring flash, then the iPad is certainly not for you, and returning it would be the best choice (granted you are still within the return period).
    The lesson in this; Research what a device can and cannot do prior to purchase

  • I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI  inputs in the back.

    I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
    The receiver has two HDMI  inputs in the back.  However they say they are not for PC's.  Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables.  I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV.  But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
    My Email is [email protected] 
    Do you have any suggestions
    Thanks
    Bob

    I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
    Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
    Bob

  • HT4623 I can not get connected to App Store , download or update any apps,  EVEN I DID RESET ALL SETTING , STILL I RECIEVE A MESSAGE says: YOUR REQUEST IS NOT PROCESSED ,ERROR COD: 109 !! WHAT DOSE IT MEAN? HOW CAN I SOLVE THE PROBLEM??

    I can not get connected to AppStore , DOWNLOAD OR UPDATE ANY OF MY APPS , WHEN I GO FOR INSTALLING , THE MESSAGE SAYS: YOIR REQUEST IS NOT PROCESSED ,  ERROR CODE, 1009!!! HOW CAN I SOLVE THIS PROBLEM??

    Try contacting the iTunes support staff, they do the app store also, at:  http://www.apple.com/emea/support/itunes/contact.html

  • HT4623 I can not get past the license agreement and term and conditions page after updating my i5 IOS

    I can not get past the license agreement and term and conditions page after updating my i5 IOS

    Restart your phone and if that doesn't help, reboot the device.
    Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

  • I want to change my password but can not get passed verification even though the answers are correct, so I have asked for an email and none has come.Can some one help?

    I have tried to change my password and get to the part where you need to verify by answering the questions, and I get can not get any further, as it tells me the answers aren't the ones they have but I know it is correct, so I have asked for an email to be sent, but no email comes.I receive other emails from iTunes but not the one helping me to change the password. Has any one got any idea why?

    Contact iTunes customer support, no one in these user to user support forums can assist  you.

  • I have been using RoboForm. Now I can not use it even after PURCHASING THE latest vr!

    I have been trying for the last TWO days to get Roboform to work with the new Firefox! I have even ''purchased'' the latest version of Roboform but I still can not get its tool bar to appear on Firefox. After trying to follow your support's instructions, I can not get it to work with Firefox! I can get it to work with MS Windows Internet Explorer!
    What a mess! I will not use Firefox again!

    check out this link which answers your question http://support.apple.com/kb/HT1242
    after re reading your post, I think you need an SMC reset instead: http://support.apple.com/kb/ht3964
    what does activity monitor show? screenshots?

  • After update the latest iOS 4 my ipad screen sometimes continues moving

    Why after update the latest iOS 4.3, my ipad screen sometimes continues moving and hard to chose or touch the keyboard or icon?

    I have the exact same issue. The screen moves up and down just a little so the bars in the top left hand corner are almost hidden. And pressing icons does not work at times. Pressing buttons inside open apps does not work at times or takes forever to execute the command. Also, some apps freeze or open and then suddenly close. I updated all my apps to determine if the cause was an app that is not compatible with the new operating system. This did not work. Is there a way to update again? Could the problem be that the update was corrupted in some way? Any suggestions would be appreciated. It did not happen with my iPhone when I installed the update.

  • HT4623 i can not get ios 6 to download... so what should i do?

    how can i get ios 6 to install on my phoine i try and it says unable to install

    Can you give us some more detail. What is the exact error message? How are you downloading, when does it give the message?

  • Since updating to the new version the work web page that i use will only print 2 pages even if there are more. I can not get it to print all the pages in the document.

    for instance....I have a documents that has 6 pages, I can scroll down and see all the pages but when i hit the print button it will only print 2 pages. I tried to change it in the setting part but there is no feature that allows you to change it.

    For many years, Firefox has problems printing when some style rules are used. However, I am not aware of any changes for the worse in Fx4 (at least, until now I wasn't aware of any).
    A couple of thoughts:
    (1) Is it possible you were using an add-on in Fx3.6 that fixed this problem, but the add-on was disabled during the upgrade because it wasn't compatible? (Sometimes that can be fixed with a little hack.)
    (2) Are there any obvious settings differences that could be affecting printing, such as fonts, margins, or shrink-to-fit/percentage?
    (3) Does the workaround of selecting the entire page (Ctrl+a) and then choosing Selection under Print range in the Print dialog work? Unfortunately, this can slice through lines and images, but it often works around problems with style rules.
    In the interest of saving paper, it often is useful to experiment with a PDF printer driver. If you don't have pdfFactory, you can install a trial version for testing: it lets you view the results without first having to save the file. (If you save with the trial version, there is a footer to that effect.)
    (4) Is it an HTML5 problem? You can toggle the HTML5 parser off, but this is a global setting, not site-specific. If you are familiar with about:config, filter on html5 and double click '''html5.parser.enable''' to toggle its value from true to false. This helps for some sites, but has no effect on others.

  • How can I get Recipefox to work with the latest version (16) of Firefox?

    Recipefox worked on previous versions of Firefox. I could use the Grab It feature on many sites & easily retrieve recipes. Now, with the latest version of Firefox, it does not work on any of the recipe websites. Is there a more recent version of Recipefox that works with Firefox version 16, I am using 0.68. Does Recipefox get updated with newer versions of Firefox.

    Hi,
    You can try to right-click and '''Find Updates''' via '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions'''. You can also '''Remove''' it, and search and install via the Search box on the top right or from [https://addons.mozilla.org/en-US/ AMO].
    [https://support.mozilla.org/en-US/kb/Using%20extensions%20with%20Firefox Using Extensions]
    If problems persist you can reset Firefox and start afresh with [https://addons.mozilla.org/en-US/firefox/addon/recipefox/?src=search recipefox].
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • I can not get my iPod to sync the computer recognizes it as a camera can you help

    I have synced a lot of iPods to my computer but nothing this new the computer recognizes it  as a camera for the Kodak easy share that is on it did I not set something up right to begin with can you help

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    It is normal and expcted for a computer to see the iPod as a camera since that is how you get photo off the iPod.

  • LabVIEW Touch Panel -- I can not get activesync to connect between the TPC-2012 and my XP workstation. There is no USB client connection on TPC-2012

    How do I get the TPC-2012 to connect to my workstation?  I have read all the hardware manuals, getting started manuals: nothing works.  The remote access using http://x.x.x.x/RemoteAdmin does not work.  I have tried to get the FTP service working using the instructions in "How do I configure the FTP server on tpc-2006 and TPC-2016" .  Active sync seems to want a USB connection only.  I have tried to connect a serial line between com1 on the TPC and com4 on my XP workstation with no results.
    I have been able to use the touch panel module with my iPAQ. It worked flawlessly the first time.  
    Help!
    Louis Prugh
    General Dynamics

    Hi David,
    thank you once again for your help.
    So when viewing your Local Area Connection>>Status
    you're seeing data packets sent but no packets received on your desktop
    machine? - Yes
    Is your desktop configured with a static IP address or is it
    configured to obtain an IP address automatically?I' ve tried both static IP address and that it obtain IP address automatically, I have also done it with the TPC.
    Also, does your TPC
    get a valid IP address when the connection to your desktop is present? - when TPC is set to obtain adress automatically it gets IP address and then after some time it loses it - it is set to 0.0.0.0, and then it obtains the IP adress again and so on.
    Can you provide the address, subnet, and gateway you're getting for
    both machines?- I've done it, but it didn'e help
    Also any firewall settings or exceptions you may have
    active if the firewall is enabled? - firewall is disabled
    I'd also like to know what
    modules and toolkits you do have installed on both the TPC - TPC is new and I haven't installed there anything.
    On my desktop - I have standard Labview 8.2,the real time module is installed. All I know, there are already drivers for TPC2012 in this LabView version. On the included CD I have only drivers for another TPCs.
    Thanks,
    Martin

  • When I close firefox it doesn't really close it seems to be hidden. Then when I try to start it again I have to Alt, Ctrl, Del, go to process , turn it off then hit it to start again. I can not get it to open in the hidden process that it is in

    Apparently when I close Firefox it doesn't really close. I get told when I try to open Firefox later "Firefox is still open, you must close Firefox, Then reopen it. Then I hit Alt, Ctrl & Del, go to process's then I have to close it then reopen it. It does not open until it is closed in process's.

    The process can take a few seconds to close. Sometimes you need to use Task Manager.

Maybe you are looking for

  • CS2 Premium not working after re installing on Windows Vista

    I reformatted my computer and re installed CS2 Premium in a new laptop with Windows Vista; however, when trying to open one of the applications such as Photoshop it says "user name, organization, or serial number is missing or invalid." Adobe does no

  • How to get value in HKEY_LOCAL_MACHINE in Java code

    Our system use Apache-Tomcat. My java program needs to get the registry information (server name, port number,...) in HKEY_LOCAL_MACHINE on the same computer. Could it be done without JNI? Please forward instruction. Thanks.

  • Unable to create content properly in UCM 11G

    Hi All,    We are generating content ID's using Profile Rule activation condition -> Side Effects, below is the sample script we used in rule <$dDocName="LIT_DOC_"&strGenerateRandom(8)&".PDF"$> In 10G we are able to create contents properly using thi

  • Disable warning msg IE/Firefox

    I have a form, from which the user at one point clicks a link to navigate away from the page, and then returns to continue the form (all takes place in one window). If the user changes data on the form before navigating away, IE/Firefox popup a warni

  • Problem in start of SAP on AIX

    Hello Gurus, We are facing problem in our test server. lpar1:prdadm 1> ulimit -a time(seconds)        unlimited file(blocks)         unlimited data(kbytes)         unlimited stack(kbytes)        unlimited memory(kbytes)       32768 coredump(blocks)